Smeg CW400BS - Manual

  4 The wood and cardboard components can be disposed of by respecting the norms in vigor. When disposing of the product, avoid leaving it in the environment; its disposal must respect the norms in vigor. All of the metallic parts are in stainless steel and are detachable. The plastic parts are mark...

  5   5 FIRST STARTUP FIRST STARTUP The electrical protection system must be subjected to a functional test before use. The installation must be performed and/or verified by the authorized reseller who will be responsible for the first startup and the instructions relative to the dishwasher’s operat...

  6 ZERO CROSSING : The relay which powers the Tank’s electrical resistance is equipped with the “ zero crossing “ function which synchronizes the switching of this relay, both in closing and in opening, with the voltage supply’s passing to zero both for 50 Hz and 60 Hz frequencies. In this manner t...

  7   KEYBOARD FUCNTIONALITY CW400RSD – CW400R MAIN FUNCTIONS WITH MACHINE POWERED ITEM Description Function L1 Machine powered led indicator This led indicator turns on (green) when electrical current is present L2 Tank emptying led indicator This led indicator (green) indicates that the machine is...

  9   Regeneration mode: Once having reached the set number of cycles, at the end of the last cycle (ex. The 20 th or the 35 th , etc.) the message rig will appear flashing on the display for 10”; of it is desired to continue and the request is ignored, the message will appear for 10” at the end of ...

  10 8 USER INSTRUCTIONS FOR MODELS: CW400R - CW400RSD On/Off button Program selection button Start button CONFIRM/PAUSE Complete emptying button (Tank and boiler) Additional functions selection button L1 Power supply indicator light L2 Cycle in function indicator light input/waiting (red/green) L3 ...

  12 Once the program has finished the message “END” appears on the display. The led indicator remains red. Basket removal By closing the door the last executed program is proposed again and the led indicator turns green Note: While the water in the boiler and in the Tank is heating up, the display ...

  13 Once draining has been completed the machine goes into standby, indicated by the appearance of dashes “---“ upon the display. Turn the machine back on by pressing and afterwards press the button. The regeneration cycle starts and moving dashes appear on the display; after 20 minutes the regener...

  14 9 USER INSTRUCTIONS FOR MODELS: CW350B-CW350BSD-CW350-CW350SD-CW400B-CW400BSD   On / Off button Basin emptying button (only in models with drain pump) Regeneration cycle Wash program selection button Start cycle button Brief cycle led indicator Long cycle led indicator Led indicator functions L...

  17 Regeneration cycle (for models equipped with water softeners) For models equipped with drain pumps, perform a drain cycle before executing the regeneration cycle. For models not equipped with drain pumps, remove the overflow and close the door. Press the button to select the option. The led ind...

  18 In case of particularly heavy usage it is recommended to perform a cleaning of the filter every 30-40 wash cycles in order to maintain the machine in operative conditions; Use “partial Tank draining” in order to perform these cleanings. Remove the filters (it is sufficient to lift them out of t...