Page 3 - Description of washing machine; Technical information
185426 1. Front panel 2. Detergent dispenser 3. Door (depending on the model) 4. Filter lid 5. Adjustable legs 6. Water outlet hose 7. Water inlet hose 8. Mains power cable • Model (WA63xxx, WA64xxx) Dimensions (w x d x h): 600 mm x 600 mm x 850 mm Depth with door open: 106 cm Weight (net): 90 kg No...
Page 4 - Cautions
185426 • Be sure to remove transport brackets prior first use of the appliance. Attempted operation of the blocked machine may result in irreparable damage which is not covered by the manufacturer’s warranty! • When connecting your washing machine to water supply, be sure to use brand new water inle...
Page 6 - Installation and connection; Package removal
185426 In removing the wrapping be careful not to damage the appliance with a sharp object. Before connecting the appliance, let it warm up to room temperature (wait for two hours). • Our appliances are packed in environmentally friendly materials which may be recycled, deposited or decomposed witho...
Page 7 - After the adjustment tighten the nuts firmly (A); hose thread Screw the hose thread to the water; Water inlet connection
185426 • Put the appliance in horizontal position by turning the adjustable legs. The legs are adjustable up to +/- 1 cm. After the adjustment tighten the nuts firmly (A) - towards the bottom of the machine! Vibrations, moving of the appliance and loud operation due to incorrect setting of the adjus...
Page 8 - In such cases washing is suspended, machine; Do not immerse the Aqua-stop system inlet; minimum 60 cm and maximum 100 cm above the; Water outlet connection
185426 Partial Aqua-stop (water stop system) In case of damage on the interior pipe, leaking is prevented by automatic closing system which stops water inlet to the machine. In such cases display A turns red. Inlet pipe must be replaced. Complete Aqua-stop In case of damage on the interior pipe, lea...
Page 10 - Functional knobs; - Use this knob to scroll around main menu.; Program selector; Operation
185426 Functional knobs Knob B (MENU) - Use this knob to scroll around main menu. Knob C (SELECTOR) - Use this knob to scroll around main menu. Knob F (START/PAUSE) - Use it to start or finish the program. A - program selector B - MENU knob C - SELECTOR knob D - quick wash E - easy iron knob F - STA...
Page 11 - - Selecting language; Add washing and treatment agents (detergent and; Open the door of the machine.; Door is opened by pulling the handle (lever) on the; Sort the laundry by the type of fabrics; Washing procedure
185426 - Selecting language To change the language in which the information appear on the display, press simultaneously the key MENU (B) and SELECTOR(C), and turn the program selector (A) from position “0” to the first program in clockwise direction (Cotton 95°C). The name of actually selected langu...
Page 12 - symbols on the last page of these; or; Washing machine
185426 symbols on the last page of these instructions). - Load the laundry into the drum. Check that the drum is empty. - Close the door of the appliance. - Open the water inlet faucet. - Switch the machine on. 1. Name of the program, 2 . Duration or time of day, 3. Symbols for activation of additio...
Page 13 - additional functions; Synthetic
185426 selector (A) to the desired program. The display indicates the selected program, along with basic settings. With each basic program you may also select additional functions . Cotton: whites/colored Normally stained cotton and flax bed linen and underwear, table cloth, bathroom towels, top gar...
Page 14 - Mixed; - Selection of additional function; Washing and rinsing time is reduced.; Easy iron; - Selection of additional functions using the MENU
185426 Mixed Special program for washing normally stained colored laundry made from various resistant fabrics at 30°C. - Selection of additional function ( , , , , , , , , , ) The display always indicates only the menus with functions which are available for a particular program. Certain functions m...
Page 17 - Caution; : prior this setting check whether the current
185426 the SELECTOR knob (C) on programs for cotton, synthetic, delicate and mixed laundry. Soaking This program is intended for removal of stubborn stains. In default setting the soaking function is off. It is engaged by pressing the SELECTOR knob (C). Soaking time may be set from 1 h to maximum 6 ...
Page 18 - Child protection
185426 SELECTOR knob (C) until the required time to end the washing appears on display. Caution: If Water clean sensor is engaged, the program may last longer for extra rinsing time. In case you wish to change or suspend the end of washing time after starting the machine with the START knob (F), you...
Page 19 - - Selecting of partial programs
185426 Permanent disengagement of the function: a.) During the operation: - Keep the MENU knob (B) pressed for 4 seconds. - Stop the program by pressing the START/PAUSE knob (F). - Using the MENU knob (B) move to child lock option. - Press the SELECTOR knob (C) to disengage the function. b.) After t...
Page 20 - - Adding washing and softening agents; main wash compartment; When adding softener, be careful to fill the; Start the operation
185426 Drain Use it when the washing program was interrupted or if rinse hold function was engaged, and you only wish to pump the water out of the drum, without spinning. Spin Aggressive spinning for non-delicate laundry at high spin RPM. Spin revolutions can be altered. - Adding washing and softeni...
Page 21 - continued where it had been interrupted.; Interruptions
185426 START knob (F) and the machine will finish the program with the spin, determined by that particular program. In case you would like to alter the washing program, turn the program selector to the position “0”, followed by the selector of rinse or merely pumping the water out. - End of operatio...
Page 22 - interrupted, and when the power is restored the; If a power failure occurs when the drum is; Special functions
185426 Permanent suspension - change of program By turning the program selector to the position “0” the program is permanently suspended. Consequently you may select a new program (see Program selector). • Failures Program is suspended in case a failure occurs. This is signalled by the relevant read...
Page 23 - Setting the Water clean sensor; to start
185426 way as hours. - Confirm setting by pushing the MENU knob (B). - Return the program selector back to “0” position. Set time is automatically saved. • Setting the Water clean sensor In order for the Water clean sensor to start working properly, it must be first calibrated with water that the wa...
Page 24 - Maintenance chart; and add more detergent.; Program chart; Tips for washing and energy saving
185426 • Before washing sort out the laundry according to the type, degree of dirtiness and color resistance. • Prior selecting the washing program consult the sewn tab with information on a particular piece of laundry (see Maintenance chart on the last page). • Wash separately the new colored texti...
Page 25 - dispenser compartment ducts.; Do not put clods of detergent into the
185426 • If you do not apply the program which includes the pre-wash feature, you may add washing detergent directly into the drum. • If you use thick liquid softener it is recommended to dilute it with water, to prevent clogging of dispenser compartment ducts. • Washing machine is equipped with the...
Page 26 - Cleaning and maintenance
185426 Disconnect the washing machine from the mains before cleaning! • The casing should be cleaned with soft cloth and mild detergent. • The interior of the drum and the door gasket is cleaned by washing at 60°C without laundry and adding half quantity of detergent. • If necessary, clean the deter...
Page 27 - Wash it under running water using a brush, and
185426 • Wash it under running water using a brush, and dry it. Remove any leftover dried detergent from the bottom of the casing. • Clean the entire rinsing area of the washing machine with a brush, especially the nozzles on the upper side of the rinsing chamber. • Clean frequently the water inlet ...
Page 29 - identifies the type of failure.; In case the machine signals faults number you have to wait for; signalization of different faults. In such cases:; Failure; Failures
185426 If the washing machine identifies failures in the operation, it reports it immediately. Sound alarm is heard and the display reads ERROR. Number identifies the type of failure. In some cases you may attempt removing certain failures yourself (see the chart below), and the machine will continu...
Page 32 - Tables
185426 * Testing program by EN 60456 with the selection of max. spin RPM. ** Depending on the model. 32 Basic programs Type of laundry Max. load (kg) Temp. (°C) Spin (RPM) Water cons. l Energy cons. kWh RPM RPM 800 - 900 1000 - 1300 1400 - 1800 800 - 900 1000 - 1300 1400 - 1800 Cotton 6 95 max. 1800...
Page 33 - Additional functions
185426 Program chart/ Additional functions possibility Program Quick wash Easy iron S pi n sp ee d / Rinse hold Extra rinse / water clean sensor Hi gh er w at er le ve l Pre-wash Soaking Cold washing Basic programs Cotton / / Heavy soil / / Synthetic / /...
