Page 2 - Your new washing machine; Display rules
2 Your new washing machine You have chosen a Siemens washing machine. Please take a few minutes to read and become familiar with the advantages of your washing machine. To meet the high quality demands required by Siemens, every washing machine that leaves our factory is carefully checked to ensure ...
Page 3 - Contents; Faults and what to do about
en 3 Contents enWashing machineInstruction Manual and Installation Instructions 8 Intended use. . . . . . . . . . . . . . . . .4 ( Safety instructions . . . . . . . . . . .5 Electrical safety. . . . . . . . . . . . . . . . . . 5 Risk of injury . . . . . . . . . . . . . . . . . . . . 5 Safety for chi...
Page 4 - are
en Intended use 4 4 After-sales service . . . . . . . . . . 24 J Technical data . . . . . . . . . . . . . . 25 5 Positioning and connecting. . . 25 Included with the appliance . . . . . . . 25 Safety instructions . . . . . . . . . . . . . . 26 Installation surface . . . . . . . . . . . . . . 26 Inst...
Page 5 - Safety instructions; Electrical safety
Safety instructions en 5 ( Safety instructions Safety instructions Electrical safety : Warning Danger of death! There is a risk of electric shock if you touch live components. ■ Never touch or hold the mains plug with wet hands. ■ Only pull out the mains cable by the plug and never by the cable, as ...
Page 6 - Environmental; Packaging/used appliance
en Environmental protection 6 ■ Cut through the mains cable and remove it, along with plug. ■ Destroy the lock on the washing machine door. : Warning Risk of suffocation! Children may become wrapped in packaging/film or packing parts if allowed to play with them, or they may pull them over their hea...
Page 7 - Getting to know the appliance; Washing machine
Getting to know the appliance en 7 * Getting to know the appliance Getting to know the appliance Washing machine # 6 7 ( Detergent drawer 9S Open the washing machine door 0 Control/display panel 9T Close the washing machine door 8 Washing machine door with handle @ Service flap with or without a dra...
Page 8 - Control panel; settings in the overview these differ depending on the model.; Display panel; these differ depending on the model.; Programme selector
en Getting to know the appliance 8 Control panel Note: You can find possible programme default settings and additional programme settings in the overview; these differ depending on the model. Display panel Note: The table shows possible setting options and information in the display panel; these dif...
Page 9 - Prepare the laundry; Damage to the appliance/fabrics; Sorting laundry; Light
Laundry en 9 Z Laundry Laundry Prepare the laundry Caution! Damage to the appliance/fabrics Foreign objects (e.g. coins, paper-clips, needles, nails) may damage the laundry or components in the washing machine. Therefore, note the following tips when preparing your laundry: ■ Empty pockets. ■ Look o...
Page 10 - Notes; Correct selection of detergent
en Detergent 10 Starching Note: Laundry must not be treated with fabric softener. Starching is possible in all wash programmes if liquid starch is used. Measure starch into compartment M in accordance with the manufacturer's instructions (clean first if necessary). Dyeing/bleaching Dye should only b...
Page 11 - Saving energy and detergent; Programme default; Spin speed; Saving
Programme default settings en 11 Saving energy and detergent For light and normal soiling, you can save energy (lower washing temperature) and detergent. Note: When measuring the amount of all detergents/additives/care products and cleaning agents, please always check the manufacturer's instructions...
Page 12 - Ready in time; Before starting the programme; Additional programme; Speed Perfect; speed Perfect; Eco Perfect
en Additional programme settings 12 Ready in time ( 0 ) Before starting the programme , the programme end Ready in time can be preselected in hourly increments (h = hours) up to a maximum of 24 hours. 1. Select the required programme. Note: . The programme duration is displayed in the display panel....
Page 13 - must be
Operating the appliance en 13 1 Operating the appliance Operating the appliance Preparing the washing machine Note: The washing machine must be correctly installed and connected . From ~ Page 25 . 1. Plug in the mains plug. 2. Turn the tap on. 3. Open the washing machine door. 4. Check that the drum...
Page 14 - Placing laundry into the drum; Warning; Measure and add detergent; Damage to the appliance; Page 9
en Operating the appliance 14 Placing laundry into the drum : Warning Risk of death! Items of laundry pretreated with cleaning agents that contain solvents, e.g. stain remover/cleaning solvent, may cause an explosion after being loaded into the washing machine. Hand-rinse these items of laundry thor...
Page 15 - Start the programme; Page 8; II
Operating the appliance en 15 Filling : Warning Eye/skin irritation! Detergent and care products may spray out if the detergent drawer is opened while the machine is in operation. Open the drawer carefully. Rinse eyes or skin thoroughly if they come into contact with detergent/care products. If swal...
Page 16 - Childproof lock; activate; Adding laundry; YES; Changing the programme
en Operating the appliance 16 Childproof lock Prevent the set functions of the washing machine from being accidentally changed by activating the childproof lock when the programme has started.To activate the childproof lock, press and hold the "Start" button for approx. five seconds. ²» appe...
Page 17 - Automatic load sensing
Sensors en 17 Removing laundry/switching off the appliance 1. Open the washing machine door and remove the laundry. Notes – If you cannot open the washing machine door, the appliance is still locked. Wait until the programme ends. – If the display panel does not light up, energy-saving mode is activ...
Page 18 - Setting the signal; Set the button and information signals
en Setting the signal 18 M Setting the signal Setting the signal 1. Set the button and information signals Set the programme selector to the "Off" position and then turn the dial one position to the right. Press the button for Eco Perfect ¦ , hold it down and, at the same time, turn the prog...
Page 19 - Machine housing/control
Cleaning and maintenance en 19 2 Cleaning and maintenance Cleaning and maintenance : Warning Danger of death! There is a risk of electric shock if you touch live components. Switch off the appliance and unplug the mains plug. : Warning Risk of poisoning! Toxic vapours can be produced by cleaning age...
Page 21 - Faults and what to do; Emergency release
Faults and what to do about them. en 21 The drain hose at the siphon is blocked 1. Switch off the appliance. Disconnect the mains plug. 2. Loosen the hose clamp. Carefully remove the drain hose, residual water may leak out. 3. Clean the drainage hose and siphon connecting piece. 4. Reattach the drai...
Page 22 - Water damage; Information on the display panel; Display
en Faults and what to do about them. 22 Caution! Water damage Any escaping water may cause water damage. Do not open the washing machine door if water can be seen through the glass. 1. Set the programme selector to the Off position. Remove the mains plug. 2. Drain the water. Pull the emergency relea...
Page 23 - Faults
Faults and what to do about them. en 23 Faults and what to do about them. Faults Cause/remedy Water is leaking from the appliance. ■ Attach the drain hose correctly or replace it. ■ Tighten the threaded joint on the inlet hose. The appliance is not filling with water.Detergent is not being dis- pens...
Page 25 - Power consumption when switched; Positioning and connecting; Included with the appliance; In addition; Mains cable
Technical data en 25 J Technical data Technical data Dimensions: 60 x 55 x 85 cm(width x depth x height) Weight: 66 - 73 kg* Mains connection: Nominal voltage: 220-240 V, 50 HzNominal current: 10 A / 13 A*Nominal power: 2300 W Water pressure: 100 - 1000 kPa (1-10 bar)* Depending on the model Power c...
Page 27 - Removing the transport locks; Hose and cable lengths; aFP; PLQFP
Positioning and connecting en 27 Removing the transport locks Caution! Damage to the appliance ■ The machine is secured for transportation using transport locks. If the transport locks are not removed, the drum, for example, may become damaged when the machine is operated. Before using the appliance...
Page 28 - Water inlet
en Positioning and connecting 28 Water inlet : Warning Risk of death! There is a risk of electric shock if you touch live components. Do not immerse the Aqua-Stop safety valve in water (it contains an electric valve). Observe the following when connecting the machine: Notes ■ With a cold water conne...
Page 29 - Water outlet
Positioning and connecting en 29 Cold water connection Connect the water supply hose to the water tap (¾" = 26.4 mm) and to the appliance (not necessary for Aqua-Stop models as this is permanently installed): ■ Model: Standard ■ Model: Aqua-Secure ■ Model: Aqua-Stop Note: Carefully turn on the t...
Page 30 - Levelling
en Positioning and connecting 30 ■ Outlet into a plastic pipe with rubber bushing or into a drainage pit Levelling Level the appliance using a spirit level.Incorrect levelling may result in intense noise, vibrations and "wandering". 1. Loosen the lock nuts using a wrench, by turning it in a ...
Page 31 - Transportation
Positioning and connecting en 31 Before washing for the first time The washing machine was thoroughly tested before leaving the factory. In order to remove any water which may be left over from the test, run the first washing cycle without any laundry. Notes ■ The washing machine must be correctly i...
Page 32 - Repair order and advice in the event of faults; IE
BSH Hausgeräte GmbHCarl-Wery-Straße 34 81739 MünchenGERMANY *9000935827* 9000935827 (9503) siemens-home.com Aqua-Stop warranty Only for appliances with Aqua-Stop In addition to warranty claims against the vendor based on the purchase agreement and to our appliance warranty, we will provide compensat...
