Siemens WM14Q391GB - Manuals

Safety instructions en 5 ( Safety instructions Safety instructions Electrical safety : Warning Danger of death! There is a risk of electric shock if you touch live components. ■ Never touch or hold the mains plug with wet hands. ■ Only pull out the mains cable by the plug and never by the cable, as ...

en Environmental protection 6 ■ Cut through the mains cable and remove it, along with plug. ■ Destroy the lock on the washing machine door. : Warning Risk of suffocation! Children may become wrapped in packaging/film or packing parts if allowed to play with them, or they may pull them over their hea...

Getting to know the appliance en 7 * Getting to know the appliance Getting to know the appliance Washing machine # 6 7 ( Detergent drawer 9S Open the washing machine door 0 Control/display panel 9T Close the washing machine door 8 Washing machine door with handle @ Service flap with or without a dra...

en Getting to know the appliance 8 Control panel Note: You can find possible programme default settings and additional programme settings in the overview; these differ depending on the model. Display panel Note: The table shows possible setting options and information in the display panel; these dif...

Laundry en 9 Z Laundry Laundry Prepare the laundry Caution! Damage to the appliance/fabrics Foreign objects (e.g. coins, paper-clips, needles, nails) may damage the laundry or components in the washing machine. Therefore, note the following tips when preparing your laundry: ■ Empty pockets. ■ Look o...

en Detergent 10 Starching Note: Laundry must not be treated with fabric softener. Starching is possible in all wash programmes if liquid starch is used. Measure starch into compartment M in accordance with the manufacturer's instructions (clean first if necessary). Dyeing/bleaching Dye should only b...

Programme default settings en 11 Saving energy and detergent For light and normal soiling, you can save energy (lower washing temperature) and detergent. Note: When measuring the amount of all detergents/additives/care products and cleaning agents, please always check the manufacturer's instructions...

en Additional programme settings 12 Ready in time ( 0 ) Before starting the programme , the programme end Ready in time can be preselected in hourly increments (h = hours) up to a maximum of 24 hours. 1. Select the required programme. Note: . The programme duration is displayed in the display panel....

Operating the appliance en 13 1 Operating the appliance Operating the appliance Preparing the washing machine Note: The washing machine must be correctly installed and connected . From ~ Page 25 . 1. Plug in the mains plug. 2. Turn the tap on. 3. Open the washing machine door. 4. Check that the drum...

en Operating the appliance 14 Placing laundry into the drum : Warning Risk of death! Items of laundry pretreated with cleaning agents that contain solvents, e.g. stain remover/cleaning solvent, may cause an explosion after being loaded into the washing machine. Hand-rinse these items of laundry thor...

Operating the appliance en 15 Filling : Warning Eye/skin irritation! Detergent and care products may spray out if the detergent drawer is opened while the machine is in operation. Open the drawer carefully. Rinse eyes or skin thoroughly if they come into contact with detergent/care products. If swal...

en Operating the appliance 16 Childproof lock Prevent the set functions of the washing machine from being accidentally changed by activating the childproof lock when the programme has started.To activate the childproof lock, press and hold the "Start" button for approx. five seconds. ²» appe...

Sensors en 17 Removing laundry/switching off the appliance 1. Open the washing machine door and remove the laundry. Notes – If you cannot open the washing machine door, the appliance is still locked. Wait until the programme ends. – If the display panel does not light up, energy-saving mode is activ...

en Setting the signal 18 M Setting the signal Setting the signal 1. Set the button and information signals Set the programme selector to the "Off" position and then turn the dial one position to the right. Press the button for Eco Perfect ¦ , hold it down and, at the same time, turn the prog...

Cleaning and maintenance en 19 2 Cleaning and maintenance Cleaning and maintenance : Warning Danger of death! There is a risk of electric shock if you touch live components. Switch off the appliance and unplug the mains plug. : Warning Risk of poisoning! Toxic vapours can be produced by cleaning age...

Faults and what to do about them. en 21 The drain hose at the siphon is blocked 1. Switch off the appliance. Disconnect the mains plug. 2. Loosen the hose clamp. Carefully remove the drain hose, residual water may leak out. 3. Clean the drainage hose and siphon connecting piece. 4. Reattach the drai...

en Faults and what to do about them. 22 Caution! Water damage Any escaping water may cause water damage. Do not open the washing machine door if water can be seen through the glass. 1. Set the programme selector to the Off position. Remove the mains plug. 2. Drain the water. Pull the emergency relea...

Faults and what to do about them. en 23 Faults and what to do about them. Faults Cause/remedy Water is leaking from the appliance. ■ Attach the drain hose correctly or replace it. ■ Tighten the threaded joint on the inlet hose. The appliance is not filling with water.Detergent is not being dis- pens...

Technical data en 25 J Technical data Technical data Dimensions: 60 x 55 x 85 cm(width x depth x height) Weight: 66 - 73 kg* Mains connection: Nominal voltage: 220-240 V, 50 HzNominal current: 10 A / 13 A*Nominal power: 2300 W Water pressure: 100 - 1000 kPa (1-10 bar)* Depending on the model Power c...

Positioning and connecting en 27 Removing the transport locks Caution! Damage to the appliance ■ The machine is secured for transportation using transport locks. If the transport locks are not removed, the drum, for example, may become damaged when the machine is operated. Before using the appliance...

en Positioning and connecting 28 Water inlet : Warning Risk of death! There is a risk of electric shock if you touch live components. Do not immerse the Aqua-Stop safety valve in water (it contains an electric valve). Observe the following when connecting the machine: Notes ■ With a cold water conne...

Positioning and connecting en 29 Cold water connection Connect the water supply hose to the water tap (¾" = 26.4 mm) and to the appliance (not necessary for Aqua-Stop models as this is permanently installed): ■ Model: Standard ■ Model: Aqua-Secure ■ Model: Aqua-Stop Note: Carefully turn on the t...

en Positioning and connecting 30 ■ Outlet into a plastic pipe with rubber bushing or into a drainage pit Levelling Level the appliance using a spirit level.Incorrect levelling may result in intense noise, vibrations and "wandering". 1. Loosen the lock nuts using a wrench, by turning it in a ...

Positioning and connecting en 31 Before washing for the first time The washing machine was thoroughly tested before leaving the factory. In order to remove any water which may be left over from the test, run the first washing cycle without any laundry. Notes ■ The washing machine must be correctly i...

BSH Hausgeräte GmbHCarl-Wery-Straße 34 81739 MünchenGERMANY *9000935827* 9000935827 (9503) siemens-home.com Aqua-Stop warranty Only for appliances with Aqua-Stop In addition to warranty claims against the vendor based on the purchase agreement and to our appliance warranty, we will provide compensat...