Siemens 125-3584T - Manuals

How to Use This Manual Contact Us 9 Siemens Industry, Inc. 125-3584T Convention Examples Numbered Lists (1, 2, 3…) indicate a procedure with sequential steps. 1. Turn OFF power to the field panel. 2. Turn ON power to the field panel. 3. Contact the local Siemens Solution Partner, Authorized TALON De...

Chapter 1 - Introduction to Field Panel Web Server Applications 10 Siemens Industry, Inc. 125-3584T Chapter 1 - Introduction to Field Panel Web Server The Graphical User Interface software or files can only be loaded into a TC Modular or TC Compact 36 controller. Due to space constraints, the Web Se...

Chapter 2 - Field Panel Web Server System Administration Chapter Overview 13 Siemens Industry, Inc. 125-3584T Chapter 2 - Field Panel Web Server System Administration Chapter Overview Chapter 2 discusses the following topics:  Prerequisites and Browser Requirements for Field Panel Web Server  Prer...

Chapter 2 - Field Panel Web Server System Administration Prerequisites for FINlite Graphics Tool 14 Siemens Industry, Inc. 125-3584T Verifying that Adobe Flash has been Installed Adobe Flash Player Plug-In Version 10.1 or later is required for the Field Panel Web Server. In Internet Explorer (IE), c...

Chapter 2 - Field Panel Web Server System Administration Enabling or Disabling Web Server 15 Siemens Industry, Inc. 125-3584T Be sure that the FPWeb license is installed on the field panel. HMI S, H, E, W, M (System, Hardware, Ethernet, Webserver, Modify Example 10:13:04 07/30/2010 FRI Logged on suc...

Chapter 2 - Field Panel Web Server System Administration Loading the User Interface 16 Siemens Industry, Inc. 125-3584T Loading the User Interface Be sure that the FPWeb license is enabled for each field panel. Recommended Method: Loading or Upgrading the User Interface via Human-Machine Interface (...

Chapter 2 - Field Panel Web Server System Administration Performance and Limitations 17 Siemens Industry, Inc. 125-3584T  Use the HMI “Uiupgrade” function (System/Hardware/Ethernet/Webserver/Uiupgrade)  Use FTP to transfer the uiupgrade.txt file from Vantage Web site or your computer to the root o...

Chapter 2 - Field Panel Web Server System Administration Performance and Limitations 18 Siemens Industry, Inc. 125-3584T – PNY Attache (U3) 1GB – PNY Attache 2GB – PNY Attache 8GB – PQI MMC/SD reader – RedLeaf USB 2.0 256MB flash disk – SanDisk Cruzer USB 2.0 256MB flash disk – SanDisk Cruzer Micro ...

Chapter 2 - Field Panel Web Server System Administration System Security 19 Siemens Industry, Inc. 125-3584T Allow Browser Caching of Adobe Flash Player This setting will be particularly helpful once the panel database is stable. This allows the Field Panel Web Server to keep information about the p...

Chapter 2 - Field Panel Web Server System Administration Language Support 20 Siemens Industry, Inc. 125-3584T User access to the Field Panel Web Server is controlled through individual User Accounts. Each User Account has access levels determined by a system administrator, which grant or deny permis...

Chapter 3 - User Interface Navigation Overview Welcome Page/Logon 21 Siemens Industry, Inc. 125-3584T Chapter 3 - User Interface Navigation Overview Welcome Page/Logon Begin a Field Panel Web Server session with a Web browser URL request to the panel, using either its IP address or panel name/Fully ...

Chapter 3 - User Interface Navigation Overview User Interface after Logon 22 Siemens Industry, Inc. 125-3584T Configuring the Welcome Page Graphic Field Panel Web Server provides a Welcome page image, which can be changed by the user. To change the image on the Welcome page: 1. Create a custom image...

Chapter 3 - User Interface Navigation Overview User Interface after Logon 23 Siemens Industry, Inc. 125-3584T Status Bar User Interface The Status Bar at the top includes the following features:  Alarms, Unack, Faults, Out Of Service, and Device Failures buttons indicate a count for the number of i...

Chapter 3 - User Interface Navigation Overview User Interface after Logon 24 Siemens Industry, Inc. 125-3584T The navigation pane on the left side includes six horizontal main application bars. These main application bars allow you to access the available applications. For descriptions of icons used...

Chapter 3 - User Interface Navigation Overview User Interface after Logon 25 Siemens Industry, Inc. 125-3584T  Scheduling: This application bar provides a tree view of panels and their associated Schedule, Command, and Calendar objects. Clicking on a specific Schedule object in this tree view launc...

Chapter 3 - User Interface Navigation Overview User Interface after Logon 26 Siemens Industry, Inc. 125-3584T Inaccessible Panels Panels on the ALN that are not web-enabled will be identified in the Navigation Pane as grayed out. These panels are not accessible in any Web Server editor applications ...

Chapter 3 - User Interface Navigation Overview User Interface after Logon 27 Siemens Industry, Inc. 125-3584T When a panel database file has been synchronized, the table will update the panel status: When all panel database files are synchronized, the status table will disappear, a successful databa...

Chapter 3 - User Interface Navigation Overview User Interface after Logon 28 Siemens Industry, Inc. 125-3584T After a successful logon, the Application Area will either be blank or loaded with the “Default.fnl” graphic file loaded in a Graphics View application tab. See the FINlite Graphics Tool sec...

Chapter 4 - Status Bar Status Bar Counts and Reports 30 Siemens Industry, Inc. 125-3584T Chapter 4 - Status Bar Status Bar Counts and Reports Running an Alarm Report Alarm details can be viewed in the Alarm report, which is accessible via the Status Bar (see the User Interface Navigation Overview se...

Chapter 4 - Status Bar Setup 31 Siemens Industry, Inc. 125-3584T 1. Run an Alarm Report or an Unack report (see the Running an Alarm Report section). 2. Click the Unacknowledged button in the Acknowledge State column associated to the desired alarm.  The button displays Acknowledged in the Acknowle...

Chapter 5 - Point Commander Chapter Overview 34 Siemens Industry, Inc. 125-3584T Chapter 5 - Point Commander Chapter Overview Chapter 5 discusses the following topics:  Point Commander Application Overview – Tips for Using the Point Commander Application – User Interface Description for the Point C...

Chapter 5 - Point Commander Point Commander Application Overview 35 Siemens Industry, Inc. 125-3584T CAUTION Command points only when you know the possible effects of making a change.Ideally, only command points when making temporary changes, such as setpoint changes, or when commanding modes of ope...

Chapter 5 - Point Commander Point Commander Application Overview 36 Siemens Industry, Inc. 125-3584T Close the Commander window by clicking the X in the top right corner of the window. The following fields and buttons are used in the basic Commanding window. If you do not have access to a function, ...

Chapter 5 - Point Commander Point Commander Application Overview 37 Siemens Industry, Inc. 125-3584T – the Out of Service status indicator displays a check mark Status Indicators The lower right section of the Commanding window displays the following status indicators, which indicate status with a c...

Chapter 5 - Point Commander Point Commander Application Overview 38 Siemens Industry, Inc. 125-3584T  The Relinquish Default field displays the default value for relinquishing priority of the point.  The Present Value field shows the present value of the point at the current highest priority, and ...

Chapter 5 - Point Commander Using the Point Commander Application 39 Siemens Industry, Inc. 125-3584T Error Code Situation INVALID_DATATYPE The data type of the value provided is incorrect for the specified property. VALUE_OUT_OF_RANGE The value provided is outside the range of values that the prope...

Chapter 5 - Point Commander Using the Point Commander Application 40 Siemens Industry, Inc. 125-3584T Steps for Commanding Point Values 1. Access the Commanding window through the Devices/Points bar in the navigation pane on the left side of the screen. 2. Drill down to the desired point. 3. Double-...

Chapter 5 - Point Commander Using the Point Commander Application 41 Siemens Industry, Inc. 125-3584T 2. Drill down to the desired point. 3. Double-click the point name (or single click the command icon to the right of the point name) to open the basic (default) Commanding window. 4. In the Command ...

Chapter 6 - Graphics View Chapter Overview 43 Siemens Industry, Inc. 125-3584T Chapter 6 - Graphics View Chapter Overview Chapter 6 discusses the following topics:  Graphics View Overview – User Interface Description for the Graphics View – Tips for Using the Graphics View  Using the Graphics View...

Chapter 6 - Graphics View Using the Graphics View 44 Siemens Industry, Inc. 125-3584T Graphics File Types There are two types of graphics files.  A standard graphic is one where any Point Values shown on the graphic comes from a specific device and a specific object.  A Device Template Graphic is ...

Chapter 7 - Point Log Report Chapter Overview 46 Siemens Industry, Inc. 125-3584T Chapter 7 - Point Log Report Chapter Overview Chapter 7 discusses the following topics:  Point Log Report Application Overview – User Interface Description for the Point Log Report Application  Point Log Report Appli...

Chapter 7 - Point Log Report Using the Point Log Report Application 47 Siemens Industry, Inc. 125-3584T  The Name field allows you to search on the point name, using wildcard characters if necessary.  The Type drop-down allows you to choose the type of point on which to run the Point Log Report. ...

Chapter 8 - Trend View Chapter Overview 49 Siemens Industry, Inc. 125-3584T Chapter 8 - Trend View Chapter Overview Chapter 8 discusses the following topics:  Trend View Overview  Trend View Step-by-Step Instructions – Viewing Trend Data of a Single Trended Point – Viewing Trend Data of Multiple T...

Chapter 8 - Trend View Using the Trend View 51 Siemens Industry, Inc. 125-3584T You can navigate to other applications while the system is generating a Trend graph. To cancel a Trend graph, start a new Trend graph, close the trend viewing tab, or log off Field Panel Web Server. For more information,...

Chapter 8 - Trend View Using the Trend View 52 Siemens Industry, Inc. 125-3584T Printing a Trend Graph Do not use the browser print feature for printing Field Panel Web Server reports or graphs. Once the Trend graph is generated, click the Print button in the upper right corner of the right pane. Th...

Chapter 8 - Trend View Using the Trend View 53 Siemens Industry, Inc. 125-3584T Customizing a Trend Graph Trend graphs can be customized within Field Panel Web Server. Customization options include:  Vertical access values  Dynamic display versus static display  Dynamic display intervals  Line c...

Chapter 8 - Trend View Using the Trend View 54 Siemens Industry, Inc. 125-3584T Otherwise, during dynamic trending, when the buffer is filled, the first data point will drop off to make space in the buffer. Because it takes more than one second for this action, the Trend graph will be unable to disp...

Chapter 9 - Schedule View Chapter Overview 55 Siemens Industry, Inc. 125-3584T Chapter 9 - Schedule View Chapter Overview Chapter 9 discusses the following topics:  Scheduler Application Overview – User Interface Description for the Scheduler Application – Tips for Using the Scheduler Application ...

Chapter 9 - Schedule View Using the Scheduler Application 56 Siemens Industry, Inc. 125-3584T  The Objects section of the Schedule viewing window displays the objects associated with the schedule being viewed.  The left and right arrows at the top of the Schedule viewing window allow you to view t...

Chapter 9 - Schedule View Using the Scheduler Application 57 Siemens Industry, Inc. 125-3584T 1. Select the Scheduling bar from the navigation pane on the left side of the Field Panel Web Server screen.  All available panels will display. 2. Select the desired panel and schedule object by clicking ...

Chapter 10 - Create/Edit Common Editor Fields and Buttons 58 Siemens Industry, Inc. 125-3584T Chapter 10 - Create/Edit Common Editor Fields and Buttons Many of the editors have common fields and buttons. Some fields represent common properties of BACnet objects including Object Identifier, Object Na...

Chapter 10 - Create/Edit Common Editor Fields and Buttons 59 Siemens Industry, Inc. 125-3584T The Object Identifier field in the Web Server user interface shows the two components separated by a comma. The following Object Identifier represents a Binary Value object, instance 6: The Object Identifie...

Chapter 10 - Create/Edit Trend 60 Siemens Industry, Inc. 125-3584T Manually entering the Object Reference is required if the reference object is located in a non-FPWeb-enabled panel or a non-FPWeb-enabled panel’s associated FLN device. Common Editor Buttons and Functions Each editor is set up simila...

Chapter 10 - Create/Edit Trend 61 Siemens Industry, Inc. 125-3584T User Interface Description for the Trend Editor Application The Trend Editor Application can be accessed by clicking the Trend icon in the Create/Edit bar in the navigation pane on the left side of the screen. For information about o...

Chapter 10 - Create/Edit Trend 65 Siemens Industry, Inc. 125-3584T For information about off-node trending, see the Off-Node Trending section. Modifying a Trend Object 1. Select the Trend icon from the Create/Edit bar.  The Trend Editor window will open. 2. Click “Select a Panel” at the top of the ...

Chapter 10 - Create/Edit Trend 66 Siemens Industry, Inc. 125-3584T Viewing a Trend Object 1. Select the Trend icon from the Create/Edit bar.  The Trend Editor window will open. 2. Click “Select a Panel” at the top of the left pane of the Trend Editor window to display available panels. 3. Select th...

Chapter 10 - Create/Edit Point 67 Siemens Industry, Inc. 125-3584T Deleting a Trend Object 1. Select the Trend icon from the Create/Edit bar.  The Trend Editor window will open. 2. Click “Select a Panel” at the top of the left pane of the Trend Editor window to display available panels. 3. Select t...

Chapter 10 - Create/Edit Point 68 Siemens Industry, Inc. 125-3584T – Tips for Using the Point Editor Application  Point Editor Application Step-by-Step Instructions – Creating a Point – Intrinsic Alarming – Modifying a Point – Viewing a Point – Deleting a Point – Alarm Reports Point Editor Applicat...

Chapter 10 - Create/Edit Point 69 Siemens Industry, Inc. 125-3584T  The Object Identifier field displays the point Object Identifier information. An Object Identifier consists of an object type and instance number. The object type is the BACnet standard object type enumeration value (see table abov...

Chapter 10 - Create/Edit Point 70 Siemens Industry, Inc. 125-3584T 5. Click Create.  The point information window will open, displaying a new point. 6. Enter the new point information. 7. Click Save.  The Save button becomes grayed out once the modifications are complete. Intrinsic Alarming Intrin...

Chapter 10 - Create/Edit Point 71 Siemens Industry, Inc. 125-3584T 3. Select the desired panel by clicking the panel name in the left pane of the Point Editor window. 4. Either select an existing point or create a new point by clicking the + button at the bottom left of the Point Editor window.  Th...

Chapter 10 - Create/Edit Point 72 Siemens Industry, Inc. 125-3584T Viewing a Point 1. Select the Point icon from the Create/Edit bar.  The Point Editor window will open. 2. Click Select a Panel at the top of the left pane of the Point Editor window to display available panels. 3. Select the desired...

Chapter 10 - Create/Edit Point 73 Siemens Industry, Inc. 125-3584T Deleting a Point 1. Select the Point icon from the Create/Edit bar.

Chapter 10 - Create/Edit Schedule/Command/Calendar 75 Siemens Industry, Inc. 125-3584T  Weekly schedule  Exception schedule  Schedule default values  List of objects / property reference  Write priority  Out of service status The user can also create Calendar Objects to be used with the Schedu...

Chapter 10 - Create/Edit Schedule/Command/Calendar 78 Siemens Industry, Inc. 125-3584T 3. Select the desired panel by clicking the panel name in the left pane of the Object Editor window. 4. Click the + button at the bottom left of the Object Editor window.  The Schedule Editor window displays a ne...

Chapter 10 - Create/Edit Schedule/Command/Calendar 79 Siemens Industry, Inc. 125-3584T 6. Double click the entries in the Value column to change the desired values. NOTE: To add a schedule to multiple days of the week, click the Add Multiple button. Creating a Schedule ExceptionNotReleased 1. From w...

Chapter 10 - Create/Edit Schedule/Command/Calendar 81 Siemens Industry, Inc. 125-3584T 2. Click the value under the Priority column to change the exception priority. The Exception priority is the priority in which exception schedules are executed. If there are more than one exception schedules for t...

Chapter 10 - Create/Edit Schedule/Command/Calendar 82 Siemens Industry, Inc. 125-3584T  Click the – sign at the bottom left of the window to delete a Command Object from the Schedule Object. Modifying a Schedule ObjectNotReleased 1. Click the Schedule icon from the Create/Edit bar.  The Object Edi...

Chapter 10 - Create/Edit Schedule/Command/Calendar 83 Siemens Industry, Inc. 125-3584T Viewing a Schedule ObjectNotReleased 1. Click the Schedule icon from the Create/Edit bar.  The Object Editor window displays. 2. Click Select a Panel at the top of the left pane of the Object Editor window to dis...

Chapter 10 - Create/Edit Schedule/Command/Calendar 84 Siemens Industry, Inc. 125-3584T Deleting a Schedule ObjectNotReleased 1. Click the Schedule icon from the Create/Edit bar.  The Object Editor window displays. 2. Click Select a Panel at the top of the left pane of the Object Editor window to di...

Chapter 10 - Create/Edit Schedule/Command/Calendar 85 Siemens Industry, Inc. 125-3584T Creating a Command ObjectNotReleased 1. Click the Command icon from the Create/Edit bar (hover over the Schedule icon to view it).  The Object Editor window displays. 2. Click Select a Panel at the top of the lef...

Chapter 10 - Create/Edit Schedule/Command/Calendar 86 Siemens Industry, Inc. 125-3584T Modifying a Command ObjectNotReleased 1. Click the Command icon from the Create/Edit bar (hover over the Schedule icon to view it).  The Object Editor window displays. 2. Click Select a Panel at the top of the le...

Chapter 10 - Create/Edit Schedule/Command/Calendar 87 Siemens Industry, Inc. 125-3584T Viewing a Command ObjectNotReleased 1. Click the Command icon from the Create/Edit bar (hover over the Schedule icon to view it).  The Object Editor window displays. 2. Click Select a Panel at the top of the left...

Chapter 10 - Create/Edit Schedule/Command/Calendar 88 Siemens Industry, Inc. 125-3584T Deleting a Command ObjectNotReleased 1. Click the Command icon from the Create/Edit bar (hover over the Schedule icon to view it).  The Object Editor window displays. 2. Click Select a Panel at the top of the lef...

Chapter 10 - Create/Edit Schedule/Command/Calendar 90 Siemens Industry, Inc. 125-3584T Modifying a Calendar ObjectNotReleased 1. Click the Calendar icon from the Create/Edit bar (hover over the Schedule icon to view it).  The Object Editor window displays. 2. Click Select a Panel at the top of the ...

Chapter 10 - Create/Edit Schedule/Command/Calendar 91 Siemens Industry, Inc. 125-3584T Viewing a Calendar ObjectNotReleased 1. Click the Calendar icon from the Create/Edit bar (hover over the Schedule icon to view it).  The Object Editor window displays. 2. Click Select a Panel at the top of the le...

Chapter 10 - Create/Edit Schedule/Command/Calendar 92 Siemens Industry, Inc. 125-3584T Deleting a Calendar ObjectNotReleased 1. Click the Calendar icon from the Create/Edit bar (hover over the Schedule icon to view it).  The Object Editor window displays. 2. Click Select a Panel at the top of the l...

Chapter 10 - Create/Edit Event Enrollment 93 Siemens Industry, Inc. 125-3584T Event Enrollment For information about intrinsic alarming, see the Point Editor section of this document. To receive alarms from BTECs and PPMs, Event Enrollment must be used. Section Overview This section discusses the fo...

Chapter 10 - Create/Edit Event Enrollment 95 Siemens Industry, Inc. 125-3584T  The Time Delay field allows you to specify the time (in seconds) that the object must be in or out of alarm or fault for a notification to be sent.  The Notification Class dropdown allows you to choose the notification ...

Chapter 10 - Create/Edit Event Enrollment 96 Siemens Industry, Inc. 125-3584T  The Event Editor window displays a new Event Enrollment object. 5. Enter the new Event Enrollment object information. 6. Click Save.  The Save button becomes grayed out once the modifications are complete. Modifying an ...

Chapter 10 - Create/Edit Event Enrollment 97 Siemens Industry, Inc. 125-3584T Viewing an Event Enrollment Object 1. Click the Event Enrollment icon from the Create/Edit bar.  The Event Enrollment Editor window displays. 2. Click Select a Panel at the top of the left pane of the Event Enrollment Edi...

Chapter 10 - Create/Edit Event Enrollment 98 Siemens Industry, Inc. 125-3584T Deleting an Event Enrollment Object 1. Click the Event Enrollment icon from the Create/Edit bar.  The Event Editor window displays. 2. Click Select a Panel at the top of the left pane of the Event Enrollment Editor window...

Chapter 10 - Create/Edit Notification Class 99 Siemens Industry, Inc. 125-3584T Acknowledging the state of an object does not refresh the report. The report must be re-run by clicking the count button to see updated data. To run an Alarm report: 1. Click the Alarms button in the Status Bar.  An Ala...

Chapter 10 - Create/Edit Notification Class 102 Siemens Industry, Inc. 125-3584T  To change the order of the columns, click and hold the column and move it to the desired location within the table. Using the Notification Class Editor If a Remote Destination is added to a Notification Class object, ...

Chapter 10 - Create/Edit Notification Class 103 Siemens Industry, Inc. 125-3584T - In the Transitions cell, choose the desired transition options. 7. To add a remote recipient, click the + button at the bottom left of the Remote Destinations table. - In the Remote Recipient cell, choose the recipien...

Chapter 10 - Create/Edit Notification Class 104 Siemens Industry, Inc. 125-3584T 2. Click Select a Panel at the top of the left pane of the Notification ClassEditor window to display available panels. 3. Select the desired panel and the desired Notification Class object by clicking the panel name an...

Chapter 10 - Create/Edit Remote Notification 105 Siemens Industry, Inc. 125-3584T Deleting a Notification Class Object 1. Click the Notification Class icon from the Create/Edit bar.  The Notification Class Editor window displays. 2. Click Select a Panel at the top of the left pane of the Notificati...

Chapter 10 - Create/Edit Remote Notification 106 Siemens Industry, Inc. 125-3584T The Remote Recipient List Editor allows you to add, modify, and delete Remote Recipient addresses, which can then be added to Notification Class objects as remote destinations. See the Remote Recipient List section for...

Chapter 10 - Create/Edit Remote Notification 108 Siemens Industry, Inc. 125-3584T checkbox allows the user to enable or disable authentication by checking or unchecking the box.  The Username field displays the user name used for authentication by the SMTP server. The user can edit this field if SM...

Chapter 10 - Create/Edit Remote Notification 109 Siemens Industry, Inc. 125-3584T Section Overview This section discusses the following topics:  Remote Recipient List Editor Overview – Using the Remote Recipient List Editor – Creating a Remote Recipient – Modifying a Remote Recipient – Deleting a R...

Chapter 10 - Create/Edit Remote Notification 110 Siemens Industry, Inc. 125-3584T The width and order of the table columns can be changed in the application pane, but the changes remain only for the current session. Once you leave the editor, the column configuration reverts to the default settings....

Chapter 10 - Create/Edit Remote Notification 111 Siemens Industry, Inc. 125-3584T The Alias can have up to 30 characters. The field is not case sensitive. Do not use the following characters in the Alias cell: Asterisk: * Open or closed brackets: [ ] Quotation marks: " Question mark: ? 3. Edit t...

Chapter 10 - Create/Edit FLN 112 Siemens Industry, Inc. 125-3584T Replicating a Remote Recipient ListNotReleased The replicate feature allows you to copy the entire Remote Recipient List to all other online Web-enabled field panels on the local ALN. 1. While in the Remote Recipient List Editor, clic...

Chapter 10 - Create/Edit FLN 115 Siemens Industry, Inc. 125-3584T Modifying an FLN Device 1. Click the FLN icon from the Create/Edit bar.  The FLN Device Editor window displays. 2. Click Select a Panel at the top of the left pane of the FLN Device Editor window to display available panels. 3. Selec...

Chapter 10 - Create/Edit FLN 116 Siemens Industry, Inc. 125-3584T Viewing an FLN Device 1. Click the FLN icon from the Create/Edit bar.  The FLN Device Editor window displays. 2. Click Select a Panel at the top of the left pane of the FLN Device Editor window to display available panels. 3. Select ...

Chapter 10 - Create/Edit TEC Init 117 Siemens Industry, Inc. 125-3584T Deleting an FLN Device 1. Click the FLN icon from the Create/Edit bar.  The FLN Device Editor window displays. 2. Click Select a Panel at the top of the left pane of the FLN Device Editor window to display available panels. 3. S...

Chapter 10 - Create/Edit TEC Init 119 Siemens Industry, Inc. 125-3584T  The FLN Device Name dropdown allows you to select the desired FLN Device.  The Update Panel button allows you to update the panel with the initial values.  The Initialize TEC button allows you to initialize the selected TEC b...

Chapter 10 - Create/Edit PPCL 121 Siemens Industry, Inc. 125-3584T 4. Select the desired device from the FLN Device Name drop-down in the TEC Initial Values Editor window. 5. Initialize the TEC by clicking the Initialize TEC button. 6. Click Save.  The Save button will be grayed out once the modifi...

Chapter 10 - Create/Edit PPCL 122 Siemens Industry, Inc. 125-3584T The PPCL Editor allows you to create, modify, or delete a Powers Process Control Language (PPCL) program, as well as:  Modify line numbers  Enable or disable lines of code  Delete lines of code  Reset trace bits  Import and expo...

Chapter 10 - Create/Edit PPCL 124 Siemens Industry, Inc. 125-3584T  The Export button exports a highlighted section or the whole program (if no section is highlighted) as a text file to the client local hard drive or a network share accessible from the client computer.  The Print button allows you...

Chapter 10 - Create/Edit PPCL 125 Siemens Industry, Inc. 125-3584T 2. Use the arrows to select the first and last lines to enable or disable, and click the Enable or Disable button in the Enable Lines or Disable Lines window. The fields default to asterisks (*), which can be used for wildcarding. 3....

Chapter 10 - Create/Edit PPCL 126 Siemens Industry, Inc. 125-3584T Viewing a PPCL Program 1. Click the PPCL icon from the Create/Edit bar.  The PPCL Editor window displays. 2. Click Select a Panel at the top of the left pane of the PPCL Editor window to display available panels. 3. Select the desir...

Chapter 10 - Create/Edit Users 127 Siemens Industry, Inc. 125-3584T Deleting a PPCL Program 1. Click the PPCL icon from the Create/Edit bar.  The PPCL Editor window displays. 2. Click Select a Panel at the top of the left pane of the PPCL Editor window to display available panels. 3. Select the des...

Chapter 10 - Create/Edit Users 128 Siemens Industry, Inc. 125-3584T User Info Tab  The Account Name field allows you to name the account being created, using up to 40 characters. This field cannot be edited in an existing User Account.  The User Initials field allows you to create a unique user na...

Chapter 10 - Create/Edit Users 129 Siemens Industry, Inc. 125-3584T – HH:MM:SSAP (02:14:14pm) – HH:MMAP (02:14am) – MILITARY (1414) – MILITARY:SS (1414:14) NOTE: The Time Format field is only applied at the HMI, and not at the Web Server User Interface.  The Date Format field allows you to select f...

Chapter 10 - Create/Edit Users 131 Siemens Industry, Inc. 125-3584T  Diagnostic – Allows you to define user rights for working with diagnostic options. Diagnostic privileges require System privileges. If no System privileges are enabled then this option will be grayed out.  User – Allows you to de...

Chapter 10 - Create/Edit Users 132 Siemens Industry, Inc. 125-3584T 5. Choose the user access levels for each application or feature. 6. Click Save.  The Save button will be grayed out once the modifications are complete. Modifying a User Account 1. Click the Users icon from the Create/Edit bar.  ...

Chapter 10 - Create/Edit Users 133 Siemens Industry, Inc. 125-3584T Viewing a User Account 1. Click the Users icon from the Create/Edit bar.  The User Account Editor window displays. 2. Select the desired User Account by clicking a name in the left pane.  The User Account information area displays...

Chapter 10 - Create/Edit Change User Password 134 Siemens Industry, Inc. 125-3584T Deleting a User Account 1. Click the Users icon from the Create/Edit bar.  The User Account Editor window displays. 2. Select the desired User Account by clicking a name in the left pane. 3. Click the - button at the...

Chapter 10 - Create/Edit Change Panel Time 135 Siemens Industry, Inc. 125-3584T User Account Passwords Using Double Byte Character Sets Double byte characters cannot be directly entered in the Password field at the Web Server User Interface or in FINlite. At the Web Server User Interface there are p...

Chapter 11 - FINlite Graphics Tool Chapter Overview 137 Siemens Industry, Inc. 125-3584T Chapter 11 - FINlite Graphics Tool Chapter Overview Chapter 11 discusses the following topics:  FINlite Graphics Tool Overview – User Interface Description for the FINlite Graphics Tool – Tips for Using the FIN...

Chapter 11 - FINlite Graphics Tool FINlite Graphics Tool Overview 138 Siemens Industry, Inc. 125-3584T  Publish graphics to the panel(s)  Open a pre-constructed graphics file from the local file system In the Siemens FINlite graphics utility program and in the Web Server user interface, limit the ...

Chapter 11 - FINlite Graphics Tool FINlite Graphics Tool Overview 139 Siemens Industry, Inc. 125-3584T The drop-down menus at the top of the Siemens FINlite Application and the navigation pane bars on the left side of the Siemens FINlite Application allow the user to work with the graphics files in ...

Chapter 11 - FINlite Graphics Tool FINlite Graphics Tool Overview 140 Siemens Industry, Inc. 125-3584T The Edit menu allows you to access the Edit commands:  Undo allows you to reverse the last action.  Redo allows you to reverse the last Undo action.  Cut removes the image from the file and puts...

Chapter 11 - FINlite Graphics Tool FINlite Graphics Tool Overview 141 Siemens Industry, Inc. 125-3584T The Language menu allows you to change the language used in the FINlite application. Question Mark Icon The Question Mark icon opens the User Guide and product information.  User Guide opens the p...

Chapter 11 - FINlite Graphics Tool FINlite Graphics Tool Overview 142 Siemens Industry, Inc. 125-3584T Components Bar The Components bar displays the available components which can be dragged and dropped to the canvas and customized. Supplied component images are intended for use with binary points....

Chapter 11 - FINlite Graphics Tool FINlite Graphics Tool Overview 143 Siemens Industry, Inc. 125-3584T  The Delete Layer button deletes the highlighted layer. Properties Bar Clicking a component in the canvas on the right side of the application, and opening the Properties bar in the left navigatio...

Chapter 11 - FINlite Graphics Tool FINlite Graphics Tool Overview 144 Siemens Industry, Inc. 125-3584T Animation Editor The Animation Editor allows you to customize the animation of a graphics component. See the Editing the Graphics Animation section for more information. File-System & User Libr...

Chapter 11 - FINlite Graphics Tool FINlite Graphics Tool Overview 145 Siemens Industry, Inc. 125-3584T The canvas is the graphics workspace on the right side of the FINlite application window. The top left tab displays the name of the graphics file. The Maximize button allows you to maximize the wor...

Chapter 11 - FINlite Graphics Tool Using the FINlite Graphics Tool 146 Siemens Industry, Inc. 125-3584T  Once published to a panel, graphics files can be modified using the same computer used to create them, or they must be copied manually from the field panel to a computer running the Siemens FINl...

Chapter 11 - FINlite Graphics Tool Using the FINlite Graphics Tool 147 Siemens Industry, Inc. 125-3584T 1. To keep the Choice window from displaying upon start-up, check the Don’t show this again check box. 2. Click the Open button to open an existing Graphics file from the local file system. NOTE: ...

Chapter 11 - FINlite Graphics Tool Using the FINlite Graphics Tool 151 Siemens Industry, Inc. 125-3584T The features of a Button component can be modified using the Properties bar: name, label text, on-click action, size, position, visibility, locked status, corner shape, font style/color/size, and ...

Chapter 11 - FINlite Graphics Tool Using the FINlite Graphics Tool 152 Siemens Industry, Inc. 125-3584T 5. Choose a section in the values line (Boolean component types will have only “True” and “False”) by clicking in between the triangles. 6. Use the Use Frame drop-down to choose an image to connec...

Chapter 11 - FINlite Graphics Tool Using the FINlite Graphics Tool 153 Siemens Industry, Inc. 125-3584T 2. Click Publish. 3. The graphics files on Drive A can be backed up to the Internal Flash Drive (IFD) using the HMI. Default Graphics To set a default graphic for the panel: 1. When publishing the...

Chapter 11 - FINlite Graphics Tool Using the FINlite Graphics Tool 155 Siemens Industry, Inc. 125-3584T In the Field Panel Web Server User Interface To apply the relativized graphics file to an FLN device: 1. Open the relativized graphics file. Device Template graphics (relativized graphics files) a...

Chapter 11 - FINlite Graphics Tool Using the FINlite Graphics Tool 156 Siemens Industry, Inc. 125-3584T >ipSettings, Bbmd, Telnet, Webserver, Quit? w >Display, Modify, Uiupgrade, Graphicsbackup, Quit? g >Are you sure : y DONE Deleting Graphics Files Graphics files consist of .fnl files and ...

Chapter 11 - FINlite Graphics Tool Using the FINlite Graphics Tool 158 Siemens Industry, Inc. 125-3584T Drive name : ifd List_drives, Set_drive, listDirectory, Change_dir, File_ops, Remove_dir, Quit? f Copy_file, Rename_file, Move_file, Delete_file, Quit? d File name : wsroot\graphics\purple.fnl Are...

Chapter 12 - Field Panel Features for Field Panel Web Server Field Panel File System Operations 160 Siemens Industry, Inc. 125-3584T Chapter 12 - Field Panel Features for Field Panel Web Server Field Panel File System Operations Basic File System Operation Commands Use these procedures to set drives...

Chapter 12 - Field Panel Features for Field Panel Web Server Field Panel File System Operations 161 Siemens Industry, Inc. 125-3584T User: <high> <High default user account> >Point, Application, Time, Message, Cancel, System, passWord, Bye? s >Diagnostics, Users, dSt, Bacnet, Error...

Chapter 12 - Field Panel Features for Field Panel Web Server Field Panel File System Operations 162 Siemens Industry, Inc. 125-3584T List Files in a Directory HMI S, H, F, F, D, (System, Hardware, Fieldpanels, Filesys, listDirectory) Example 10:13:04 07/30/2010 FRI Logged on successfully Field panel...

Chapter 12 - Field Panel Features for Field Panel Web Server Field Panel File System Operations 163 Siemens Industry, Inc. 125-3584T 10:13:04 07/30/2010 FRI Logged on successfully Field panel <40091> User: <high> <High default user account> >Point, Application, Time, Message, Ca...

Chapter 12 - Field Panel Features for Field Panel Web Server Field Panel File System Operations 164 Siemens Industry, Inc. 125-3584T >Copy_file, Rename_file, Move_file, Delete_file, Quit? d >File name: wsroot\fpweb.swf------------------------------------ --- >Are you sure: y Deleting wsroot...

Chapter 12 - Field Panel Features for Field Panel Web Server Field Panel File System Operations 165 Siemens Industry, Inc. 125-3584T Use this procedure to copy a file from the current directory to another directory or drive (root or subfolder), via the HMI. This procedure does not delete the file fr...

Chapter 12 - Field Panel Features for Field Panel Web Server Field Panel File System Operations 166 Siemens Industry, Inc. 125-3584T >List_drives, Set_drive, listDirectory, Change_dir, File_ops, Quit? f >Copy_file, Rename_file, Move_file, Delete_file, Remove_dir, Quit? c >Source File Name: ...

Chapter 12 - Field Panel Features for Field Panel Web Server Field Panel File System Operations 167 Siemens Industry, Inc. 125-3584T Path: A:\WSROOT\ >List_drives, Set_drive, listDirectory, Change_dir, File_ops, Remove_dir, Quit? c >File Directory : graphics------------------------ Path: A:\WS...

Chapter 12 - Field Panel Features for Field Panel Web Server Backing up and Restoring Databases 168 Siemens Industry, Inc. 125-3584T >Fieldpanels, Ethernet, nodeNametable, Disks, Reportprinter, Licensemanager, Quit? f >Log, Display, Add, dElete, Modify, Config, Filesys, Quit? f >List_drives...

Chapter 12 - Field Panel Features for Field Panel Web Server Backing up and Restoring Databases 169 Siemens Industry, Inc. 125-3584T When Web Server is enabled on a panel, Auto Save and Auto Restore are enabled as the default. You can manually disable them using the HMI. If you are using TALON View ...

Chapter 12 - Field Panel Features for Field Panel Web Server Available Memory Diagnostic Point 170 Siemens Industry, Inc. 125-3584T Any new Web Server panel must be made ready before Auto Save will work. Fifteen minutes after the panel is made ready, the database will be automatically saved. Manuall...

Chapter 13 - Troubleshooting Available Memory Diagnostic Point 171 Siemens Industry, Inc. 125-3584T Chapter 13 - Troubleshooting General Troubleshooting Tips When first experiencing issues, try the following general tips:  Refresh the panel  Log off, close the browser, log on  Clear the UI cache ...

Chapter 13 - Troubleshooting Log On Error Messages 172 Siemens Industry, Inc. 125-3584T  Move the slider back to the right to allow storage. 1. Click Close. 2. After clearing the UI cache with the steps above, it may also help to log off, close the browser, and log on. Clear the FINlite Cache Close...

Chapter 13 - Troubleshooting Install, Upgrade, and Connection Errors 173 Siemens Industry, Inc. 125-3584T Issue: The user name and password entered are valid for a user account, but the password has expired. Solution: Contact your system administrator to reset your password. Account is Locked Issue:...

Chapter 13 - Troubleshooting Install, Upgrade, and Connection Errors 174 Siemens Industry, Inc. 125-3584T Field Panel Web Server User Interface Upgrade Fails Issue: A Field Panel Web Server User Interface upgrade fails. Solution: A User Interface upgrade requires approximately 2.7 MB. Before perform...

Chapter 13 - Troubleshooting Graphics Issues 175 Siemens Industry, Inc. 125-3584T panels lose communication, an error message will display for each panel, indicating which panel has lost communication. If an FPWeb-enabled panel loses communication, the Device Failures Count will increase, and the Pa...

Chapter 13 - Troubleshooting Other Issues 176 Siemens Industry, Inc. 125-3584T Other Issues Panel Not Saving Automatically Issue: The panel is not Saving Automatically, even though Auto Save and Auto Restore are enabled. Solution: The panel must be made ready for Auto Save to function properly. Perf...