Siemens T1000 - User Manual
Siemens T1000 – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Environmental conditions; fl
- Page 3 – Closed Loop Control
- Page 5 – System Overview; Predictive control; State feedback controllers; Process
- Page 6 – SoftTurbo
- Page 7 – SoftFS - Fail Safe System; PROFIBUS; PROFIBUS Process Field Bus
- Page 8 – System Bus; Interfaces; GUES
- Page 9 – DAD; Field Interface Module
- Page 10 – Non redundant system; Redundancy; The redundancy is explained by the following
- Page 11 – Fully redundant; I/O redundancy class is explained as follows:; The SoftOM redundancy is; Non redundant
- Page 13 – Engineering comfort
- Page 14 – SPP
1/13
SPPA-T1000
System Overview
Siemens CI 760 : 2006/2007
•
FIM
Field Interface Module
•
DAD
Debugging and Diagnostic System
SoftAS has a Central Controller (CC) architecture with
remote and/or central I/Os. It has very fast response
times, achieved through the ultra high speed processing
and data handling capabilities. The CC implements all
functions like open loop control, closed loop control
and measurements. It supports fully the automation
hierarchy (individual control level, group control level,
unit control level) of the control structure in a plant.
All the process control algorithms implemented in
the system conform to the concepts laid down for
distributed control systems.
SPPA-T1000
: Basic Con
fi
guration
Overview
SPPA-T1000 is an advanced Distributed Control
System enriched with the latest concepts and
features to ful
fi
ll the growing requirements of the
market. It has been speci
fi
cally designed for control
of all types and sizes of power plants. It is based
upon the proven features of Teleperm XP innovated
with latest technological enhancements to offer
open, universal and web-enabled platforms,
excellent availability, high operational comforts
and an extremely easy engineering process.
SPPA-T1000 comprises of the following major
constituents:
•
SoftAS
Automation System
•
SoftOM
Operation & Monitoring System
•
SoftTurbo Turbine Control System
•
SoftFS
TMR (Triple Modular Redundant)
Control System for high safety and
high availability applications
•
SoftBuzz
Bus System & Interfaces
•
GUES
+
Graphical User Engineering
System
Operation
&
Monitoring
HMI
HMI
ENG.
HMI
HMI
Central / Remote I/O / Intelligent
fi
eld devices
ENG.
CC
Unit Control
Group Control
Sub-group / Individual control
Measurement system
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2/13 SPPA-T1000 System Overview Siemens CI 760 : 2006/2007 Input/ Output modules mounted in I/O stations serve as the interface to the process. These I/O stations communicate with the CC via PROFIBUS and other fi eld bus systems. Thus SoftAS acquires analog values and statuses from the process via t...
3/13 SPPA-T1000 System Overview Siemens CI 760 : 2006/2007 It is recommended to observe in addition the following rules and guidelines in order to provide for a low-inductive functional compensation and a suf fi cient internal and external lightning protection:IEC 1024, Section 1 Internal and extern...
5/13 SPPA-T1000 System Overview Siemens CI 760 : 2006/2007 Predictive control Interdependencies in the process & disturbances in variables are integrated into fuzzy control design.Fuzzy logic controls are primarily used for the non-linear processes, which cannot be exactly represented in mathema...
