Siemens SK76M530GB - Troubleshooting Guide
Siemens SK76M530GB – Troubleshooting Guide, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Issue 2; Contents; Main sign faults (identification and rectification); Non-illumination of an LED segment during sign operation.
- Page 5 – Safety Warning; Health and Safety at Work; Safety of Installation and Maintenance Personnel; Scope
- Page 6 – Yellow
- Page 7 – The sign is blank and does not illuminate.; and
- Page 8 – LSCU 7-segment display Hardware Fault Codes; Summary
- Page 9 – red LED’s
- Page 12 – Light Sensor optical lens
- Page 14 – Faulty detection device.
- Page 15 – LSCU 7-segment display Communication Fault Codes; Gemini CPU; Conflict between configuration file and Gemini setup.
- Page 16 – configuration; Test and replace the
- Page 17 – Communications; Fault to be reported back to STC Engineering in Poole.
- Page 18 – Incorrect wiring of the RS485
- Page 19 – LSCU 7-segment display Configuration Fault Codes
- Page 30 – Tools; Download link
- Page 31 – Contacts within Engineering
- Page 33 – Appendix 1; Green LED
- Page 36 – Figure 4. Mains distribution within the sign
- Page 37 – Figure 5. Light Sensor Connections and Input terminals
- Page 38 – Figure 6. Gemini option items, and 48 volt LED supply PSU
- Page 39 – Figure 7. Download link & Test Mode configuration plug; Download Link; Plug side 1; How to configure a blank Configuration Plug for Test Mode; Issue
Title: Graphos Fault Finding and Troubleshooting Guide
Part Number 667/HE/31200/000
Issue 2
Page 1 of 39
Graphos Fault Finding and
Troubleshooting Guide
Document Authorisation
Role Name
Function
Signed
Prepared
by:
D. Martin
Engineering Manager
Reviewed
by:
R. Martin
Project Support Manager
Authorised
by:
C. Whipps
Technical Support Manager
Document record
Issue Number
Date
Change Reference
A 31/08/05
B 15/08/05
PNB
1 09/12/05
DAM
2
04/09/0
7
FEF – RFC TS004029, Section 5.3 modified
This document is electronically held.
This is an unpublished work, the copyright of which vests in Siemens Plc. All rights reserved.
The information contained herein is the property of Siemens Plc. and is supplied without liability for
errors or omissions. No part may be reproduced or used except as authorised by contract or other
written permission. The copyright and the foregoing restriction on reproduction and use extend to all
media in which the information may be embodied.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Title: Graphos Fault Finding and Troubleshooting Guide Part Number 667/HE/31200/000 Issue 2 Page 2 of 39 Contents 1 Safety Warning ..............................................................................................................5 2 Scope ....................................................
Title: Graphos Fault Finding and Troubleshooting Guide Part Number 667/HE/31200/000 Issue 2 Page 5 of 39 1 Safety Warning Health and Safety at Work Safety of Installation and Maintenance Personnel In the interests of health and safety, when installing, using or servicing this type of equipment the f...
Title: Graphos Fault Finding and Troubleshooting Guide Part Number 667/HE/31200/000 Issue 2 Page 6 of 39 4 Main sign faults (identification and rectification) 4.1 Non-illumination of an LED segment during sign operation. 4.1.1 Symptom: An LED segment does not illuminate during normal sign operation....
