Siemens AG AT18 - User Manual
Siemens AG AT18 – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Overview of operating elements; X1: Auxiliary module flat cable connection
- Page 3 – Safety instructions; WARNING; qualified personnel; Mechanical installation and configuration; “CLOSE”
- Page 4 – CAREFUL; “OPEN”
- Page 5 – NOTICE
- Page 6 – Parameter setting with terminal module or user terminal; Accept key, jump to next menu below; ESC
- Page 8 – Ý ç i n d e k i l e r; Contact partner
Condensed Operating Manual for Door Control Unit AT8
Rev. 09, Issue Date 8/2007
www.siemens.de/edm
SIDOOR
Condensed Operating Manual AT18
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Condensed Operating Manual for Door Control Unit AT8 1 Overview of operating elements Substructure group AT8: X1: Auxiliary module flat cable connection X3: Mains current transformer connection X4: Current output 4V / 0.4A X5: Emergency power module input signal X6: Input signals connection - Light ...
3 Condensed Operating Manual for Door Control Unit AT8 2 Safety instructions WARNING Only qualified personnel should work on or be in the vicinity of this equipment. This staff must be thoroughly familiarized with all warnings and maintenance procedures according to the operating manual. 3 Mechanica...
4 Condensed Operating Manual for Door Control Unit AT8 . Connect the light barrier to X6 (see illustration or lid imprint). Insofar as the light barrier input is not used, X6 must be wired to X4 according to the lines on the connection layout. 3. Plug in clip plugs X6 and X4. CAREFUL The control is ...
