Siemens AG AT18 - Manuals

Condensed Operating Manual for Door Control Unit AT8 1 Overview of operating elements Substructure group AT8: X1: Auxiliary module flat cable connection X3: Mains current transformer connection X4: Current output 4V / 0.4A X5: Emergency power module input signal X6: Input signals connection - Light ...

3 Condensed Operating Manual for Door Control Unit AT8 2 Safety instructions WARNING Only qualified personnel should work on or be in the vicinity of this equipment. This staff must be thoroughly familiarized with all warnings and maintenance procedures according to the operating manual. 3 Mechanica...

4 Condensed Operating Manual for Door Control Unit AT8 . Connect the light barrier to X6 (see illustration or lid imprint). Insofar as the light barrier input is not used, X6 must be wired to X4 according to the lines on the connection layout. 3. Plug in clip plugs X6 and X4. CAREFUL The control is ...