Schneider Electric 170AMM11030 - Manual

Schneider Electric 170AMM11030

Schneider Electric 170AMM11030 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
Page: / 22

Table of Contents:

  • Page 2 – Safety Information; DANGER; in injury or equipment damage.
  • Page 3 – This document contains the following topics:; Front Panel Components; Overview; The illustration below shows the front panel of the I/O base.; Topic
  • Page 4 – LED Illustration; The illustration below shows the LEDs.
  • Page 5 – Specifications
  • Page 6 – Analog Inputs; The following table contains specifications for analog inputs.
  • Page 7 – Analog Outputs; The following table contains specifications for analog outputs.; Discrete Inputs
  • Page 8 – Discrete Outputs; CAUTION
  • Page 9 – The following table outlines physical dimensions for the I/O base.; Internal Pin Connections; AGND and DGND are connected at a single point inside the module.
  • Page 10 – Field Wiring Guidelines
  • Page 11 – Wiring Diagrams; discrete input and output
  • Page 13 – Register for Outputs; ATI communication is lost.; Word
  • Page 14 – Bit Value
  • Page 15 – x Registers; Not Used; the count range maximum value will be used as the shutdown value.; Data Type
  • Page 16 – Range; Output Operating Range; Register for Inputs; The input register is arranged as follows.; Output Voltage
  • Page 19 – Analog Map
  • Page 20 – Discrete I/O Points and IEC Compliant Data Mapping
  • Page 21 – Input and Output Ranges
Loading the manual

3

1005009 01

170AMM11030 Analog/Digital
Momentum I/O Base User Guide

Version 1.0

3

1005

009 01

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Safety Information; DANGER; in injury or equipment damage.

2 31005009 00 November 2003 Safety Information NOTICE Read these instructions carefully, and look at the equipment to become familiar with the device before trying to install, operate, or maintain it. The following special messages may appear throughout this documentation or on the equipment to warn...

Page 3 - This document contains the following topics:; Front Panel Components; Overview; The illustration below shows the front panel of the I/O base.; Topic

31005009 01 November 2003 3 170AMM11030 Analog/Digital Momentum I/O Base Overview This document contains the following topics: Front Panel Components Overview This section contains an illustration of the front panel of the 170AMM11030 I/O base and a description of the LEDs. Front Panel Illustration ...

Page 4 - LED Illustration; The illustration below shows the LEDs.

4 31005009 01 November 2003 Components of the I/O Module: LED Illustration The illustration below shows the LEDs. LED Descriptions The following table describes the LEDs. Label Description 1 Internal interface (ATI) connector 2 Locking and ground contact for the adapter 3 LED status display 4 Protec...

Other Schneider Electric Models

All Schneider Electric Other