Samsung SC9580 - User Manual

Page 13 - Operating Instructions; VACUUM CLEANER

Operating Instructions VACUUM CLEANER ❈ Before operating this unit, please read the instructions carefully. ❈ Indoor use only. Register your product at www.samsung.com/global/register EN

Page 14 - IMPORTANT SAFEGUARDS

EN-1 IMPORTANT SAFEGUARDS 1. Read all instructions carefully. Before switching on, make sure that the voltage of your electricity supply is the same as that indicated on the rating plate on the bottom of the cleaner. 2. WARNING : Do not use the vacuum cleaner when rug or floor is wet. Do not use to ...

Page 15 - ASSEMBLING THE CLEANER

EN-2 1 ASSEMBLING THE CLEANER Features may vary according to model. Refer to 5,6 page. ▼ For storage, park the floor nozzle. CAUTION Please do not press the button of dust bin handle when carrying machine. OPTION

Page 16 - OPERATING THE CLEANER

EN-3 2 OPERATING THE CLEANER 2-1. POWER CORD NOTE When removing the plug from the electrical outlet, grasp the plug, not the cord. Please make sure your cable is fully extended before use. 2-2. POWER CONTROL (INFRARED CONTROL) HANDLE CONTROL 1. Vacuum cleaner ON/OFF ( ) Press the ON/OFF button to op...

Page 17 - -3. HOW TO USE AND MAINTAIN THE ACCESSORIES; Features may vary according to model.

EN-4 ACCESSORY Push the accessory on to the end of the hose handle. Pull out and turn the dust- ing brush for cleaning deli- cate areas. To use the upholstery tool, push the accessory on to the end of the hose handle in the opposite direction. ELBOW EXTENDING TUBE (OPTION) 1. Connect the elbow exten...

Page 19 - EMPTYING THE DUST BIN

EN-6 Once dust reaches the DUST FULL mark, empty the dust bin Take the dust bin out by pressing the button. Throw the dust away in the bin. After empting the DUST BIN, remove the obstacles like hair, fur on the cap of the DUST BIN. Before use, push the dust bin into the main body of the vacuum clean...

Page 20 - CLEANING THE DUST PACK; -3. CHECKING THE FILTER CHECK INDICATOR LAMP

EN-7 4 CLEANING THE DUST PACK 4-1. WHEN TO CLEAN THE DUST PACK - Please, check the dust bin and dust pack if suction is noticeably reduced or the filter check indicator lamp turns on after empting the dust bin. The lamp will illuminate to signal when suction is reduced. If the light comes on, please...

Page 23 - - IF YOU HAVE A PROBLEM

PROBLEM CAUSE REMEDY 0 - IF YOU HAVE A PROBLEM Motor does not start. No power supply. Thermal cut-out. Check cable, plug and socket. Leave to cool. Suction force is gradually decreasing. Nozzle, suction hose or tube is blocked. Check for blockage and remove it. Cord does not rewind fully. Check that...