Samsung OH55F - User Manual

Table of contents 7 Specifications General 169 Preset Timing Modes 171 Appendix Responsibility for the Pay Service (Cost to Customers) 173 Not a product defect 173 A Product damage caused by customer's fault 173Others 173 Optimum Picture Quality and Afterimage Burn-in Prevention 174 Optimum Picture ...

8 Before Using the Product Chapter 01 Safety Precautions Warning A serious or fatal injury may result if instructions are not followed. Caution Personal injury or damage to properties may result if instructions are not followed. Activities marked by this symbol are prohibited. Instructions marked by...

9 Electricity and Safety Warning Do not use a damaged power cord or plug, or a loose power socket. • An electric shock or fire may result. Do not use multiple products with a single power socket. • Overheated power sockets may cause a fire. Do not touch the power plug with wet hands. Otherwise, an e...

10 Installation Warning DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES. • A fire may result. Have a technician install the wall-mount hanger. • Installation by an unqualified person can result in an injury. • Only use approve...

11 Operation Warning There is a high voltage inside the product. Never disassemble, repair or modify the product yourself. • A fire or electric shock may result. • Contact Samsung Customer Service Centre for repairs. If the product generates abnormal sounds, a burning smell or smoke, disconnect the ...

12 Caution Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels. • Activate power-saving mode or a moving-picture screen saver if you will not be using the product for an extended period of time. Disconnect the power cord from...

13 – Contact the vendor where you purchased the product if any components are missing. – The pictures may look different from the actual components. – A stand is not provided with the product. To install a stand, you can purchase one separately. Checking the Components Components QUICK SETUP GUIDE W...

14 Parts Parts ― The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. POWER Power LED / Remote sensor Parts Description Remote sensor Press a button on the remote control pointing at the sensor on the front of the produc...

15 Reverse Side ― The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. RS232C IN OUT AUDIO OUT USB RJ45 (LAN OUT) HDBT (LAN IN) HDMI IN 1 HDMI IN 2 Port Description RS232C IN Connects to MDC using an RS232C cable. RS232C...

16 – Remote control button functions may differ for different products. – Remove batteries when the remote control is not to be used for an extended period of time. Remote Control ― Using other display devices in the same space as the remote control of this product can cause the other display device...

17 TOOLS INFO SET UNSET LOCK PC A DVI B HDMI C DP D EXIT RETURN IR control Display information about the current input source. Move to the upper, lower, left or right menu, or adjust an option's setting.Confirm a menu selection. Exit the current menu. Manually select a connected input source from HD...

18 Before Installing the Product (Installation Guide) 15 ˚ To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. • Ensure that an authorised installation company installs the wall mount. • Otherwise, it may fall and cause pers...

19 Installation on an Indented Wall ― Contact Samsung Customer Service Centre for further details. A Minimum 50 mm B Minimum 50 mm C Ambient temperature: Under 50°C ― When installing the product on an indented wall, allow at least the space specified above between the product and wall for ventilatio...

20 Wall Mount Kit Specifications ― Install your wall mount on a solid wall perpendicular to the floor. If you install the product on a slanted wall, it may fall and result in severe personal injury.Before attaching the wall mount to surfaces other than plaster board, please contact your nearest serv...

21 Remote Control (RS232C) Cable Connection RS232C Cable Interface RS232C (9 pins) Pin TxD (No.2), RxD (No.3), GND (No.5) Bit rate 9600 bps Data bits 8 bit Parity None Stop bit 1 bit Flow control None Maximum length 15 m (only shielded type) • Pin assignment 1 2 3 4 5 6 7 8 9 5 4 3 2 1 9 8 7 6 <M...

22 • RS232C cableConnector: 9-Pin D-Sub to Stereo Cable 5 1 6 9 -P2- 1 2 3 -P1- -P1- -P1- -P2- -P2- Male type RxTxGnd 325 ------------------------------ 213 TxRxGnd STEREOPLUG(3.5ø) LAN Cable • Pin assignment 1 2 3 4 5 6 7 8 Pin No Standard Colour Signal 1 White and orange TX+ 2 Orange TX- 3 White a...

24 Connection ― Ensure you connect each of the adapters to the correct RS232C IN or OUT port on the product. • Connection 1 RS232C IN OUT RS232C IN OUT RS232C IN OUT RS232C IN OUT • Connection 2 HDBT (LAN IN) HDBT (LAN IN) • Connection 3 RS232C OUT HDBT (LAN IN) RS232C IN OUT RS232C IN OUT RS232C IN...

25 Control Codes Viewing control state (Get control command) Header Command ID Data length Checksum 0xAA Command type 0 Controlling (Set control command) Header Command ID Data length Data Checksum 0xAA Command type 1 Value Command No. Command type Command Value range 1 Power control 0x11 0~1 2 Volu...

27 Input source control • FunctionThe input source of a product can be changed using a PC. • Viewing input source state (Get Input Source Status) Header Command ID Data length Checksum 0xAA 0x14 0 • Setting the input source (Set Input Source) Header Command ID Data length Data Checksum 0xAA 0x14 1 &...

28 Screen mode control • FunctionThe screen mode of a product can be changed using a PC.Screen mode cannot be controlled when the Video Wall function is enabled. • Viewing screen status (Get Screen Mode Status) Header Command ID Data length Checksum 0xAA 0x18 0 • Setting the picture size (Set Pictur...

29 Video Wall Mode Control • Function Video Wall mode can be activated on a product using a PC. This control is only available on a product whose Video Wall is enabled. • Viewing video wall mode (Get Video Wall Mode) Header Command ID Data length Checksum 0xAA 0x5C 0 • Setting the video wall (Set Vi...

33 Before Connecting Pre-connection Checkpoints ― Before connecting a source device, read the user manual provided with it.The number and locations of ports on source devices may differ from device to device. ― Do not connect the power cable until all connections are completed.Connecting the power c...

34 Before connecting cables ― The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Unfasten the screws, then remove the cover. 2 Silicone bar Remove the appropriate silicone bar for the thickness of the cable to connect....

35 Connecting to a PC • Do not connect the power cable before connecting all other cables.Ensure you connect a source device first before connecting the power cable. • A PC can be connected to the product in a variety of ways.Select a connection method suitable for your PC. ― Connecting parts may di...

36 Connecting to a Video Device • Do not connect the power cable before connecting all other cables.Ensure you connect a source device first before connecting the power cable. • You can connect a video device to the product using a cable. ― Connecting parts may differ in different products. ― Press ...

37 Connecting the HDBase-T ― The appearance may differ depending on the product. ― Connecting parts may differ in different products. ― HDBT (LAN IN) transmits data from an external device to HDBase-T (Tx). Make sure to connect them directly using a LAN cable. ― Data transmission is not available if...

38 Connecting to an Audio System ― The appearance may differ depending on the product. ― Connecting parts may differ in different products. AUDIO OUT Connecting the LAN Cable ― The appearance may differ depending on the product. ― Connecting parts may differ in different products. HDBT (LAN IN) • Us...

39 Changing the Input source (except the LH55OHFPSBC model) Source SOURCE → Source Source Web Browser HDMI 1 HDMI 2 MagicInfo S ― The displayed image may differ depending on the model. Source allows you to select a variety of sources and change source device names. You can display the screen of a so...

40 Web Browser (except the LH55OHFPSBC model) SOURCE → Source → Web Browser → ENTER E Web Browser ― The displayed image may differ depending on the model. ― Connect a LAN cable to access Internet from the product, similar to accessing the Internet from a computer. Settings SOURCE → Source → Web Brow...

42 Encoding Choose an encoding method for web pages. The current setting is Auto. • Auto / Manual (Current : Unicode) Refresh Options SOURCE → Source → Web Browser → u → Refresh Options → ENTER E Refresh Interval Set the time for the web browser to wait before returning to the home page. • Off / 5 m...

44 Web Browser SOURCE → Web Browser → ENTER E ― Connect the network to access the Internet from the product like accessing the Internet from a computer. Settings SOURCE → Web Browser → u → Settings → ENTER E Refresh Interval Set the time for the web browser to wait before returning to the home page....

46 MDC Programme Installation/Uninstallation Installation ― MDC installation can be affected by the graphics card, mother board and network conditions. 1 Click the MDC Unified installation programme. 2 Select a language for installation. Next, click " OK ". 3 When the " Welcome to the In...

47 Connecting to MDC Using MDC via RS-232C (serial data communications standards) An RS-232C serial cable must be connected to the serial ports on the PC and monitor. ― The appearance may differ depending on the product. RS232C OUT RS232C IN RS232C IN RS232C OUT RS232C IN Monitor 1 Monitor 2 Compute...

48 Connection using a cross LAN cable ― The appearance may differ depending on the product. ― Multiple products can be connected using the RS232C IN / OUT port on the product. Monitor 1 Monitor 2 Computer RS232C OUT RS232C OUT RS232C IN RS232C IN RJ45 (LAN OUT)

49 Player HOME → Player → ENTER E Play a range of content such as channels with schedules assigned, templates or files. Used 199.33 MB Available 4.26 GB(95%) 1 2 3 4 5 6 Player Filter By: All Options No channels Network Channel Network File My Templates Internal Memory ― The displayed image may diff...

50 When content is running Control buttons on the remote You can use buttons on your remote control to play, pause, or skip between content on the playlist. Button Function TOOLS Brings up the menu bar. INFO Displays the information of the content. ► Goes to next file or page. ◄ Goes to previous fil...

51 File Formats Compatible with Player • Supported file systems include FAT32 and NTFS. • A file with a vertical and horizontal resolution larger than the maximum resolution cannot be played.Check the vertical and horizontal resolution of the file. • Check the supported video and audio Codec types a...

52 Contents File Extension Container Video Codec Resolution Frame rate(fps) Bit rate(Mbps) Audio Codec *.avi*.mkv*.asf*.wmv*.mp4*.mov*.3gp*.vro*.mpg*.mpeg*.ts*.tp*.trp*.mov*.flv*.vob*.svi*.m2ts*.mts AVIMKVASFMP43GPMOVFLVVROVOBPSTSSVAF H.264 BP/MP/HP 4096x2160 4096X2160: 243840X2160: 30 40 AC3LPCMADP...

56 Schedule HOME → Schedule → ENTER E AM PM AM Sun Mon Tue Wed Thu Fri Sat 1 2 3 Schedule All day All day All day All day All day Network Information Location: Internal Memory Date: **-**-**** ~ **-**-**** Repeat: Daily Time: All day Connected ― The displayed image may differ depending on the model....

57 Clone Product HOME → Clone Product → ENTER E Clone Product ― The displayed image may differ depending on the model. Export settings on the product to an external storage device. You can also import settings from an external storage device.This option is useful when assigning the same settings to ...

58 ID Settings HOME → ID Settings → ENTER E ID Settings ― The displayed image may differ depending on the model. Assign an ID to a set. Device ID Enter the ID number of the product connected to the input cable for input signal reception. (Range: 0~224) ― Press u / d to select a number, and press E ....

59 Video Wall HOME → Video Wall → ENTER E Video Wall ― The displayed image may differ depending on the model. Customise the layout of multiple displays that are connected to form a video wall.In addition, display part of a whole picture or repeat the same picture on each of the connected multiple di...

60 Format Select how to display images on the videowall display. • Full : Display images in full screen with no margin. • Natural : Display images in the original aspect ratio without enlarging or reducing the size. ― The Format option is only enabled when Video Wall is set to On .

61 Network Status HOME → Network Status → ENTER E Network Status ― The displayed image may differ depending on the model. Check the current network and Internet connection.

62 Picture Mode HOME → Picture Mode → ENTER E Picture Mode ― The displayed image may differ depending on the model. Select a picture mode ( Picture Mode ) suitable for the environment where the product will be used. Videos/Images mode improves the picture quality of the video device. Text mode impro...

63 On/Off Timer HOME → On/Off Timer → ENTER E On/Off Timer ― The displayed image may differ depending on the model. ― You must set Clock Set before you can use this feature. On Timer Set On Timer so that your product turns on automatically at a time and on a day of your choosing. The power is turned...

65 Ticker HOME → Ticker → ENTER E Ticker ― The displayed image may differ depending on the model. Input text while a video or image is displayed and display the text on the screen. • Off / On • Message : Enter a message to display on the screen. • Time : Set the Start Time and End Time to display a ...

66 URL Launcher HOME → URL Launcher → ENTER E URL Launcher ― The displayed image may differ depending on the model. For details on how to use the URL Launcher feature, contact the dealer the product was purchased from. ― To use the URL Launcher feature, set Play via to URL Launcher in System .

67 URL Launcher Settings HOME → URL Launcher Settings → ENTER E URL Launcher Settings ― The displayed image may differ depending on the model. • Install Web App : Enter URL to install the web application. • Install from USB Device : Install the web application from the USB storage device. • Uninstal...

68 Approving a connected device from the server ― First configure the server Server Network Settings before device approval. 1 Access the server you have assigned to your device. 2 Enter your ID and password to log in. 3 Select Device from the top menu bar. 4 Select Unapproved from the sub-menus. 5 ...

70 Picture Mode MENU m → Picture → Picture Mode → ENTER E · · · Picture Picture Mode Backlight Contrast Brightness Sharpness Colour Tint (G/R) 100 70 45 65 50 G50 R50 ― The displayed image may differ depending on the model. Select a picture mode ( Picture Mode ) suitable for the environment where th...

72 Colour Temperature MENU m → Picture → Colour Temperature → ENTER E Picture Colour Temperature 16000K ― The displayed image may differ depending on the model. It sets colour temperature. The value and temperature increase simultaneously, so the ratio of blue colour rises. (Range: 2800K–16000K) ― E...

73 Gamma MENU m → Picture → Gamma → ENTER E Picture Gamma 0 ― The displayed image may differ depending on the model. Adjust the primary colour intensity. ― If Picture Mode is set to Calibration , Gamma is disabled. Calibrated value MENU m → Picture → Calibrated value → ENTER E Don't apply Picture Ca...

74 Advanced Settings MENU m → Picture → Advanced Settings → ENTER E Advanced Settings Dynamic Contrast Black Tone Flesh Tone RGB Only Mode Colour Space HDMI UHD Color Motion Lighting High Darkest 0 Off Native On ― The displayed image may differ depending on the model. ― If Picture Mode is set to Cal...

75 Advanced Settings Dynamic Contrast Black Tone Flesh Tone RGB Only Mode Colour Space HDMI UHD Color Motion Lighting High Darkest 0 Off Native On ― The displayed image may differ depending on the model. HDMI UHD Color Enable to optimise picture quality for HDMI UHD connection. • HDMI1 ( Off / On ) ...

76 Picture Options MENU m → Picture → Picture Options → ENTER E Picture Options Colour Tone Digital Clean View HDMI Black Level Film Mode Dynamic Backlight Off Auto Auto Off Off ― The displayed image may differ depending on the model. Colour Tone If Picture Mode is set to Text • Off / Cool / Standar...

77 Picture Options Colour Tone Digital Clean View HDMI Black Level Film Mode Dynamic Backlight Off Auto Auto Off Off ― The displayed image may differ depending on the model. HDMI Black Level Selects the black level on the screen to adjust the screen depth. • Auto / Low / Normal ― Available only in H...

78 Picture Size MENU m → Picture → Picture Size → ENTER E · · Picture Size Picture Size 16:9 Standard Fit to Screen Zoom/Position ― The displayed image may differ depending on the model. choose size and aspect ratio picture displayed on screen. Picture Size Different screen adjustment options are di...

79 Picture Off MENU m → Picture → Picture Off → ENTER E Picture Picture Off ― The displayed image may differ depending on the model. Selecting Picture Off switches off the screen. The volume is not disabled. To switch the screen on, press any button other than the volume button. Reset Picture MENU m...

80 OnScreen Display (except the LH55OHFPSBC model) Display Orientation MENU m → OnScreen Display → Display Orientation → ENTER E Display Orientation Onscreen Menu Orientation Source Content Orientation Aspect Ratio Landscape Landscape Full Screen ― The displayed image may differ depending on the mod...

81 Screen Protection MENU m → OnScreen Display → Screen Protection → ENTER E Screen Protection Auto Protection Time Screen Burn Protection Off ― The displayed image may differ depending on the model. Auto Protection Time If the screen displays a still image for a certain period of time you define, t...

82 Screen Burn Protection Pixel Shift Timer Immediate display Off ― The displayed image may differ depending on the model. Timer You can set the timer for Screen Burn Protection . The Screen Burn Protection feature stops automatically after a specified period of time. Timer OffRepeat : Display the i...

83 Screen Burn Protection Pixel Shift Timer Immediate display Off ― The displayed image may differ depending on the model. Immediate display Select the screen saver you want to display immediately. • Off / Pixel / Rolling bar / Fading screen

84 Message Display MENU m → OnScreen Display → Message Display → ENTER E Message Display Source Info No Signal Message MDC Message Download Status Message On On On Off ― The displayed image may differ depending on the model. Source Info Select whether to display the source OSD when the input source ...

85 Language MENU m → OnScreen Display → Language → ENTER E OnScreen Display Language English ― The displayed image may differ depending on the model. Set the menu language. ― A change to the language setting will only be applied to the onscreen menu display. It will not be applied to other functions...

86 Network Status MENU m → Network → Network Status → ENTER E You can check the current network and Internet status. Open Network Settings MENU m → Network → Open Network Settings → ENTER E Configure network settings to use various smart hub features such as Internet search, content sharing through ...

87 Network Settings (Wired) Connecting to a Wired Network There are three ways to attach your product to your LAN using cable. • You can attach your product to your LAN by connecting the LAN port on the back of your product to an external modem using a LAN cable.See the diagram below. The Modem Port...

88 Set the network connection to use Internet services such as perform software upgrades. Automatic Open Network Settings (Wired) Connect to the network using a LAN cable.Make sure a LAN cable is connected first. How to set up automatically 1 Set Network type to Wired from the Open Network Settings ...

89 Network Setting (Wireless) ― Models that do not support wireless communication: LH55OHF2VBC, LH46OHF2VBC Connecting to a Wireless Network The LAN Port on the Wall LAN Cable Wireless IP sharer (router having DHCP server) Samsung recommends using IEEE 802.11n. When you play video over a network con...

92 Server Network Settings MENU m → Network → Server Network Settings → ENTER E Connect to server To run Player connect to a network. • Server Address / SSL / Port ― If the SSL option is enabled, the server is configured to use https and data transfer is encrypted. ― Enter the server IP address and ...

94 Mobile Device Manager Allow other devices on your network, like smart phones and tablets, to share content with your product. ― Models that do not support wireless communication: LH55OHF2VBC, LH46OHF2VBC Access Notification Display a notification when a device is connected for the first time.Turn...

95 Accessibility MENU m → System → Accessibility → ENTER E System Accessibility Start Setup Time Auto Source Switching Power Control Eco Solution Fan and Temperature ― The displayed image may differ depending on the model. Menu Transparency Adjust transparency of menu box. • High / Low High Contrast...

96 Start Setup MENU m → System → Start Setup → ENTER E System Accessibility Start Setup Time Auto Source Switching Power Control Eco Solution Fan and Temperature ― The displayed image may differ depending on the model. Go through the initial setup steps like you did the first time you used this prod...

97 Time MENU m → System → Time → ENTER E Time Clock Set NTP Settings DST Sleep Timer Power On Delay On Off 0 ― The displayed image may differ depending on the model. You can configure Clock Set or Sleep Timer . Configure various time-related settings. ― Press the INFO button if you want to view the ...

98 Turning on the display with Auto Source Switching On , and the previous video source selection is not active, the display will automatically search the different video input sources for active video. Auto Source Switching When the Auto Source Switching is On , the display video source will automa...

99 Power Control MENU m → System → Power Control → ENTER E Power Control Auto Power On Max. Power Saving Standby Control Remote Configuration Power Button Off On On Off Power on only ― The displayed image may differ depending on the model. Auto Power On This feature automatically turns on the produc...

100 Remote Configuration This feature keeps the network power on when the product turns off. • Off / On Power Button The power button on the remote control can be set to turn on the power or turn on or off the power. • Power on only : Set the power button on the remote control only to turn on the po...

101 Eco Solution MENU m → System → Eco Solution → ENTER E Eco Solution Brightness Limit Energy Saving Mode Eco Sensor Screen Lamp Schedule No Signal Power Off Auto Power Off Off Off Off Off Off Off ― The displayed image may differ depending on the model. Brightness Limit Limit the screen's maximum b...

102 Screen Lamp Schedule Screen Lamp Schedule Enable or disable the lamp schedule. • Off / On Schedule 1, Schedule 2 Time The panel brightness will change to the brightness set in Lamp at a specified time. Lamp Adjust the panel brightness. A value closer to 100 makes the panel brighter. • 0 ~ 100 No...

103 Fan and Temperature MENU m → System → Fan and Temperature → ENTER E System Fan and Temperature ― The displayed image may differ depending on the model. Protects the product by detecting the fan speed and internal temperature. Fan Control Selects auto or manual for the fan speed settings. • Auto ...

104 Configure options for external input devices connected to the product. Keyboard Language Configure the key combination used to change the input language. Keyboard type Specify the keyboard type. Input Language Shortcut Select shortcut keys for switching between input languages. Input Device Mana...

105 The Change PIN screen will appear. Choose any 4 digits for your PIN and enter it in Enter New PIN . Reenter the same 4 digits in Confirm New PIN . The product has memorised your new PIN. ― Default password: 0 - 0 - 0 - 0 Change PIN MENU m → System → Change PIN → ENTER E System Change PIN ― The d...

106 Security MENU m → System → Security → ENTER E Security Safety Lock On USB Auto Play Lock Mobile Connection Lock Remote Management Power On Button On On Off ― The displayed image may differ depending on the model. Safety Lock On ― Enter your 4 digit PIN number. The default PIN number is “0-0-0-0&...

107 General MENU m → System → General → ENTER E General On On Off Smart Security Anynet+ (HDMI-CEC) HDMI Hot Plug Custom Logo Game Mode Empty Storage ― The displayed image may differ depending on the model. Smart Security The security provided to protect your display device and connected storage dev...

109 Troubleshooting for Anynet+ Problem Possible Solution Anynet+ does not work. • Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. • Check if the Anynet+ device power cord is properly connected. • Check the Anynet+ device’s Video/Audio/HDMI cable connectio...

110 HDMI Hot Plug This feature is used to activate the time delay to turn on a DVI/HDMI source device. • Off / On Custom Logo You can download, select, and set the display time of a custom logo that appears when the product turns on. • Custom Logo ― You can select a custom logo (image/video) or turn...

111 Reset System MENU m → System → Reset System → ENTER E System Reset System ― The displayed image may differ depending on the model. This option returns the current settings under system to the default factory settings. General Smart Security Anynet+ (HDMI-CEC) HDMI Hot Plug Custom Logo Game Mode ...

112 Software Update MENU m → Support → Software Update → ENTER E The Software Update menu lets you upgrade your product software to the latest version. ― Be careful not to turn off the power until the upgrade is complete. The product will turn off and on automatically after completing the software u...

113 Player HOME → Player → ENTER E Play a range of content such as channels with schedules assigned, templates or files. Player Filter By: All Options No channels Network Channel Network File My Templates Internal Memory ― The displayed image may differ depending on the model. – To use the Player fe...

114 When content is running Control buttons on the remote control You can play, pause, or skip the content on the playlist by pressing buttons on the remote control. Button Function TOOLS Brings up the menu bar. INFO Displays the general information of the content. ► Goes to next file or page. ◄ Goe...

116 Video codecs File Extension Container Video Codec Resolution Frame rate(fps) Bit rate(Mbps) Audio Codec *.avi*.mkv*.asf*.wmv*.mp4*.mov*.3gp*.vro*.mpg*.mpeg*.ts*.tp*.trp*.flv*.vob*.svi*.m2ts*.mts AVIMKVASFMP43GPMOVFLVVROVOBPSTSSVAF H.264 BP/MP/HP 4096 x 2160 4096 x 2160: 303840 x 2160: 60 60 Dolb...

127 Backlight / Brightness / Contrast / Sharpness MENU m → Picture → ENTER E Picture Backlight Brightness Contrast Sharpness Colour Temperature Advanced Settings Picture Options 100 45 70 50 10000 K ― The displayed image may differ depending on the model. Your product has several options for adjusti...

129 Advanced Settings MENU m → Picture → Advanced Settings → ENTER E Advanced Settings Picture Enhancer HDR+ Mode Colour Tint (G/R) White Balance Gamma On Off 50 0 BT.1886 0 BT.1886 ― The displayed image may differ depending on the model. Configure advanced picture settings to create your preferred ...

131 Flesh Tone Adjust the flesh tone colour by increasing or decreasing red levels. RGB Only Mode Fine-tune the saturation and tint of the red, green, and blue colour channels. • Off / Red / Green / Blue Colour Space Settings Configure colour space settings to refine the spectrum of colours on your ...

133 Apply Picture Settings MENU m → Picture → Apply Picture Settings → ENTER E Picture Apply Picture Settings All Sources ― The displayed image may differ depending on the model. Apply the picture settings to all external devices connected to the device or to the current source only. • All Sources /...

134 Picture Size Settings MENU m → Picture → Picture Size Settings → ENTER E Picture Size Settings Picture Size 16:9 Standard Off Fit to screen Zoom and Position ― The displayed image may differ depending on the model. Choose size and aspect ratio picture displayed on screen. Picture Size Different ...

136 OnScreen Display (applies to the LH55OHFPSBC model only) Display Orientation MENU m → OnScreen Display → Display Orientation → ENTER E Display Orientation Onscreen Menu Orientation Source Content Orientation Aspect Ratio Landscape Landscape Full Screen ― The displayed image may differ depending ...

138 Message Display MENU m → OnScreen Display → Message Display → ENTER E Message Display Source Info No Signal Message MDC Message Download Status Message On On On Off ― The displayed image may differ depending on the model. Source Info Select whether to display the source OSD when the input source...

140 Network (applies to the LH55OHFPSBC model only) Network Status MENU m → Network → Network Status → ENTER E You can check the current network and Internet status. Open Network Settings MENU m → Network → Open Network Settings → ENTER E Configure network settings to connect to an available network...

143 IPv6 MENU m → Network → IPv6 → ENTER E Enable or disable IPv6. • Off ( ) / On ( ) IPv6 Status MENU m → Network → IPv6 Status → ENTER E Check the status of your IPv6 Internet connection. Server Network Settings MENU m → Network → Server Network Settings → ENTER E Connect to server Connect to Magi...

144 FTP Mode Specify the FTP operating mode. • Active / Passive Proxy server Set up your proxy server connection and related functions. Off / On • Address / Port / ID / Password ― Address / Port / ID and Password are enabled only when Proxy server is set to On . Device Name MENU m → Network → Device...

145 System (applies to the LH55OHFPSBC model only) Accessibility MENU m → System → Accessibility → ENTER E System Accessibility Start Setup Time Auto Source Switching Power Control Eco Solution Fan and Temperature ― The displayed image may differ depending on the model. Chapter 15 High Contrast Set ...

151 Brightness Limit Turn the Brightness Limit on or off. If you select On , the display won't have the maximum brightness, but you will save energy. • Off / On Energy Saving Mode Reduce the power consumption by adjusting the screen brightness. • Off / Low / Medium / High Eco Sensor Automatically ad...

156 USB Auto Play Lock Select whether to automatically play MagicInfo content saved on a connected USB device. ― Your content should be a Published Content that is authored by using MagicInfo Premium application and published to the USB device you are using. The MagicInfo Premium application program...

161 Support (applies to the LH55OHFPSBC model only) Software Update MENU m → Support → Software Update → ENTER E The Software Update menu lets you upgrade your product software to the latest version. ― Be careful not to turn off the power until the upgrade is complete. The product will turn off and ...

162 Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Centre – Before calling Samsung Customer Service Centre, test your product as follows. If the problem persists, contact Samsung Customer Service Centre. Testing the Product Check if your product is operating normally b...

163 Check the followings. Installation issue (PC mode) The screen keeps switching on and off. Check the cable connection between the product and PC, and ensure the connection is secure. Blank spaces are found on all four sides of the screen when an HDMI or HDMI-DVI cable is connected to the product ...

171 Preset Timing Modes ― This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Using a resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select...

173 Responsibility for the Pay Service (Cost to Customers) ― When the service is requested, in spite of in warranty, we may charge you for a visit from a service technician in the following cases. Not a product defect Cleaning of the product, Adjustment, Explanation, Re-installation and etc. • If a ...

174 Optimum Picture Quality and Afterimage Burn-in Prevention Optimum Picture Quality • Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may be brighter or darker on the panel. This does not affect product performance. ‒ The number of sub-pixels by pan...

175 Preventing afterimage burn-in ― The best way to protect the product from afterimage burn-in is switching the power off or setting the PC or system to run a screen saver when not in use. Also, Warranty service may be limited depending on instruction guide. • Powering Off, Screen Saver and Power S...

176 Licence Manufactured under license from Dolby Laboratories.Dolby, Dolby Audio, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in...

177 Terminology 480i / 480p / 720p / 1080i / 1080p ____ Each of the scanning rates above refers to the number of effective scanning lines that decides the screen resolution. The scanning rate may be indicated in i (interlaced) or p (progressive), depending on the scanning method.- ScanningScanning r...