Samsung DM65E - User Manual

Page 2 - Table of contents

Table of contents Before Using the Product Copyright 7 Safety Precautions 8 Symbols 8Cleaning 8 Storage 9 Electricity and Safety 9 Installation 10Operation 12 Preparations Checking the Components 15 Components 15 Parts 16Control Panel 16 Reverse Side 18 Plug In Module (Sold separately) 21 Anti-theft...

Page 3 - Screen Adjustment

Table of contents Template 77 Clone Product 80 ID Settings 81Device ID 81PC Connection Cable 81Device ID Auto Set 81 Video Wall 82Apply to 82Video Wall 83 Network Status 84 Picture Mode 85 On/Off Timer 86On Timer 86Off Timer 87Holiday Management 87 Ticker 88 More settings 88 URL Launcher 89 Screen A...

Page 4 - Sound Adjustment; Network; System

Table of contents Sound Adjustment Sound Mode 114 Sound Effect 115Virtual Surround 115Dialog Clarity 115Equaliser 115 HDMI Sound 116 Sound on Video Call 116 Dolby Digital Comp 117 Speaker Settings 117Sound Output 117 Auto Volume 118 Reset Sound 118 Network Network Status 119 Network Settings 119Netw...

Page 5 - Support

Table of contents Smart Security 144BD Wise 145Anynet+ (HDMI-CEC) 146Troubleshooting for Anynet+ 148 HDMI Hot Plug 150DivX ® Video On Demand 150 Game Mode 150 Reset System 151 Support Software Update 152Update now 152Auto update 152 Contact Samsung 153 Go to Home 154Player 154Schedule 154Template 15...

Page 6 - Appendix

Table of contents Appendix Responsibility for the Pay Service (Cost to Customers) 184 Not a product defect 184 A Product damage caused by customer's fault 184Others 184 WEEE 185Correct Disposal of This Product (Waste Electrical & Electronic Equipment) 185 Correct disposal of batteries in this pr...

Page 7 - Before Using the Product; Copyright

7 Before Using the Product Copyright The contents of this manual are subject to change without notice to improve quality. © 2015 Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung El...

Page 8 - Safety Precautions; Caution; Symbols; Warning; Cleaning

8 Safety Precautions Caution RISK OF ELECTRIC SHOCK DO NOT OPENCaution : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. (OR BACK)THERE ARE NO USER SERVICEABLE PARTS INSIDE.REFER ALL SERVICING TO QUALIFIED PERSONNEL. This symbol indicates that high voltage is present inside.It is dangerou...

Page 10 - Installation

10 Caution Do not disconnect the power cord while the product is being used. • The product may become damaged by an electric shock. ! Only use the power cord provided with your product by Samsung. Do not use the power cord with other products. • A fire or electric shock may result. ! Keep the power ...

Page 12 - Operation

12 Operation Warning There is a high voltage inside the product. Never disassemble, repair or modify the product yourself. • A fire or electric shock may result. • Contact Samsung Customer Service Centre for repairs. ! Before moving the product, turn off the power switch and disconnect the power cab...

Page 15 - Checking the Components; Components; Preparations

15 - Contact the vendor where you purchased the product if any components are missing. - A stand is not provided with the product. To install a stand, you can purchase one separately. - The RS232C adapter can be used to connect to another monitor using the D-SUB (9-pin) type RS232C cable. - For LH32...

Page 16 - Parts; Control Panel; Panel Key; Buttons

16 Parts Control Panel DB32E DM32E Panel Key Speaker Speaker Remote sensor ― The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Panel Key Buttons Description Power on the product. If you press the button when the produ...

Page 17 - Control menu; Return

17 ― If you press the button on the panel key when the product is turned on, the control menu will be displayed. Control menu Return Buttons Description Source Select the connected input source. Move the panel key right to select Source in the control menu. When the list of input sources is displaye...

Page 18 - Reverse Side; Port

18 Reverse Side ― The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. ― Models DB32E, DB40E, DB48E, DB55E and DM32E are only supported. RGB IN RJ45 RS232C IN RS232C OUT AUDIO OUT USB HDMI IN DVI / MAGICINFO IN RGB / DVI...

Page 22 - Spacer logo

22 Spacer logo Do not pull on the spacer logo using force. The logo may tear or break off.

Page 23 - Remote Control; VOL

23 - Remote control button functions may differ for different products. Remote Control ― Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled. ― A button without a description in the image below is not ...

Page 24 - To place batteries in the remote control

24 TOOLS INFO SET UNSET LOCK PC A DVI B HDMI C DP D EXIT RETURN IR control Display information about the current input source. Move to the upper, lower, left or right menu, or adjust an option's setting.Confirm a menu selection. Exit the current menu. Manually select a connected input source from PC...

Page 25 - Connection Using an IR Stereo Cable (sold; Controlling more than one display product using; Controlling more than one display product using an

25 Connection Using an IR Stereo Cable (sold separately) ― The DBE and DM32E models do not support the IR OUT port. Make sure to connect the External ambient sensor while the product is powered off. Then, power on the product. Controlling more than one display product using your remote control • Con...

Page 26 - Before Installing the Product; Tilting Angle and Rotation; Ventilation; Installation on a Perpendicular Wall

26 Before Installing the Product (Installation Guide) 15 ˚ To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. • Ensure that an authorized installation company installs the wall mount. • Otherwise, it may fall and cause pers...

Page 27 - Installation on an Indented Wall; Plane view

27 A B C E Figure 1.3 Side view D D Figure 1.2 Side view Installation on an Indented Wall ― Contact Samsung Customer Service Centre for further details. Plane view A Minimum 40 mm B Minimum 70 mm C Minimum 50 mm D Minimum 50 mm E Ambient temperature: Under 35 C ― When installing the product on an in...

Page 29 - Installing the Wall Mount; Preparing before installing Wall-Mount

29 Installing the Wall Mount 1 Preparing before installing Wall-Mount To install a wall-mount from another manufacturer, use the Holder-Ring( 1 ). ― DM65E, DM75E models are only supported. Installing the Wall Mount The wall mount kit (sold separately) allows you to mount the product on the wall.For ...

Page 30 - Model name

30 • Samsung wall mount kits contain a detailed installation manual and all parts necessary for assembly are provided. • Do not use screws that are longer than the standard length or do not comply with the VESA standard screw specifications. Screws that are too long may cause damage to the inside of...

Page 31 - Cable Connection; Pin

31 Remote Control (RS232C) Cable Connection RS232C Cable Interface RS232C (9 pins) Pin TxD (No.2), RxD (No.3), GND (No.5) Bit rate 9600 bps Data bits 8 bit Parity None Stop bit 1 bit Flow control None Maximum length 15 m (only shielded type) • Pin assignment 1 2 3 4 5 6 7 8 9 5 4 3 2 1 9 8 7 6 <M...

Page 32 - LAN Cable; Pin No

32 • RS232C cableConnector: 9-Pin D-Sub to Stereo Cable LAN Cable • Pin assignment 1 2 3 4 5 6 7 8 Pin No Standard Colour Signal 1 White and orange TX+ 2 Orange TX- 3 White and green RX+ 4 Blue NC 5 White and blue NC 6 Green RX- 7 White and brown NC 8 Brown NC 5 1 6 9 -P2- 1 2 3 -P1- -P1- -P1- -P2- ...

Page 34 - Connection

34 Connection ― Ensure you connect each of the adapters to the correct RS232C IN or OUT port on the product. • Connection 1 RS232C IN OUT RS232C IN OUT RS232C IN OUT RS232C IN OUT • Connection 2 RJ45 RJ45 • Connection 3 RS232C OUT RJ45 RS232C IN OUT RS232C IN OUT RS232C IN OUT

Page 35 - Control Codes; Viewing control state (Get control command)

35 Control Codes Viewing control state (Get control command) Header Command ID Data length Checksum 0xAA Command type 0 Controlling (Set control command) Header Command ID Data length Data Checksum 0xAA Command type 1 Value Command No. Command type Command Value range 1 Power control 0x11 0~1 2 Volu...

Page 36 - Power control; Volume control

36 Power control • FunctionA product can be powered on and off using a PC. • Viewing power state (Get Power ON / OFF Status) Header Command ID Data length Checksum 0xAA 0x11 0 • Setting power ON/Off (Set Power ON / OFF) Header Command ID Data length Data Checksum 0xAA 0x11 1 "Power" "Pow...

Page 37 - Input source control

37 Input source control • FunctionThe input source of a product can be changed using a PC. • Viewing input source state (Get Input Source Status) Header Command ID Data length Checksum 0xAA 0x14 0 • Setting the input source (Set Input Source) Header Command ID Data length Data Checksum 0xAA 0x14 1 &...

Page 38 - Screen mode control; Screen size control

38 Screen mode control • FunctionThe screen mode of a product can be changed using a PC.Screen mode cannot be controlled when the Video Wall function is enabled. ― This control can only be used on models that include a TV. • Viewing screen status (Get Screen Mode Status) Header Command ID Data lengt...

Page 39 - Auto adjustment control (PC and BNC only)

39 PIP On/Off control • FunctionThe PIP mode of a product can be turned on or off using a PC. ― Only available on models that have the PIP function. ― The mode cannot be controlled if Video Wall is set to On . ― This function is not available in MagicInfo . • Viewing PIP on/off state (Get the PIP ON...

Page 40 - Video Wall Mode Control

40 Video Wall Mode Control • Function Video Wall mode can be activated on a product using a PC. This control is only available on a product whose Video Wall is enabled. • Viewing video wall mode (Get Video Wall Mode) Header Command ID Data length Checksum 0xAA 0x5C 0 • Setting the video wall (Set Vi...

Page 44 - Connecting and Using a Source Device; Before Connecting; Pre-connection Checkpoints; Connecting to a PC

44 Connecting and Using a Source Device Before Connecting Pre-connection Checkpoints ― Before connecting a source device, read the user manual provided with it. The number and locations of ports on source devices may differ from device to device. ― Do not connect the power cable until all connection...

Page 45 - Connection using a DVI cable (Digital type); Connection Using an HDMI-DVI Cable

45 Connection using a DVI cable (Digital type) DVI / MAGICINFO IN RGB / DVI / HDMI / AV / COMPONENT AUDIO IN ― You can use the DVI port on the product as an HDMI port by using a DVI-HDMI adapter. DVI / MAGICINFO IN HDMI Connection Using an HDMI-DVI Cable After connecting a computer to the product wi...

Page 46 - Connection Using an HDMI Cable; Connection Using an DP Cable

46 Connection Using an HDMI Cable HDMI IN Connection Using an DP Cable DP IN • Precautions for using DP ― To increase the standby power capacity, the product stops DP communication when it is turned off or in power-saving mode.If the product in dual monitor mode is turned off or goes into power-savi...

Page 47 - Connecting an External Monitor

47 Connecting an External Monitor • Do not connect the power cable before connecting all other cables.Ensure you connect a source device first before connecting the power cable. ― Connecting parts may differ in different products. ― The DP OUT port is only available when the input source is PC , DVI...

Page 48 - Connecting to a Video Device; Connection Using the AV Cable; Connection Using the component Cable

48 Connecting to a Video Device • Do not connect the power cable before connecting all other cables.Ensure you connect a source device first before connecting the power cable. • You can connect a video device to the product using a cable. ― Connecting parts may differ in different products. ― Press ...

Page 50 - Using an HDMI cable or HDMI to DVI Cable (up to 1080p); Connecting to an Audio System

50 Connection Using an HDMI Cable Using an HDMI cable or HDMI to DVI Cable (up to 1080p) • For better picture and audio quality, connect to a digital device using an HDMI cable. • An HDMI cable supports digital video and audio signals, and does not require an audio cable. - To connect the product to...

Page 51 - Connecting the LAN Cable

51 Connecting the LAN Cable ― Connecting parts may differ in different products. RJ45 • Use Cat7(*STP Type) cable for the connection. *Shielded Twist Pair.

Page 52 - Changing the Input source; Edit Name; Information

52 Changing the Input source Source SOURCE → Source Source MagicInfo S MagicIWB S HDMI Component AV PC To go to Options, press and hold the Enter button. - The displayed image may differ depending on the model. - The MagicIWB S software allows you to play a variety of content on a large touchscreen ...

Page 53 - Using MDC; MDC Programme Installation/Uninstallation; Uninstallation

53 Using MDC MDC Programme Installation/Uninstallation Installation ― MDC installation can be affected by the graphics card, mother board and network conditions. 1 Click the MDC Unified installation programme. 2 Select a language for installation. Next, click " OK ". 3 When the " Welcome...

Page 54 - Connecting to MDC

54 Connecting to MDC Using MDC via RS-232C (serial data communications standards) An RS-232C serial cable must be connected to the serial ports on the PC and monitor. RS232C IN RS232C OUT Monitor 1 Monitor 2 Computer

Page 55 - Using MDC via Ethernet; Connection using a direct LAN cable

55 Using MDC via Ethernet Enter the IP for the primary display device and connect the device to the PC. Display devices can be connected to each other using a LAN cable. Connection using a direct LAN cable ― Multiple products can be connected using the RJ45 port on the product and the LAN ports on t...

Page 56 - Connection using a cross LAN cable

56 Connection using a cross LAN cable ― Multiple products can be connected using the RS232C IN / OUT port on the product. Monitor 1 Monitor 2 Computer RS232C OUT RJ45

Page 57 - Home feature; Player

57 Home feature ― To use the Player feature, set Play via to MagicInfo in System . Play a range of content such as channels with schedules assigned, templates or files.Play channels or content using any of the following methods. • Network Channel : Play content using the server. ― To run Network Cha...

Page 58 - Approving a connected device from the server; Approving the Lite server

58 Approving a connected device from the server Approving the Lite server • Set MagicInfo Mode to Lite in Server Network Settings . Approve and use the Lite server now. ― First configure the server Network Settings before device approval. 1 Access the server you have assigned to your device. 2 Enter...

Page 59 - Setting the current time

59 7 Enter the information required to approve the device. • Device Name : Enter the device name. • Device Group : Select to specify the group. • Location : Enter the current location of the device. ― Pressing the INFO button on the remote when a network schedule is running will display the details ...

Page 60 - Approving the Premium server

60 Approving the Premium server • Set MagicInfo Mode to Premium in Server Network Settings . Approve and use the Premium server now. ― First configure the server Network Settings before device approval. 1 Access the server you have assigned to your device. 2 Enter your ID and password to log in. 3 S...

Page 62 - Local Channel

62 Network Channel Play content, templates and schedules configured on the server. • You can view whether the server is connected (approval) in the Player menu screen. To view whether the server is connected when a Network Channel is running, press INFO on the remote. 1 Select Network Channel from t...

Page 63 - Available features in the Player page; Menu items in the Player page; Option Name

63 Available features in the Player page The Player list page provides the following features. • Device Select either Internal or USB to search for a desired device list. - All / Internal / USB • Content Select a content type as criterion to search for a desired content list. - All / Video / Image /...

Page 64 - Player page Settings menu; Settings

64 Player page Settings menu Settings Settings Default Storage Picture Size Display Duration Transition Effect Content Orientation Internal Random Landscape Select the storage location that you want to download scheduled channels from the network to. Close - The displayed image may differ depending ...

Page 65 - Default content; Safely Remove; Reset

65 Default content This default content will be displayed if you run a channel while no programmes are scheduled on the channel. • None Safely Remove Safely removes USB memory Reset Restore all the values under Settings to the default when the product was purchased.

Page 66 - When Content is Running; Viewing the details of the content that is running

66 When Content is Running Viewing the details of the content that is running Information Current Time: Type: CH Number: CH Name: Software Version: No Schedule to download 00:00am Network Channel No channels selected No channels selected DTP-EP-APP-5371 OK - The displayed image may differ depending ...

Page 67 - Changing the settings for the content that is running

67 Changing the settings for the content that is running Music Playlist Picture Mode Sound Mode Repeat - The displayed image may differ depending on the model. - This feature is not available when content is playing through Video Wall . Press the TOOLS button on the remote control during content pla...

Page 68 - File Formats Compatible with Player; Network Schedule Multiframe; Playback restrictions; Restrictions

68 File Formats Compatible with Player • Supported file systems include FAT32 and NTFS. • A file with a vertical and horizontal resolution larger than the maximum resolution cannot be played.Check the vertical and horizontal resolution of the file. • Check the supported video and audio Codec types a...

Page 69 - Contents; File Extension Container

69 Contents File Extension Container Video Codec Resolution Frame rate(fps) Bit rate(Mbps) Audio Codec *.avi*.mkv*.asf*.wmv*.mp4*.mov*.3gp*.vro*.mpg*.mpeg*.ts*.tp*.trp*.flv*.vob*.svi*.m2ts*.mts*.divx AVIMKVASFMP43GPVROVOBPSTS DivX 3.11 / 4.x / 5.x / 6.x 1920 x 1080 6~30 30 AC3LPCMAACHE-AACWMADD+MPEG...

Page 73 - File Formats Compatible with Videowall; Video

73 File Formats Compatible with Videowall ― Refer to the <MagicInfo Server user's manual> for further details. Video Image • 3D video is not supported. • Content with a resolution larger than the resolution specified in the table above is not supported. • Video content with a Bit rate or Frame...

Page 75 - Available features in the Schedule page; Menu items in the Schedule page

75 Schedule HOME → Schedule → ENTER E 12:00 12:30 01:00 01:30 02:00 02:30 03:00 03:30 04:00 04:30 05:00 05:30 06:00 Add content to create a programme on the channel. Configure the display duration to set how long each item of content will play for. Set a start time and a stop time for the programme....

Page 76 - Configuring channel schedules; Editing a channel schedule.

76 Configuring channel schedules Play media content such as videos, photos and music at a desired time. 1 Select a channel to configure. 2 Select video, music and photo content you want to apply to the channel schedule. 3 Set the time to play the schedule. ( Start Time ~ Stop Time ) 4 Change the cha...

Page 77 - Available features in the Template page

77 Template HOME → Template → ENTER E Market : All Orientation : Landscape 1 / 64 item(s) Select a template to customise. Template My Templates - The displayed image may differ depending on the model. Available features in the Template page Create unique content using templates. It is easy to create...

Page 78 - Entering text; Edit Text; Inserting content such as videos, photos and PDF files; Configuring the background image/background music

78 Entering text New town interior design Sustainble evolution unfolods tomorrw’s design bg_co... A a Background Screen Background Music Select in the editable zone to add content or edit the existing text. Press the volume button on the remote to change the font size. Create Template Preview Save E...

Page 79 - Save

79 Preview New town interior design Sustainble evolution unfolods tomorrw’s design Template preview is running. It will stop after 20 seconds. 1 Preview the created template using the Preview feature. 2 To save the template, press the Save button. 3 Configure Template Name and Storage . Save Duratio...

Page 80 - Clone Product; When USB does not contain a duplicate file

80 Clone Product HOME → Clone Product → ENTER E Clone Product - The displayed image may differ depending on the model. Export the product settings to a USB device or load the settings via a USB device.This option is useful when assigning the same settings to several products. When USB does not conta...

Page 81 - ID Settings; Device ID; PC Connection Cable; Device ID Auto Set

81 ID Settings HOME → ID Settings → ENTER E ID Settings - The displayed image may differ depending on the model. Assign an ID to a set. Device ID Enter the ID number of the product connected to the input cable for input signal reception. (Range: 0~224) ― Press u / d to select a number, and press E ....

Page 82 - Apply to

82 Video Wall HOME → Video Wall → ENTER E Video Wall - The displayed image may differ depending on the model. Customize the layout of multiple displays that are connected to form a video wall.In addition, display part of a whole picture or repeat the same picture on each of the connected multiple di...

Page 83 - Horizontal x Vertical

83 Video Wall You can activate or deactivate Video Wall . To organize a video wall, select On . • Off / On Horizontal x Vertical This feature automatically splits a videowall display based on a videowall matrix configuration.Enter the videowall matrix.The videowall display is split based on the conf...

Page 84 - Network Status

84 Check the current network and Internet connection. Network Status HOME → Network Status → ENTER E Network Status - The displayed image may differ depending on the model.

Page 85 - Picture Mode

85 Picture Mode HOME → Picture Mode → ENTER E Picture Mode - The displayed image may differ depending on the model. Select a picture mode ( Picture Mode ) suitable for the environment where the product will be used. Videos/Images mode improves the picture quality of the video device. Text mode impro...

Page 86 - On Timer

86 On/Off Timer HOME → On/Off Timer → ENTER E On/Off Timer - The displayed image may differ depending on the model. ― You must set Clock Set before you can use this feature. On Timer Set On Timer so that your product turns on automatically at a time and on a day of your choosing. The power is turned...

Page 88 - Ticker; More settings

88 Ticker HOME → Ticker → ENTER E Ticker - The displayed image may differ depending on the model. Input text while a video or image is displayed and display the text on the screen. • Off / On • Message : Enter a message to display on the screen. • Time : Set the Start Time and End Time to display a ...

Page 89 - URL Launcher

89 URL Launcher HOME → URL Launcher → ENTER E URL Launcher 12:00 Change URL pm January 1 2015 Clone Product Picture Mode ID Settings On/Off Timer Video Wall Ticker Network Status More settings - The displayed image may differ depending on the model. For details on how to use the URL Launcher feature...

Page 90 - Picture

90 Screen Adjustment Configure the Picture settings ( Backlight , Colour Tone , etc.). The layout of the Picture menu options may vary depending on the product. Picture Mode MENU m → Picture → Picture Mode → ENTER E · · · · · · Picture Picture Mode Backlight Contrast Brightness Sharpness Colour Tint...

Page 92 - Colour Temperature

92 Colour Temperature MENU m → Picture → Colour Temperature → ENTER E Picture Colour Temperature 16000K - The displayed image may differ depending on the model. Adjust the colour temperature (Red / Green / Blue). (Range: 2800K–16000K) ― Enabled when Colour Tone is set to Off . ― Colour Temperature i...

Page 93 - White Balance; Point

93 White Balance MENU m → Picture → White Balance → ENTER E Picture White Balance - The displayed image may differ depending on the model. 2 Point Adjust the colour temperature for a more natural picture. • R-Offset / G-Offset / B-Offset : Adjust each colour’s (red, green, blue) darkness. • R-Gain /...

Page 94 - Gamma; Calibrated value

94 Gamma MENU m → Picture → Gamma → ENTER E Picture Gamma 0 - The displayed image may differ depending on the model. Adjust the primary colour intensity. ― If Picture Mode is set to Calibration , Gamma is disabled. Calibrated value MENU m → Picture → Calibrated value → ENTER E Picture Calibrated val...

Page 95 - Advanced Settings; Dynamic Contrast

95 Advanced Settings MENU m → Picture → Advanced Settings → ENTER E Advanced Settings Dynamic Contrast Black Tone Flesh Tone RGB Only Mode Colour Space Motion Lighting High Darkest 0 Off Native Off - The displayed image may differ depending on the model. Picture Mode Picture Mode settings Adjustable...

Page 97 - Picture Options; Colour Tone

97 Picture Options MENU m → Picture → Picture Options → ENTER E Picture Options Colour Tone Digital Clean View MPEG Noise Filter HDMI Black Level Film Mode Motion Plus Dynamic Backlight Off Off Off Low Off Off Off - The displayed image may differ depending on the model. - Motion Plus is only availab...

Page 98 - Digital Clean View; MPEG Noise Filter

98 Picture Options Colour Tone Digital Clean View MPEG Noise Filter HDMI Black Level Film Mode Motion Plus Dynamic Backlight Off Off Off Low Off Off Off - The displayed image may differ depending on the model. - Motion Plus is only available on the DM65E, DM75E models. Colour Tone If Picture Mode is...

Page 99 - HDMI Black Level; Film Mode

99 Picture Options Colour Tone Digital Clean View MPEG Noise Filter HDMI Black Level Film Mode Motion Plus Dynamic Backlight Off Off Off Low Off Off Off - The displayed image may differ depending on the model. - Motion Plus is only available on the DM65E, DM75E models. HDMI Black Level Selects the b...

Page 100 - Dynamic Backlight

100 Picture Options Colour Tone Digital Clean View MPEG Noise Filter HDMI Black Level Film Mode Motion Plus Dynamic Backlight Off Off Off Low Off Off Off - The displayed image may differ depending on the model. - Motion Plus is only available on the DM65E, DM75E models. Motion Plus ― Models DM65E an...

Page 101 - Picture Size; Picture Size; Picture Size

101 Picture Size MENU m → Picture → Picture Size → ENTER E · Picture Size Picture Size 16:9 Position Resolution Off - The displayed image may differ depending on the model. choose size and aspect ratio picture displayed on screen. Picture Size ― Different screen adjustment options are displayed depe...

Page 102 - Position

102 Position · Picture Size Picture Size Custom Position Resolution Off - The displayed image may differ depending on the model. Adjusts the picture position. Position is only available if Picture Size is set to Zoom1 , Zoom2 , Wide Fit , Screen Fit or Custom . ― To use the Position function after s...

Page 103 - Resolution

103 Resolution If the picture is not normal even when the resolution of the graphics card is one of the following, you can optimize the picture quality by selecting the same resolution for the product as the PC using this menu.Available resolutions: Off / 1024x768 / 1280x768 / 1360x768 / 1366x768

Page 104 - Auto Adjustment; PC Screen Adjustment

104 Auto Adjustment MENU m → Picture → Auto Adjustment → ENTER E Picture Auto Adjustment - Available in PC mode only. - The displayed image may differ depending on the model. Adjust frequency values/positions and fine tune the settings automatically. PC Screen Adjustment MENU m → Picture → PC Screen...

Page 105 - Picture Off; Reset Picture

105 Picture Off MENU m → Picture → Picture Off → ENTER E Picture Picture Off - The displayed image may differ depending on the model. Selecting Picture Off switches off the screen. The volume is not disabled. To switch the screen on, press any button other than the volume button. Reset Picture MENU ...

Page 106 - PIP; PIP; PIP Settings; Main picture

106 OnScreen Display PIP MENU m → OnScreen Display → PIP → ENTER E OnScreen Display PIP Display Orientation Screen Protection Message Display Menu Language Reset OnScreen Display English - The displayed image may differ depending on the model. - For PIP sound, refer to the Sound Select instructions....

Page 108 - Display Orientation; Onscreen Menu Orientation; Source Content Orientation

108 Display Orientation MENU m → OnScreen Display → Display Orientation → ENTER E Display Orientation Onscreen Menu Orientation Source Content Orientation Aspect Ratio Landscape Landscape Full Screen - The displayed image may differ depending on the model. Onscreen Menu Orientation Set the menu scre...

Page 109 - Screen Protection; Auto Protection Time; Pixel Shift; Available Pixel Shift Settings and Optimum Settings.; Available Settings

109 Screen Protection MENU m → OnScreen Display → Screen Protection → ENTER E Screen Protection Auto Protection Time Screen Burn Protection Off - The displayed image may differ depending on the model. Auto Protection Time If the screen displays a still image for a certain period of time you define, ...

Page 110 - Screen Burn Protection; Timer

110 Screen Burn Protection Pixel Shift Timer Immediate display Side Grey Off Off - The displayed image may differ depending on the model. Timer You can set the timer for Screen Burn Protection . The Screen Burn Protection feature stops automatically after a specified period of time. Timer OffRepeat ...

Page 111 - Immediate display; Side Grey

111 Screen Burn Protection Pixel Shift Timer Immediate display Side Grey Off Off - The displayed image may differ depending on the model. Immediate display Select the screen saver you want to display immediately. • Off / Pixel / Rolling bar / Fading screen Side Grey When the screen is set to 4:3 asp...

Page 112 - Message Display; Source Info

112 Message Display MENU m → OnScreen Display → Message Display → ENTER E Message Display Source Info No Signal Message MDC Message Download Status Message On On On Off - The displayed image may differ depending on the model. Source Info Select whether to display the source OSD when the input source...

Page 113 - Menu Language; Reset OnScreen Display

113 Menu Language MENU m → OnScreen Display → Menu Language → ENTER E OnScreen Display Menu Language English - The displayed image may differ depending on the model. Set the menu language. ― A change to the language setting will only be applied to the onscreen menu display. It will not be applied to...

Page 114 - Sound; Sound Mode

114 Sound Adjustment Configure the sound ( Sound ) settings for the product. Sound Mode MENU m → Sound → Sound Mode → ENTER E Sound Sound Mode Sound Effect HDMI Sound Sound on Video Call Dolby Digital Comp Speaker Settings Auto Volume Standard AV(HDMI) Current Source RF Off - The displayed image may...

Page 115 - Sound Effect; Virtual Surround; Virtual Surround

115 Sound Effect MENU m → Sound → Sound Effect → ENTER E Sound Effect Virtual Surround Dialog Clarity Equaliser Off Off - The displayed image may differ depending on the model. Configure your preferred sound effect for output sound. ― If Speaker Settings is set to External , Sound Effect is disabled...

Page 116 - HDMI Sound; Sound on Video Call

116 HDMI Sound MENU m → Sound → HDMI Sound → ENTER E Sound HDMI Sound AV(HDMI) - The displayed image may differ depending on the model. Select whether to hear from AV(HDMI) or PC(DVI) . • AV(HDMI) / PC(DVI) Sound on Video Call MENU m → Sound → Sound on Video Call → ENTER E Sound Sound on Video Call ...

Page 117 - Dolby Digital Comp; Speaker Settings; Sound Output

117 Dolby Digital Comp MENU m → Sound → Dolby Digital Comp → ENTER E Sound Dolby Digital Comp RF - The displayed image may differ depending on the model. Set Dolby Digital Compression mode. • Line / RF Speaker Settings MENU m → Sound → Speaker Settings → ENTER E Sound Speaker Settings - The displaye...

Page 118 - Auto Volume; Reset Sound

118 Auto Volume MENU m → Sound → Auto Volume → ENTER E Sound Auto Volume Off - The displayed image may differ depending on the model. The volume can vary depending on the channel.Automatically equalize the volume level when switching to another channel. • Off / Normal / Night Normal equalizes the vo...

Page 119 - Network type

119 Network Network Status MENU m → Network → Network Status → ENTER E You can check the current network and Internet status. Network Status Your wireless network and Internet connection are setup and ready to use. You are connected to the Internet. If you have any problems using online services, pl...

Page 120 - Connecting to a Wired Network

120 Network Settings (Wired) Connecting to a Wired Network There are three ways to attach your product to your LAN using cable. • You can attach your product to your LAN by connecting the LAN port on the back of your product to an external modem using a LAN cable.See the diagram below. RJ45 The Mode...

Page 121 - How to set up automatically; Getting the Network Connection Values; How to set up manually

121 Set the network connection to use Internet services such as perform software upgrades. Automatic Network Settings (Wired) Connect to the network using a LAN cable.Make sure a LAN cable is connected first. How to set up automatically 1 Set Network type to Wired from the Network Settings page. 2 P...

Page 122 - Connecting to a Wireless Network

122 Network Setting (Wireless) Connecting to a Wireless Network The LAN Port on the Wall Wireless IP sharer (router having DHCP server) LAN Cable Samsung recommends using IEEE 802.11n. When you play video over a network connection, the video may not play smoothly. ― Select a channel for the wireless...

Page 125 - Multimedia Device Settings

125 To use this function, your mobile device should be supported by the Wi-Fi Direct . Wi-Fi Direct MENU m → Network → Wi-Fi Direct → ENTER E Set to connect the product to wireless mobile devices. Using this function, you can connect wireless mobile devices with your product directly without a route...

Page 126 - Screen Mirroring; Server Network Settings; Connect to server

126 Screen Mirroring MENU m → Network → Screen Mirroring → ENTER E Connect a mobile device that supports the mirroring function to the product. This allows the screen and sound from the mobile device to be outputted on the product. Mirroring refers to outputting the screen and sound from a mobile de...

Page 127 - Device Name

127 Device Name MENU m → Network → Device Name → ENTER E Select or enter a device name.This name can be shown on network remote controls over the network. • User Input / [Signage]Display 1 ~ 6

Page 128 - Accessibility; Menu Transparency; High Contrast

128 System Accessibility MENU m → System → Accessibility → ENTER E Accessibility Menu Transparency High Contrast Enlarge Medium Off Off - The displayed image may differ depending on the model. Menu Transparency Adjust transparency of menu box. • High / Medium / Low High Contrast Set the background a...

Page 129 - Setup

129 Setup MENU m → System → Setup → ENTER E System Accessibility Setup Touch Control Time Auto Source Switching Power Control Eco Solution - The displayed image may differ depending on the model. Initial settings (System) After powering on the product for the first time, configure basic settings suc...

Page 131 - Touch Control; Touch Control Lock; Touch Control Lock

131 Touch Control MENU m → System → Touch Control → ENTER E Touch Control Touch Control Lock Admin Menu Lock Off Off - The displayed image may differ depending on the model. Configure touch control related features. Touch Control Lock Lock the touchscreen control mode to prevent devices from being c...

Page 132 - Time; Clock Set

132 Time MENU m → System → Time → ENTER E Time Clock Set DST Sleep Timer Power On Delay Off Off 0 sec - The displayed image may differ depending on the model. You can configure Clock Set or Sleep Timer . You can also set the product to automatically turn on or off at a specified time using the Timer...

Page 133 - Auto Source Switching; Auto Source Switching

133 Turning on the display with Auto Source Switching On , and the previous video source selection is not active, the display will automatically search the different video input sources for active video. Auto Source Switching When the Auto Source Switching is On , the display video source will autom...

Page 134 - Power Control; Auto Power On

134 Power Control MENU m → System → Power Control → ENTER E Power Control Auto Power On PC module power Max. Power Saving Standby Control Power Button Network Standby Off On Auto Power on only Off - The displayed image may differ depending on the model. Auto Power On This feature automatically turns...

Page 135 - Standby Control

135 Standby Control You can set the screen standby mode to be applied when an input signal is received. • Auto Power-saving mode will activate if no input signals are detected even though a source device is connected to the display.The message No Signal will appear if no source device is connected. ...

Page 136 - Eco Solution; Energy Saving

136 Eco Solution MENU m → System → Eco Solution → ENTER E Eco Solution Energy Saving Eco Sensor Screen Lamp Schedule No Signal Power Off Auto Power Off Off Off Off Off 4 hours - The displayed image may differ depending on the model. Energy Saving Reduce the power consumption by adjusting the screen ...

Page 137 - No Signal Power Off; Auto Power Off; Temperature Control

137 Eco Solution Energy Saving Eco Sensor Screen Lamp Schedule No Signal Power Off Auto Power Off Off Off Off Off 4 hours - The displayed image may differ depending on the model. No Signal Power Off Save power by turning the device off when no signal is received from any source. • Off / 15 min / 30 ...

Page 138 - Device Manager; Keyboard Settings; Select Keyboard; Keyboard Options; Keyboard Language; Keyboard type; Switch Input Language

138 Device Manager MENU m → System → Device Manager → ENTER E Device Manager Keyboard Settings Mouse Settings Pointer Settings - The displayed image may differ depending on the model. Configure options for external input devices connected to the product. Keyboard Settings Connecting a keyboard to th...

Page 139 - Mouse Settings; Select Mouse; Mouse Options; Primary Button

139 Mouse Settings Connecting a mouse to the product displays the Mouse Settings menu. Select Mouse Configure mouse connection settings or options for connected mouse devices. ― Among connected mouse devices, only one mouse can be used. Mouse Options ― Depending on the country. Primary Button Select...

Page 140 - Pointer Settings; Pointer Size; Pointer Speed

140 Device Manager Keyboard Settings Mouse Settings Pointer Settings - The displayed image may differ depending on the model. Pointer Settings Specify the pointer size, speed and shape. Pointer Size Specify the pointer size. • Small / Medium / Large / Extra Large Pointer Speed Specify the pointer sp...

Page 141 - Play via; Change PIN

141 Play via MENU m → System → Play via → ENTER E System Play via MagicInfo - The displayed image may differ depending on the model. Select the appropriate Play via mode depending on the environment where you are using the product. The home screen may be different depending on the setting. • MagicIn...

Page 142 - Security; Power On Button; Button Lock

142 Security MENU m → System → Security → ENTER E · Security Safety Lock Power On Button Button Lock USB Auto Play Lock Mobile Connection Lock Off Off Off Off Off - The displayed image may differ depending on the model. Safety Lock ― Enter your 4 digit PIN number. The default PIN number is “0-0-0-0&...

Page 143 - USB Auto Play Lock; Mobile Connection Lock

143 · Security Safety Lock Power On Button Button Lock USB Auto Play Lock Mobile Connection Lock Off Off Off Off Off - The displayed image may differ depending on the model. USB Auto Play Lock Select whether to automatically play MagicInfo content saved on a connected USB device. • Off Play MagicInf...

Page 144 - General; Smart Security; Smart Security; Scan; Isolated List; Auto Scan; Move to Isolated List automatically

144 General MENU m → System → General → ENTER E General Smart Security BD Wise Anynet+ (HDMI-CEC) HDMI Hot Plug DivX ® Video On Demand Game Mode On On On On Off - The displayed image may differ depending on the model. Smart Security Security provided to protect your TV and connected storage devices ...

Page 145 - BD Wise

145 BD Wise Provides the optimal picture quality for Samsung DVD, Blu-ray and Home Theatre products which support BD Wise . When BD Wise is turned On , the picture mode is automatically changed to the optimal resolution. • Off / On ― Available when you connect Samsung products that support BD Wise t...

Page 146 - Description

146 Anynet+ (HDMI-CEC) Anynet+ (HDMI-CEC) Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung product remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has ...

Page 147 - Switching between Anynet+ Devices; Auto Turn Off

147 Auto Turn Off Setting an Anynet+ Device to turn Off automatically when the product is turned off. • No / Yes ― If Auto Turn Off is set to Yes , running external devices will turn off at the same time as the product powers off. ― May not be enabled depending on the device. Search for Devices Swit...

Page 148 - Troubleshooting for Anynet+; Problem

148 Troubleshooting for Anynet+ Problem Possible Solution Anynet+ does not work. • Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. • Check if the Anynet+ device power cord is properly connected. • Check the Anynet+ device’s Video/Audio/HDMI cable connectio...

Page 150 - Game Mode; HDMI Hot Plug

150 HDMI Hot Plug This feature is used to activate the time delay to turn on a DVI/HDMI source device. • Off / On DivX ® Video On Demand Shows the registration code authorized for the product. If you connect to the DivX Ⓡ web site and register using that code, you can download the VOD registration f...

Page 151 - Reset System

151 Reset System MENU m → System → Reset System → ENTER E System Reset System - The displayed image may differ depending on the model. This option returns the current settings under system to the default factory settings.

Page 152 - Update now; Auto update

152 Support Software Update MENU m → Support → Software Update → ENTER E The Software Update menu lets you upgrade your product software to the latest version. ― Be careful not to turn off the power until the upgrade is complete. The product will turn off and on automatically after completing the so...

Page 153 - Contact Samsung

153 Contact Samsung MENU m → Support → Contact Samsung → ENTER E View this information when your product does not work properly or when you want to upgrade the software.You can find information regarding our call centres and how to download products and software. ― Contact Samsung and find the produ...

Page 154 - Go to Home

154 Go to Home to play a variety of content from a memory device or a connected network. Player Search or play channels or content saved on devices. Schedule Create content schedules in local channels or edit saved channels. Template To create content, select a template. Clone Product Export the pro...

Page 156 - Reset All

156 This option returns all the current settings for a display to the default factory settings. Reset All MENU m → Support → Reset All → ENTER E Support Reset All - The displayed image may differ depending on the model.

Page 157 - Read the following before using media play with a USB device

157 Playing photos, videos and music (Media Play) Play photos, videos or music saved on a storage device.Play a variety of content using the following methods. • Using a USB device: Play media content such as videos, photos and music from a USB device. • Connecting a storage device: Play media conte...

Page 158 - Compatible devices with media play; File system and formats

158 Compatible devices with media play • Some USB digital cameras, smartphones and audio devices may not be compatible with the product. • Media play is only compatible with USB MSC devices. • MSC device refers to a Mass Storage Class Bulk-Only Transport device. Examples of MSC devices include Thumb...

Page 159 - Using a USB device; Connecting a USB device; Removing a USB device from Source

159 Using a USB device Connecting a USB device 1 Turn on your product. 2 Connect a USB device containing photo, music and/or movie files to the USB port on the back or side panel of the product. 3 The Player page automatically appears as soon as a USB device connects to the product. ― If only one US...

Page 160 - Playing media content from a PC/mobile device; Approving a PC/mobile device connection

160 Playing media content from a PC/mobile device Approving a PC/mobile device connection Play photos, videos or music saved on a PC or mobile device.To play media content from a PC or mobile device on the product, the connection with the PC or mobile device must be approved. ― The media playback fe...

Page 161 - Features provided in the media content list page

161 When connected to a home network (DLNA) Play content saved on a device connected to a home network. ― Playing media content using a non-Samsung DLNA server may result in a compatibility issue. ― Playback of some media content shared with a PC or mobile device may not be possible depending on the...

Page 162 - Menu items in the media content list page

162 Menu items in the media content list page Option Name Operations Photos Videos Music Slide Show Start a slideshow. ― This menu item is not available if Sort by is set to Folder . c Encoding Select an encoding language if the title of media content appears corrupted. c Rename Playlist Rename a pl...

Page 163 - Available buttons and features during photo playback

163 Available buttons and features during photo playback Pressing the E or TOOLS button displays the following buttons. The RETURN button makes the buttons disappear. • Pause / Play Start or stop a slideshow. Using a slideshow, it is possible to play all photos in a folder. • Previous / Next View th...

Page 165 - Available buttons and features during music playback

165 Available buttons and features during music playback • Pause / Play Pause or play music. • Rewind / Fast Forward Rewind or fast forward music. Speed up playback up to 3x, if required. To play the previous music file, select ∂ twice. • Previous / Next To play the previous music file, select  twi...

Page 166 - Supported Subtitle and Media play file formats; Subtitle; External; Supported image resolutions; File Extension

166 Supported Subtitle and Media play file formats Subtitle External Internal • MPEG-4 timed text (.ttxt) • SAMI (.smi) • SubRip (.srt) • SubViewer (.sub) • Micro DVD (.sub or .txt) • SubStation Alpha (.ssa) • Advanced SubStation Alpha (.ass) • Powerdivx (.psb) • XsubContainer: AVI • SubStation Alph...

Page 167 - Supported music file formats; Supported Video Formats

167 Supported music file formats File Extension Type Codec Comments *.mp3 MPEG MPEG1 Audio Layer 3 *.m4a, *.mpa, *.aac, *.3ga MPEG4 AAC *.flac FLAC FLAC The Seek (jump) function is not supported.Supports up to 2 channel Supported Video Formats • Video content will not play, or not play correctly, if...

Page 169 - Troubleshooting Guide; Testing the Product; Checking the Resolution and Frequency

169 Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Centre Before calling Samsung Customer Service Centre, test your product as follows. If the problem persists, contact Samsung Customer Service Centre. Testing the Product Check if your product is operating normally by ...

Page 170 - Check the followings.; Screen issue

170 Check the followings. Installation issue (PC mode) The screen keeps switching on and off. Check the cable connection between the product and PC, and ensure the connection is secure. Blank spaces are found on all four sides of the screen when an HDMI or HDMI-DVI cable is connected to the product ...

Page 172 - Sound issue

172 Screen issue The screen display does not look normal. Encoded video content may cause the display to appear corrupted in scenes featuring fast moving objects such as in a sports event or action video. Low signal level or low picture quality may cause the display to appear corrupted. This does no...

Page 174 - Remote control issue; Source device issue

174 Sound issue There is an echo sound coming from the speakers. Different decoding speeds between the product speakers and external speakers can cause an echo.In this case, set Speaker Settings to External . Remote control issue The remote control does not work. Make sure that the batteries are cor...

Page 175 - Other issue

175 Other issue The product smells like plastic. The plastic smell is normal and disappears over time. The monitor appears tilted. Remove and then attach the stand again to the product. Audio or video cuts out intermittently. Check the cable connection and connect it again if required. Using a very ...

Page 179 - Specifications; Model Name

179 Specifications - Size - Display area H V General Model Name DB32E / DM32E DB40E / DM40E Panel Size 32 CLASS (31.5 inches / 80 cm) 40 CLASS (40.0 inches / 101 cm) Display area 698.4 mm (H) x 392.85 mm ( V )27.50 inches (H) x 15.47 inches ( V ) 885.6 mm (H) x 498.15 mm ( V )34.87 inches (H) x 19.6...

Page 184 - Responsibility for the Pay Service; Others

184 Appendix Responsibility for the Pay Service (Cost to Customers) ― When the service is requested, in spite of in warranty, we may charge you for a visit from a service technician in the following cases. Not a product defect Cleaning of the product, Adjustment, Explanation, Re-installation and etc...

Page 185 - WEEE; Correct disposal of batteries in this product

185 WEEE Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in countries with separate collection systems)This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should...

Page 186 - Optimum Picture Quality and Afterimage; Optimum Picture Quality; Prevention of Afterimage Burn-in

186 Optimum Picture Quality and Afterimage Burn-in Prevention Optimum Picture Quality • Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may be brighter or darker on the panel. This does not affect product performance. - The number of sub-pixels by pan...

Page 187 - Preventing afterimage burn-in; FLIGHT; FLIGHT; FLIGHT

187 Preventing afterimage burn-in ― The best way to protect the product from afterimage burn-in is switching the power off or setting the PC or system to run a screen saver when not in use. Also, Warranty service may be limited depending on instruction guide. • Powering Off, Screen Saver and Power S...

Page 188 - Licence

188 Licence Manufactured under licence from Dolby Laboratories.Dolby and the double-D symbol are trademarks of Dolby Laboratories. Ⓡ Manufactured under a licence from U.S. Patent No’s: 5,956,674, 5,974,380, 5,978,762, 6,487,535, 6,226,616, 7,212,872, 7,003,467, 7,272,567, 7,668,723, 7,392,195, 7,930...

Page 189 - Terminology

189 Terminology 480i / 480p / 720p / 1080i / 1080p ____ Each of the scanning rates above refers to the number of effective scanning lines that decides the screen resolution. The scanning rate may be indicated in i (interlaced) or p (progressive), depending on the scanning method.- ScanningScanning r...

Samsung DM65E - User Manual

Table of Contents:

Other Manuals for Samsung DM65E

Summary

Other Samsung Professional Displays Models