Page 2 - Table of contents
Table of contents Before Using the Product Copyright 6 Safety Precautions 7 Symbols 7Cleaning 7Storage 8Electricity and Safety 8 Installation 9Operation 11 Preparations Checking the Components 14 Components 14 Parts 15 Control Panel 15 Reverse Side 17 Reverse Side 18 Anti-theft Lock 19 Remote Contro...
Page 3 - Sound Adjustment
Table of contents Advanced Settings 58 Dynamic Contrast 59Black Tone 59Flesh Tone 59RGB Only Mode 59Colour Space 59White Balance 59Motion Lighting 59 Picture Options 60 Colour Tone 61Colour Temp. 61Digital Clean View 61MPEG Noise Filter 61HDMI Black Level 62Film Mode 62Motion Plus 62Dynamic Backligh...
Page 4 - Support
Table of contents Vertical 90Screen Position 90 Source AutoSwitch Settings 91 Source AutoSwitch 91Primary Source Recovery 91Primary Source 91Secondary Source 91 Change PIN 92 General 93 Max. Power Saving 93Game Mode 93Auto Power On 93Safety Lock 93Button Lock 94Standby Control 94HDBT Standby 94Remot...
Page 5 - Appendix
Table of contents Appendix Responsibility for the Pay Service (Cost to Customers) 127 Not a product defect 127 A Product damage caused by customer's fault 127Others 127 Optimum Picture Quality and Afterimage Burn-in Prevention 128 Optimum Picture Quality 128 Prevention of Afterimage Burn-in 128 Lice...
Page 6 - Before Using the Product; Copyright
6 Before Using the Product Chapter 01 Copyright The contents of this manual are subject to change without notice to improve quality. © 2016 Samsung Samsung owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung is prohibited. ...
Page 7 - Safety Precautions; Caution; Symbols; Warning; Cleaning
7 Safety Precautions Caution RISK OF ELECTRIC SHOCK DO NOT OPENCaution : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. (OR BACK)THERE ARE NO USER SERVICEABLE PARTS INSIDE.REFER ALL SERVICING TO QUALIFIED PERSONNEL. This symbol indicates that high voltage is present inside.It is dangerou...
Page 9 - Installation
9 Caution Do not disconnect the power cord while the product is being used. • The product may become damaged by an electric shock. ! Only use the power cord provided with your product by Samsung. Do not use the power cord with other products. • A fire or electric shock may result. ! Keep the power s...
Page 11 - Operation
11 Operation Warning There is a high voltage inside the product. Never disassemble, repair or modify the product yourself. • A fire or electric shock may result. • Contact Samsung Customer Service Centre for repairs. ! Before moving the product, turn off the power switch and disconnect the power cab...
Page 14 - Preparations; Checking the Components; Components
14 Preparations Chapter 02 Checking the Components - Contact the vendor where you purchased the product if any components are missing. - The pictures may look different from the actual components. - A stand is not provided with the product. To install a stand, you can purchase one separately. - The ...
Page 15 - Parts; Control Panel; Buttons
15 Parts Control Panel DC32E DC32E-M Panel Key Speaker Speaker Spacer logo Remote sensor ― The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Buttons Description Power on the product. If you press the button when the p...
Page 16 - Control menu; Return
16 ― If you press the button on the panel key when the product is turned on, the control menu will be displayed. Control menu EDE / EME Return DCE / DCE-M / DCE-H Return Buttons Description Source Select the connected input source. Move the panel key right to select Source in the control menu. When ...
Page 17 - Reverse Side; Port
17 Reverse Side ― The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. ― EDE, EME models are only supported. DVI IN / MAGICINFO IN HDMI IN USB (5V, 1.5A) HDBT IN RGB IN RS232C IN RS232C OUT AUDIO OUT RGB / DVI / HDMI / A...
Page 20 - Remote Control; VOL; CH
20 - Remote control button functions may differ for different products. Remote Control ― Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled. ― A button without a description in the image below is not ...
Page 21 - To place batteries in the remote control
21 TOOLS INFO SET UNSET LOCK PC A DVI B HDMI C DP D EXIT RETURN IR control Display information about the current input source. Move to the upper, lower, left or right menu, or adjust an option's setting.Confirm a menu selection. Exit the current menu. Manually select a connected input source from PC...
Page 22 - Before Installing the Product; Switching between portrait and landscape; Ventilation; Installation on a Perpendicular Wall
22 Before Installing the Product (Installation Guide) To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. • Ensure that an authorized installation company installs the wall mount. • Otherwise, it may fall and cause personal ...
Page 23 - Installation on an Indented Wall; Plane view; Installing the Wall Mount; Preparing before installing Wall-Mount
23 A B C E Figure 1.3 Side view D D Figure 1.2 Side view Installation on an Indented Wall ― Contact Samsung Customer Service Centre for further details. Plane view A Minimum 40 mm B Minimum 70 mm C Minimum 50 mm D Minimum 50 mm E Ambient temperature: Under 35 C ― When installing the product on an in...
Page 24 - Model name
24 Wall Mount Kit Specifications (VESA) ― Install your wall mount on a solid wall perpendicular to the floor. Before attaching the wall mount to surfaces other than plaster board, please contact your nearest dealer for additional information.If you install the product on a slanted wall, it may fall ...
Page 25 - Cable Connection; Pin
25 Remote Control (RS232C) Cable Connection RS232C Cable Interface RS232C (9 pins) Pin TxD (No.2), RxD (No.3), GND (No.5) Bit rate 9600 bps Data bits 8 bit Parity None Stop bit 1 bit Flow control None Maximum length 15 m (only shielded type) • Pin assignment 1 2 3 4 5 6 7 8 9 5 4 3 2 1 9 8 7 6 <M...
Page 26 - Pin No
26 • RS232C cableConnector: 9-Pin D-Sub to Stereo Cable 5 1 6 9 -P2- 1 2 3 -P1- -P1- -P1- -P2- -P2- Male type RxTxGnd 325 ------------------------------ 213 TxRxGnd STEREOPLUG(3.5ø) LAN Cable (DCE, DCE-M, DCE-H Model Only) • Pin assignment 1 2 3 4 5 6 7 8 Pin No Standard Colour Signal 1 White and or...
Page 28 - Connection
28 Connection ― Ensure you connect each of the adapters to the correct RS232C IN or OUT port on the product. • Connection 1 (EDE / EME Model) RS232C IN OUT RS232C IN OUT RS232C IN OUT RS232C IN OUT • Connection 2 (DCE / DCE-M / DCE-H Model) RJ45 RJ45 • Connection 3 (DCE / DCE-M / DCE-H Model) RS232C...
Page 29 - Control Codes; Viewing control state (Get control command)
29 Control Codes Viewing control state (Get control command) Header Command ID Data length Checksum 0xAA Command type 0 Controlling (Set control command) Header Command ID Data length Data Checksum 0xAA Command type 1 Value Command No. Command type Command Value range 1 Power control 0x11 0~1 2 Volu...
Page 30 - Power control; Volume control
30 Power control • FunctionA product can be powered on and off using a PC. • Viewing power state (Get Power ON / OFF Status) Header Command ID Data length Checksum 0xAA 0x11 0 • Setting power ON/Off (Set Power ON / OFF) Header Command ID Data length Data Checksum 0xAA 0x11 1 "Power" "Pow...
Page 31 - Input source control
31 Input source control • FunctionThe input source of a product can be changed using a PC. • Viewing input source state (Get Input Source Status) Header Command ID Data length Checksum 0xAA 0x14 0 • Setting the input source (Set Input Source) Header Command ID Data length Data Checksum 0xAA 0x14 1 &...
Page 32 - Screen mode control; Screen size control
32 Screen mode control • FunctionThe screen mode of a product can be changed using a PC.Screen mode cannot be controlled when the Video Wall function is enabled. ― This control can only be used on models that include a TV. • Viewing screen status (Get Screen Mode Status) Header Command ID Data lengt...
Page 33 - Auto adjustment control (PC and BNC only)
33 PIP On/Off control • FunctionThe PIP mode of a product can be turned on or off using a PC. ― Only available on models that have the PIP function. ― The mode cannot be controlled if Video Wall is set to On . ― This function is not available in MagicInfo . • Viewing PIP on/off state (Get the PIP ON...
Page 34 - Video Wall Mode Control
34 Video Wall Mode Control • Function Video Wall mode can be activated on a product using a PC. This control is only available on a product whose Video Wall is enabled. • Viewing video wall mode (Get Video Wall Mode) Header Command ID Data length Checksum 0xAA 0x5C 0 • Setting the video wall (Set Vi...
Page 38 - Connecting and Using a Source Device; Before Connecting; Pre-connection Checkpoints; Connecting to a PC
38 Connecting and Using a Source Device Chapter 03 Before Connecting Check the following before you connect this product with other devices. Devices that can be connected to this product include PCs, camcorders, speakers, set top boxes and DVD/Blu-ray Disc players. Pre-connection Checkpoints ― Befor...
Page 39 - Connection using a DVI cable (Digital type); Connection Using an HDMI-DVI Cable
39 Connection using a DVI cable (Digital type) DVI IN / MAGICINFO IN RGB / DVI / HDMI / AV / COMPONENT / AUDIO IN or AUDIO IN ― You can use the DVI port on the product as an HDMI port by using a DVI-HDMI adapter. DVI IN / MAGICINFO IN HDMI Connection Using an HDMI-DVI Cable ― When you connect a PC t...
Page 40 - Connection Using an HDMI Cable
Page 41 - Connecting to a Video Device; Connection Using the AV Cable; Connection Using the component Cable
41 Connecting to a Video Device • Do not connect the power cable before connecting all other cables.Ensure you connect a source device first before connecting the power cable. • You can connect a video device to the product using a cable. ― Connecting parts may differ in different products. ― Press ...
Page 43 - Using an HDMI cable or HDMI to DVI Cable (up to 1080p); Connecting to an Audio System
43 Connection Using an HDMI Cable Using an HDMI cable or HDMI to DVI Cable (up to 1080p) • For better picture and audio quality, connect to a digital device using an HDMI cable. • An HDMI cable supports digital video and audio signals, and does not require an audio cable. - To connect the product to...
Page 44 - Connecting the LAN Cable
44 Connecting the LAN Cable ― DCE, DCE-M, DCE-H models are only supported. ― Connecting parts may differ in different products. RJ45 • Use Cat7(*STP Type) cable for the connection. *Shielded Twist Pair
Page 45 - Connecting the HDBase-T; LAN Cable
45 Connecting the HDBase-T ― EME models are only supported. ― Connecting parts may differ in different products. ― HDBase-T ( Tx) transmits data from an external device to HDBase-T (Rx). Make sure to connect them directly using a LAN cable. ― Data transmission is not available if HDBase-T (Rx) is co...
Page 46 - Changing the Input source; Source
46 Changing the Input source Source MENU m → Applications → Source List → ENTER E Source HDMI HDMI-CEC DVD Player AV PC Component DVI - The displayed image may differ depending on the model. Source allows you to select a variety of sources and change source device names. You can display the screen o...
Page 47 - Using MDC; MDC Programme Installation/Uninstallation; Uninstallation
47 Using MDC MDC Programme Installation/Uninstallation Installation ― MDC installation can be affected by the graphics card, mother board and network conditions. 1 Click the MDC Unified installation programme. 2 Select a language for installation. Next, click " OK ". 3 When the " Welcome...
Page 48 - Connecting to MDC
48 Connecting to MDC Using MDC via RS-232C (serial data communications standards) An RS-232C serial cable must be connected to the serial ports on the PC and monitor. ― EDE, EME models are only supported. RS232C IN RS232C OUT Monitor 1 Monitor 2 Computer
Page 49 - Using MDC via Ethernet; Connection using a direct LAN cable
49 Using MDC via Ethernet Enter the IP for the primary display device and connect the device to the PC. Display devices can be connected to each other using a LAN cable. Connection using a direct LAN cable ― Multiple products can be connected using the RJ45 port on the product and the LAN ports on t...
Page 50 - Screen Adjustment; Picture Mode; Picture; Backlight
50 Screen Adjustment Configure the Picture settings ( Backlight , Colour Tone , etc.). The layout of the Picture menu options may vary depending on the product. Chapter 05 Picture Mode MENU m → Picture → Picture Mode → ENTER E 100 100 45 50 50 50 50 · · · · · · Picture Backlight Contrast Brightness ...
Page 51 - Input source; Gamma
51 Backlight / Contrast / Brightness / Sharpness / Colour / Tint (G/R) MENU m → Picture → ENTER E 100 100 45 50 50 50 50 · · · · · · Picture Backlight Contrast Brightness Sharpness Colour Tint (G/R) 100 100 45 50 50 50 Picture Mode Information G50 R - The displayed image may differ depending on the ...
Page 52 - Calibrated value
52 Calibrated value MENU m → Picture → Calibrated value → ENTER E Picture Calibrated value Don't apply - The displayed image may differ depending on the model. Select whether to apply the brightness, colour, gamma and uniformity settings customized using the colour calibration programme Advanced Col...
Page 53 - Picture Size; Picture Size; Position
53 Picture Size If you have a cable box or satellite receiver, it may have its own set of screen sizes as well. However, we highly recommend you use your product’s 16:9 mode most of the time. ― Different screen adjustment options are displayed depending on the current input source. • 16:9 : Sets the...
Page 55 - Resolution Select; Auto Adjustment
55 Resolution Select · Picture Size Position Resolution Select Picture Size Off 16:9 - Available in PC mode only. - The displayed image may differ depending on the model. If the picture is not normal even when the resolution of the graphics card is one of the following, you can optimize the picture ...
Page 56 - PC Screen Adjustment; Fine
56 PC Screen Adjustment MENU m → Picture → PC Screen Adjustment → ENTER E PC Screen Adjustment Fine Position Image Reset Coarse 0 50 - Available in PC mode only. - The displayed image may differ depending on the model. • Coarse / Fine Removes or reduces picture noise.If the noise is not removed by F...
Page 57 - PIP; PIP Settings; Main picture
57 PIP MENU m → Picture → PIP → ENTER E Picture PIP - The displayed image may differ depending on the model. - For PIP sound, refer to the Sound Select instructions. - If you turn the product off while watching in the PIP mode, the PIP function is reset to off. When you turn your product on, you mus...
Page 58 - Advanced Settings; Dynamic Contrast; Input Source
58 Advanced Settings MENU m → Picture → Advanced Settings → ENTER E Advanced Settings Black Tone Flesh Tone RGB Only Mode Colour Space White Balance Motion Lighting Dynamic Contrast Off 0 Off Native Off Medium - The displayed image may differ depending on the model. Input Source Picture Mode Advance...
Page 60 - Picture Options; Colour Tone
60 Picture Options MENU m → Picture → Picture Options → ENTER E Picture Options Colour Temp. Digital Clean View MPEG Noise Filter HDMI Black Level Film Mode Motion Plus Colour Tone 10000K Off Off Normal Off Off Standard - The displayed image may differ depending on the model. - Motion Plus is only a...
Page 63 - Picture Off; Reset Picture; Picture Off
63 Picture Off MENU m → Picture → Picture Off → ENTER E Picture Picture Off Reset Picture - The displayed image may differ depending on the model. The product screen is turned off but the audio will continue. Press any key on your remote to turn the screen back on. Reset Picture MENU m → Picture → R...
Page 64 - Sound Mode; Sound; Sound Effect
64 Sound Adjustment Configure the sound ( Sound ) settings for the product. Chapter 06 Sound Mode MENU m → Sound → Sound Mode → ENTER E Sound Sound Effect Speaker Settings Reset Sound Sound Mode Standard - The displayed image may differ depending on the model. You can select a sound mode to suit you...
Page 66 - Speaker Settings; Reset Sound
66 Speaker Settings MENU m → Sound → Speaker Settings → ENTER E Sound Sound Effect Speaker Settings Reset Sound Sound Mode Standard - The displayed image may differ depending on the model. • Speaker Select ( External / Internal / Receiver ) If you are listening to the sound track of a broadcast or m...
Page 67 - Network Status; Network Settings; Network type
67 Network Chapter 07 Network Status MENU m → Network → Network Status → ENTER E You can check the current network and Internet status. Network Settings MENU m → Network → Network Settings → ENTER E Configure network settings to use various smart hub features such as Internet search, content sharing...
Page 68 - Connecting to a Wired Network
68 Network Settings (Wired) Connecting to a Wired Network There are three ways to attach your product to your LAN using cable. • You can attach your product to your LAN by connecting the LAN port on the back of your product to an external modem using a LAN cable.See the diagram below. RJ45 The Modem...
Page 69 - How to set up automatically; Getting the Network Connection Values; How to set up manually
69 Set the network connection to use Internet services such as perform software upgrades. Automatic Network Settings (Wired) Connect to the network using a LAN cable.Make sure a LAN cable is connected first. How to set up automatically 1 Set Network type to Wired from the Network Settings page. 2 Pr...
Page 70 - Connecting to a Wireless Network
70 Network Setting (Wireless) Connecting to a Wireless Network The LAN Port on the Wall Wireless IP sharer (router having DHCP server) LAN Cable USB Samsung Wireless LAN Adapter (sold separately) Samsung recommends using IEEE 802.11n. When you play video over a network connection, the video may not ...
Page 73 - To connect your mobile device with your product using Wi-Fi; AllShare Settings; Using the AllShare Play Function
73 Wi-Fi Direct MENU m → Network → Wi-Fi Direct → ENTER E ― To use this function, your mobile device should be supported by the Wi-Fi Direct . Set to connect the product to wireless mobile devices. Using this function, you can connect wireless mobile devices with your product directly without a rout...
Page 74 - Server Network Settings; Connect to server; Server Access; FTP Mode; Device Name
74 Server Network Settings MENU m → Network → Server Network Settings → ENTER E Connect to server To run Player connect to a network. • Server Address / SSL / Port ― If the SSL option is enabled, the server is configured to use https and data transfer is encrypted. ― Enter the server IP address and ...
Page 75 - Source List; Source List; Refresh; Information
75 Applications Chapter 08 Source List Source allows you to select a variety of sources and change source device names. You can display the screen of a source device connected to the product. Select a source from Source List to display the screen of the selected source. ― The input source can also b...
Page 76 - MagicInfo Lite; Playing content from the internal memory or USB
76 MagicInfo Lite MENU m → Applications → MagicInfo Lite → ENTER E Applications MagicInfo Lite Source List - The displayed image may differ depending on the model. MagicInfo is a business solution that allows the product to be used as a signage (advertising media). Using the solution, play image and...
Page 77 - Network Channel; Available features in the MagicInfo page; Options menu items in the MagicInfo screen; Option Name
77 Device : All Content : All Sort by : File Name Options - The displayed image may differ depending on the model. Network Channel Play content, templates and schedules configured on the server. • You can view whether the server is connected (approval) in the Player menu screen.To view whether the s...
Page 78 - Settings
78 Settings Settings Default Storage Repeat Mode Picture Size Display Duration Safely Remove USB Device Reset Settings Internal One Select the storage location that you want to download scheduled channels from the network to. Close - The displayed image may differ depending on the model. Default Sto...
Page 79 - Setup; Setup
79 System Chapter 09 Setup MENU m → System → Setup → ENTER E English Off System Menu Language Multi Control Time Eco Solution Auto Protection Time Screen Burn Protection Setup - The displayed image may differ depending on the model. Go through the initial setup steps like you did the first time you ...
Page 80 - Menu Language; Multi Control; Configuring settings for Multi Control
80 Menu Language MENU m → System → Menu Language → ENTER E Set the menu language. ― A change to the language setting will only be applied to the onscreen menu display. It will not be applied to other functions on your PC. Multi Control MENU m → System → Multi Control → ENTER E Configuring settings f...
Page 81 - Time; Sleep Timer; Clock Set
81 Time MENU m → System → Time → ENTER E Off Time Sleep Timer On Timer Off Timer Holiday Management Clock Set - The displayed image may differ depending on the model. You can configure Clock Set or Sleep Timer . You can also set the product to automatically turn on or off at a specified time using t...
Page 82 - Off Timer; Holiday Management
82 Off Timer Set the off timer ( Off Timer ) by making a selection from one of the seven options. ( Off Timer 1 ~ Off Timer 7 ) ― You must set the clock before you can use Off Timer . • Setup : Select Off , Once , Everyday , Mon~Fri , Mon~Sat , Sat~Sun or Manual . If you select Manual , you can choo...
Page 83 - Eco Solution; Eco Sensor; Energy Saving
83 Eco Solution MENU m → System → Eco Solution → ENTER E Off 15 min Off Eco Solution Eco Sensor No Signal Power Off Auto Power Off Energy Saving Off - The displayed image may differ depending on the model. Energy Saving Reduce the power consumption by adjusting the screen brightness. • Off / Low / M...
Page 84 - Auto Protection Time
84 Auto Protection Time MENU m → System → Auto Protection Time → ENTER E System Auto Protection Time Off - The displayed image may differ depending on the model. If the screen displays a still image for a certain period of time you define, the product activates the screen saver to prevent the format...
Page 85 - Screen Burn Protection; Pixel Shift; Pixel Shift; Available Pixel Shift Settings and Optimum Settings.; Available Settings
85 Screen Burn Protection MENU m → System → Screen Burn Protection → ENTER E Screen Burn Protection Timer Immediate display Side Grey Pixel Shift Off Off Off Off - The displayed image may differ depending on the model. To reduce the possibility of screen burn, this unit is equipped with Pixel Shift ...
Page 86 - Timer; Timer
86 Screen Burn Protection Timer Immediate display Side Grey Pixel Shift Off Off Off Off - The displayed image may differ depending on the model. Timer You can set the timer for Screen Burn Protection . The Screen Burn Protection feature stops automatically after a specified period of time. Timer • O...
Page 87 - Immediate display; Side Grey
87 Screen Burn Protection Timer Immediate display Side Grey Pixel Shift Off Off Off Off - The displayed image may differ depending on the model. Immediate display Select the screen saver you want to display immediately. • Off / Pixel / Rolling bar / Fading screen Side Grey When the screen is set to ...
Page 88 - Ticker
88 Ticker MENU m → System → Ticker → ENTER E System Ticker Off - The displayed image may differ depending on the model. - The Ticker function is only available when Menu Language is set to English . Input text while a video or image is displayed and display the text on the screen. • Off / On ― Messa...
Page 89 - Full; Format; Horizontal
89 Video Wall MENU m → System → Video Wall → ENTER E · · · · Video Wall Full 1 1 Format Horizontal Vertical Screen Position Video Wall On - The displayed image may differ depending on the model. - Some models may not support the MagicInfo function. - The Video Wall option is only enabled when PIP is...
Page 90 - Vertical
90 · · · · Video Wall Full 1 1 Format Horizontal Vertical Screen Position Video Wall On - The displayed image may differ depending on the model. Vertical This function automatically divides the screen according to the specified number of vertical displays.Enter the number of vertically arranged disp...
Page 91 - Source AutoSwitch Settings; Source AutoSwitch; Primary Source
91 Source AutoSwitch Settings MENU m → System → Source AutoSwitch Settings → ENTER E · · · Source AutoSwitch Settings Off All PC Primary Source Recovery Primary Source Secondary Source Source AutoSwitch On - The displayed image may differ depending on the model. Turning on the display with Source Au...
Page 93 - General; Game Mode
93 General MENU m → System → General → ENTER E Off Off Off Off Off Off General Game Mode Auto Power On Safety Lock Button Lock Standby Control Remote Configuration Max. Power Saving On - The displayed image may differ depending on the model. Max. Power Saving Turns off the product to reduce power co...
Page 94 - Button Lock; HDBT Standby; Remote Configuration
94 Off Off Off Off Off Off Off General Game Mode Auto Power On Safety Lock Button Lock Standby Control HDBT Standby Remote Configuration Max. Power Saving On - The displayed image may differ depending on the model. Button Lock This menu can be used to lock the buttons on the product. Only the remote...
Page 95 - Lamp Schedule; OSD Display; Power On Adjustment
95 General OSD Display Power On Adjustment Temperature Control 0 Sec 77 Off Lamp Schedule - The displayed image may differ depending on the model. Lamp Schedule Adjusts the luminance to a user-specified value at a specified time. • Off / On OSD Display Displays or hides a menu item on the screen. • ...
Page 96 - Auto Turn Off; Description
96 Anynet+ (HDMI-CEC) MENU m → System → Anynet+ (HDMI-CEC) → ENTER E Anynet+ (HDMI-CEC) Auto Turn Off Anynet+ (HDMI-CEC) Yes On - The displayed image may differ depending on the model. - The Anynet+ functions do not operate with other manufacturers’ products. - For instructions explaining how to con...
Page 97 - Switching between Anynet+ Devices
97 Anynet+ (HDMI-CEC) Auto Turn Off Anynet+ (HDMI-CEC) Yes On - The displayed image may differ depending on the model. Auto Turn Off Setting an Anynet+ Device to turn Off automatically when the product is turned off. • No / Yes ― If Auto Turn Off is set to Yes , running external devices will turn of...
Page 98 - Troubleshooting for Anynet+; Problem
98 Troubleshooting for Anynet+ Problem Possible Solution Anynet+ does not work. • Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. • You can connect only one receiver (home theatre). • Check if the Anynet+ device power cord is properly connected. • Check th...
Page 100 - Reset System; Clone Product; Clone from USB
100 Reset System MENU m → System → Reset System → ENTER E System Reset System - The displayed image may differ depending on the model. This option returns the current settings under system to the default factory settings. Clone Product MENU m → System → Clone Product → ENTER E Clone Product Clone fr...
Page 101 - Reset All; PC module power
101 Reset All MENU m → System → Reset All → ENTER E This option returns all the current settings for a display to the default factory settings. PC module power MENU m → System → PC module power → ENTER E The PC module can be turned on/off separately from the LFD. Synced power-on Set to Off to turn o...
Page 102 - Software Update; Update now; Contact Samsung
102 Support Chapter 10 Software Update MENU m → Support → Software Update → ENTER E The Software Update menu lets you upgrade your product software to the latest version. ― Be careful not to turn off the power until the upgrade is complete. The product will turn off and on automatically after comple...
Page 103 - Read the following before using media play with a USB device
103 Play photos, videos or music saved on a storage device.Play a variety of content using the following methods. • Using a USB device: Play media content such as videos, photos and music from a USB device. • Connecting a storage device: Play media content saved on a storage device such as a smartph...
Page 104 - Compatible devices with media play; File system and formats
104 Compatible devices with media play • Some USB digital cameras, smartphones and audio devices may not be compatible with the product. • Media play is only compatible with USB MSC devices. • MSC device refers to a Mass Storage Class Bulk-Only Transport device. Examples of MSC devices include Thumb...
Page 105 - Using a USB device; Connecting a USB device; Removing a USB device from Source
105 Using a USB device Connecting a USB device 1 Turn on your product. 2 Connect a USB device containing photo, music and/or movie files to the USB port on the back or side panel of the product. 3 The New device connected. page automatically appears as soon as a USB device connects to the product. ―...
Page 106 - Menu items in the media content list page
106 Menu items in the media content list page Option Name Operations Photos Videos Music Slide Show Start a slideshow. ― This menu item is not available if Sort by is set to Folder . c Encoding Select an encoding language if the title of media content appears corrupted. c Play Selected Select and pl...
Page 107 - Available buttons and features during photo playback
107 Available buttons and features during photo playback Pressing the E or TOOLS button displays the following buttons. The RETURN button makes the buttons disappear. • Previous / Next View the previous or next photo. • Start Slide Show / Stop Slide Show Start or stop a slideshow. Using a slideshow,...
Page 109 - Available buttons and features during music playback
109 Available buttons and features during music playback Pressing the E or TOOLS button displays the following buttons. The RETURN button makes the buttons disappear. • Pause / Play Pause or play music. • Rewind / Fast Forward Rewind or fast forward music. Speed up playback up to 3x, if required. To...
Page 110 - Supported Subtitle and Media play file formats; Subtitle; External; Compatible image file format; Type
110 Supported Subtitle and Media play file formats Subtitle External Internal • MPEG-4 timed text (.ttxt) • SAMI (.smi) • SubRip (.srt) • SubViewer (.sub) • Micro DVD (.sub or .txt) • SubStation Alpha (.ssa) • Advanced SubStation Alpha (.ass) • XsubContainer: AVI • SubStation AlphaContainer: MKV • A...
Page 111 - Supported music file formats; File Extension; Supported Video Formats; Video Decoder
111 Supported music file formats File Extension *.avi, *.mkv, *.asf, *.wmv, *.mp4, *.3gp, *.vro, *.mpg,*.mpeg, *.ts, *.tp, *.trp, *.mov, *.flv, *.vob, *.svi Supported Video Formats • Video content will not play, or not play correctly, if there is an error in the content or the container. • Sound or ...
Page 114 - Troubleshooting Guide; Testing the Product; Checking the Resolution and Frequency
114 Troubleshooting Guide Chapter 12 Requirements Before Contacting Samsung Customer Service Centre Before calling Samsung Customer Service Centre, test your product as follows. If the problem persists, contact Samsung Customer Service Centre. Testing the Product Check if your product is operating n...
Page 115 - Check the followings.; Screen issue
115 Check the followings. Installation issue (PC mode) The screen keeps switching on and off. Check the cable connection between the product and PC, and ensure the connection is secure. Blank spaces are found on all four sides of the screen when an HDMI or HDMI-DVI cable is connected to the product ...
Page 118 - Sound issue
118 Sound issue There is no sound. Check the connection of the audio cable or adjust the volume. Check the volume. The volume is too low. Adjust the volume. If the volume is still low after turning it up to the maximum level, adjust the volume on your PC sound card or software programme. Video is av...
Page 119 - Remote control issue; Source device issue
119 Sound issue There is audible sound when the volume is muted. When Speaker Select is set to External , the volume button and mute function are disabled. Adjust the volume for the external speakers. Audio settings for main speakers are separate from the internal speakers on the product.Changing or...
Page 120 - Other issue
120 Other issue Small particles are found on the edges of the product. The particles are part of the product design. The product is not defective. The PIP menu is not available. The menu is enabled or disabled depending on the Source mode. When I try to change the PC resolution, a message " The ...
Page 123 - Specifications; Model Name
123 Specifications Chapter 13 - Size - Display area H V General Model Name ED65E / EM65E ED75E / EM75E Panel Size 65 CLASS (64.5 inches / 163 cm) 75 CLASS (74.5 inches / 189 cm) Display area 1428.48 mm (H) x 803.52 mm ( V )56.2 inches (H) x 31.6 inches ( V ) 1650.24 mm (H) x 928.26 mm ( V )65.0 inch...
Page 125 - Resolution
125 - Horizontal FrequencyThe time required to scan a single line from the left to the right side of the screen is called a horizontal cycle. The reciprocal number of a horizontal cycle is called horizontal frequency. Horizontal frequency is measured in kHz. - Vertical FrequencyThe product displays ...
Page 127 - Responsibility for the Pay Service; Others
127 Appendix Responsibility for the Pay Service (Cost to Customers) ― When the service is requested, in spite of in warranty, we may charge you for a visit from a service technician in the following cases. Not a product defect Cleaning of the product, Adjustment, Explanation, Re-installation and etc...
Page 128 - Optimum Picture Quality and Afterimage; Optimum Picture Quality; Prevention of Afterimage Burn-in
128 Optimum Picture Quality and Afterimage Burn-in Prevention Optimum Picture Quality • Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may be brighter or darker on the panel. This does not affect product performance. - The number of sub-pixels by pan...
Page 129 - Preventing afterimage burn-in; FLIGHT; FLIGHT; FLIGHT
129 Preventing afterimage burn-in ― The best way to protect the product from afterimage burn-in is switching the power off or setting the PC or system to run a screen saver when not in use. Also, Warranty service may be limited depending on instruction guide. • Powering Off, Screen Saver and Power S...
Page 130 - Licence
130 Licence Manufactured under license from Dolby Laboratories.Dolby, Dolby Audio and the double-D symbol are trademarks of Dolby Laboratories. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United ...
Page 131 - Terminology
131 Terminology 480i / 480p / 720p / 1080i / 1080p ____ Each of the scanning rates above refers to the number of effective scanning lines that decides the screen resolution. The scanning rate may be indicated in i (interlaced) or p (progressive), depending on the scanning method.- ScanningScanning r...
