Page 2 - Table of contents
2 Table of contents Before Using the Product Securing the Installation Space 4 Precautions for storage 4 Safety Precautions 4 Cleaning 5Electricity and Safety 5 Installation 6Operation 7 Preparations Parts 9 Control Panel 9 Function Key Guide 10 Game Setting Key 11 Changing Brightness, Contrast and ...
Page 3 - Setup and Reset; Specifications
3 Table of contents Setup and Reset Lighting 38 Local Dimming 38 Volume 38 Eco Saving Plus 39 Off Timer 39 PC/AV Mode 39 USB Super Charging 39 DisplayPort Ver. 40 HDMI Mode 40 Source Detection 40 Key Repeat Time 40 Power LED On 40 Reset All 40 Information 41 Installing the Software Easy Setting Box ...
Page 4 - Securing the Installation Space; Precautions for storage; Safety Precautions; Warning; Before Using the Product
4 Securing the Installation Space Ensure some space around the product for ventilation. An internal temperature rise may cause fire and damage the product. Be sure to allow the amount of space as shown below or greater when installing the product. ― The exterior may differ depending on the product. ...
Page 5 - Cleaning; Electricity and Safety
5 Cleaning ― Take the following steps when cleaning. 1 Power off the product and computer. 2 Disconnect the power cord from the product. ― Hold the power cable by the plug and do not touch the cable with wet hands. Otherwise, an electric shock may result. 3 Wipe the monitor with a clean, soft and dr...
Page 6 - Installation
6 Warning • DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES. • Do not install the product in poorly ventilated spaces such as a bookcase or closet. • Install the product at least 10cm away from the wall to allow ventilation. •...
Page 7 - Operation
7 Warning • There is a high voltage inside the product. Never disassemble, repair or modify the product yourself. ‒ Contact Samsung Customer Service Center for repairs. • To move the product, first disconnect all the cables from it, including the power cable. • If the product generates abnormal soun...
Page 8 - Caution
8 Caution • Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels. ‒ Activate power-saving mode or a moving-picture screen saver if you will not be using the product for an extended period of time. • Disconnect the power cord f...
Page 9 - Preparations; Control Panel
9 Preparations Chapter 02 Parts Control Panel ― The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Function Key Guide Power LED LEFT JOG Button RIGHT DOWN UP PRESS(ENTER) Return Game Setting Key Parts Description JOG Bu...
Page 11 - Game Setting Key
11 When the monitor displays nothing (i.e. Power saving mode or Non-signal mode), 2 direct keys for control source and power could be used as below. JOG Button Power saving/Non-signal mode UP Source Change Down PRESS(ENTER) for 2 seconds Power Off When the monitor displays the Main menu the JOG Butt...
Page 12 - Changing Brightness, Contrast and Sharpness settings; Brightness; Changing the Volume setting; Volume
12 Changing Brightness, Contrast and Sharpness settings You can adjust Brightness , Contrast or Sharpness by moving the JOG button up or down, if no OSD menu is displayed. Brightness Contrast Sharpness 100 ― The displayed image may differ depending on the model. ― The default brightness can vary dep...
Page 13 - Reverse Side
13 Reverse Side ― The functions available may vary depending on the product model. The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Refer to the actual product. Port Description HDMI IN 1 HDMI IN 2 Connects to a sourc...
Page 14 - Upgrading the Software via USB; Power Off
14 Upgrading the Software via USB 1 Be sure to insert the USB disk into the USB 1 port. You can upgrade the software via USB only if either the monitor screen operates normally or the check signal is displayed on the monitor screen. USB 1 (PC IN) HDMI IN 1 HDMI IN 2 DP IN /SERVICE MIC IN MIC OUT 1 2...
Page 15 - Note
15 Note 1 The supported USB disk formats are FAT, FAT32, and NTFS. 2 For the CHG70 model, make sure that each upgrade file is a BIN format file, follows the CHG70 model naming rule (m-HG7**CCAA-****.*[4 digits].bin, where ** is the display size in inch, ****.* is a version number, and 4 digits are a...
Page 16 - Adjusting the Product Tilt and Height
16 Adjusting the Product Tilt and Height ― The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. 15.0° to Left ~ 15.0° to Right (Total 30.0°, ±2.0°) -2.0° (±2.0°) ~ 92.0° (±2.0°) -5.0° (±2.0°) ~ 15.0° (±2.0°) 145.0 mm (±5....
Page 17 - Rotating the Monitor Screen
17 Rotating the Monitor Screen ― The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. You can rotate your monitor as shown below. 1 2 3 4 5 6 ― Adjust the screen following the arrow direction. ― Rotate the screen in clock...
Page 18 - Precautions for moving the monitor
18 Anti-theft Lock ― An anti-theft lock allows you to use the product securely even in public places. ― The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details. To lock an anti-theft locking device: 1 Fi...
Page 19 - Attaching the Stand
19 Installation Attaching the Stand ― Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. : The product is curved. Placing pressure on the product when on a flat surface may damage the product. When the product is on the ground f...
Page 20 - Removing the Stand (For Attaching the BRACKET WALL)
20 Removing the Stand (For Attaching the BRACKET WALL) ― Before removing the stand from the monitor, place the monitor on a flat and stable surface with the screen facing down. : The product is curved. Placing pressure on the product when on a flat surface may damage the product. When the product is...
Page 21 - Attaching the BRACKET WALL
21 Attaching the BRACKET WALL ― Power the product off and remove the power cable from the power socket. 1 2 4 3 A Attach the BRACKET WALL here B BRACKET WALL Align B with A on the monitor, then tightly fasten with the screws removed from the stand ( P.20 ). • Notes ‒ Using a screw longer than the st...
Page 22 - Connecting and Using a Source Device; Pre-connection Checkpoints; Connection Using the HDMI Cable
22 Connecting and Using a Source Device Chapter 03 Pre-connection Checkpoints ― Before connecting a source device, read the user manual provided with it.The number and locations of ports on source devices may differ from device to device. ― Do not connect the power cable before connecting all other ...
Page 23 - Connection Using the DP Cable; DP IN; Connecting to Headphones; Connecting to Microphone; MIC IN; Connection Using the Audio Cable; MIC OUT
23 Connection Using the DP Cable DP IN ― A DP cable shorter under 1.5 m in length is recommended. Using a cable longer than 1.5 m can affect the picture quality. Connecting to Headphones /SERVICE ― Use headphones when activating sound with an HDMI-HDMI or DP cable. Connecting to Microphone MIC IN Co...
Page 24 - Connecting the Product to a PC as a USB HUB; Connecting a PC to the Product; Utilizing the Product as a USB HUB
24 Connecting the Product to a PC as a USB HUB Connecting a PC to the Product ― The product can function as a HUB by connecting to a PC via a USB cable. You can connect a source device directly to the product and control the device from the product, without having to connect the device to the PC. To...
Page 27 - Tidying Up the Connected Cables
27 Tidying Up the Connected Cables 1 2 3 4 Stand assembly is complete. Adjust the screen, as shown in the figure. Connect cables to the appropriate connectors. Run the cables through the holder in the direction of the arrow from the lower part of the holder, as shown in the image.Pull cable down to ...
Page 28 - Correct posture to use the product; Driver Installation
28 Correct posture to use the product Use the product in the correct posture as follows: • Allow a distance of 45 to 50cm between your eye and the screen, and look slightly downward at the screen. • Keep your eyes directly in front of the screen. • Straighten your back. • Adjust the angle so light d...
Page 29 - Picture Mode; In PC mode
29 Game A detailed description of each function is provided. Refer to your product for details. Chapter 04 ― The functions available may vary depending on the product model. The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve qua...
Page 30 - Refresh Rate; Black Equalizer
30 Refresh Rate Change the screen refresh rate. A higher refresh rate can reduce eye strain. • DisplayPort : 60 Hz / 100 Hz / 120 Hz / 144 Hz • HDMI1 , HDMI2 : 60 Hz / 100 Hz / 120 Hz / 144 Hz ― This menu is not available when FreeSync is set to Standard Engine or Ultimate Engine mode. ― When changi...
Page 31 - FreeSync; How do you enable FreeSync?
31 FreeSync FreeSync technology is solution that eliminates screen tearing without all the usual lag and latency. This feature will eliminate screen tearing and lag during game play. Improve your gaming experience.The displayed FreeSync menu items on the monitor may vary, depending on the monitor mo...
Page 32 - The models in the Graphic Cards list supports FreeSync; Low Input Lag
32 The models in the Graphic Cards list supports FreeSync FreeSync can only be used with specific AMD graphics card models. Refer to the following list for supported graphics cards:Make sure to install the latest official graphics drivers from AMD that support FreeSync . ― For additional AMD graphic...
Page 33 - In AV mode; Save Settings
33 In AV mode • 4:3 : Display the picture with an aspect ratio of 4:3. Suitable for videos and standard broadcasts. • 16:9 : Display the picture with an aspect ratio of 16:9. • Screen Fit : Display the picture with the original aspect ratio without cutting off. • 17" (4:3) : Use a 4:3 aspect rat...
Page 34 - Screen Setup
34 Screen Setup Configure the screen settings such as brightness.A detailed description of each function is provided. Refer to your product for details. Chapter 05 ― The functions available may vary depending on the product model. The color and shape of parts may differ from what is shown. Specifica...
Page 37 - Adjusting OSD (On Screen Display) settings; Language
37 Adjusting OSD (On Screen Display) settings A detailed description of each function is provided. Refer to your product for details. Chapter 06 ― The functions available may vary depending on the product model. The color and shape of parts may differ from what is shown. Specifications are subject t...
Page 38 - Lighting; Local Dimming
38 Setup and Reset A detailed description of each function is provided. Refer to your product for details. Chapter 07 ― The functions available may vary depending on the product model. The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to ...
Page 40 - Key Repeat Time; Power LED On; Reset All
40 DisplayPort Ver. Select your DisplayPort version. ― Incorrect settings may cause the screen to go blank. If this occurs, check the device specifications. ― If the monitor (when set to HDMI1 , HDMI2 or DisplayPort ) is in power saving mode or is displaying the message Check Signal Cable or power s...
Page 41 - HDR
41 Information View the current input source, frequency and resolution. GamePictureOnScreen DisplaySystem Information Information LC********/**S/N:************** Exit HDMI1 ****x**** ** kHz ** Hz Black Equalizer Off 12 120 On Response Time Refresh Rate FreeSync Low Input Lag Picture Mode: Custom Hz ...
Page 43 - Installing the Software; System Requirements
43 Installing the Software Chapter 08 Easy Setting Box Easy Setting Box enables users to use the monitor by partitioning multiple sections. To install the latest version of Easy Setting Box , download it from the Samsung Electronics website at http://www.samsung.com. ― The software may not work prop...
Page 44 - Troubleshooting Guide; Requirements Before Contacting Samsung; Checking the Resolution and Frequency; Screen issue
44 Troubleshooting Guide Chapter 09 Requirements Before Contacting Samsung Customer Service Center ― Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. Testing the Product Check if your product is operating ...
Page 47 - General
47 Specifications Chapter 10 General Model Name C27HG70QQ* C32HG70QQ* Size 27 Class (26.9 Inches / 68.4 cm) 32 Class (31.5 Inches / 80.0 cm) Display area 596.736 mm (H) x 335.664 mm (V)23.5 Inches (H) x 13.2 Inches (V) 697.344 mm (H) x 392.256 mm (V)27.5 Inches (H) x 15.4 Inches (V) Pixel Pitch 0.23...
Page 51 - Appendix; Responsibility for the Pay Service (Cost to; Others
51 Appendix Chapter 11 Responsibility for the Pay Service (Cost to Customers) ― When the service is requested, in spite of in warranty, we may charge you for a visit from a service technician in the following cases. Not a product defect Cleaning of the product, Adjustment, Explanation, Re-installati...
