Samsung C27H800FCU - User Manual

5 Cleaning ― Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. ― Take the following steps when cleaning. 1 Power off the product and computer. 2 Disconnect the power cord from the product. ― Hold the power cable by the plug and do not touch the cable with w...

6 Warning • DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES. • Do not install the product in poorly ventilated spaces such as a bookcase or closet. • Install the product at least 10 cm away from the wall to allow ventilation. ...

7 Warning • There is a high voltage inside the product. Never disassemble, repair or modify the product yourself. ‒ Contact Samsung Customer Service Center for repairs. • To move the product, first disconnect all the cables from it, including the power cable. • If the product generates abnormal soun...

9 Preparations Chapter 02 Parts Control Panel ― The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. LEFT Return JOG Button Function Key Guide RIGHT DOWN PRESS(ENTER) Power LED UP Icons Description JOG Button Multi direct...

10 Direct Key guide ― The shortcut button screen (OSD menu) shown below is displayed only when the monitor screen is turned on, the computer resolution changes, or the input source changes. ― The function buttons page shows if Eye Saver Mode is enabled. : On : Off Brightness Volume Features Eye Save...

11 Function Key Guide ― To enter the main menu or to use other items, press the JOG button to display the Function Key Guide. You can exit by pressing the JOG button again. Return UP/DOWN/LEFT/RIGHT: Move to the item you want. The description for each item will appear when the focus changes.PRESS(EN...

13 Changing Brightness, Contrast and Sharpness settings You can adjust Brightness , Contrast or Sharpness by moving the JOG button up or down, if no OSD menu is displayed. Brightness Contrast Sharpness 100 ― The displayed image may differ depending on the model. ― The default brightness can vary dep...

14 Reverse Side ― The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. DP IN HDMI IN DP OUT POWER IN Port Description POWER IN Connect the power cord for your monitor to the POWER IN port on the back of the product. DP OU...

15 Adjusting the Product Tilt and Height ― The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. -30.0° (±2.0°) ~ 30.0° (±2.0°) -2.0° (±2.0°) ~ 92.0° (±2.0°) -5.0° (±2.0°) ~ 24.0° (±2.0°) 0 ~ 135.0 mm (±5.0 mm) • The monit...

17 Precautions for moving the monitor • Do not directly apply pressure on the screen. • Do not hold the screen when moving the monitor. • Do not hold the product upside down only by the stand. • Hold the lower corners or edges of the monitor when moving it. • When moving the monitor, rotate to portr...

18 Installing a Wall-mount Kit or Desktop Stand ― Power the product off and remove the power cable from the power socket. 1 4 3 2 A B Attach the wall-mount kit or desktop stand here Wall-mount bracket (optional) Align the grooves and tightly fasten the screws on the bracket on the product with the c...

19 Installation Attaching the Stand ― Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. : The product is curved. Placing pressure on the product when on a flat surface may damage the product. When the product is on the ground f...

20 Removing the Stand ― Before removing the stand from the monitor, place the monitor on a flat and stable surface with the screen facing down. : The product is curved. Placing pressure on the product when on a flat surface may damage the product. When the product is on the ground facing up or down,...

21 Connecting and Using a Source Device Chapter 03 Read below before installing the monitor. 1 Check the shapes of both ends of the cables that came with the monitor, and check the shapes and positions of the matching ports on the monitor and external devices. 2 Before connecting signal cables, disc...

22 Connection Using the HDMI-DVI Cable Check to make sure that the power cables for the monitor and external devices, such as computers and set-top boxes, are not connected to the power outlet. HDMI IN ― The audio function is not supported if the source device is connected using the HDMI-DVI cable. ...

23 Connection Using the DP Cable Check to make sure that the power cables for the monitor and external devices, such as computers and set-top boxes, are not connected to the power outlet. ― A DP cable shorter under 1.5 m in length is recommended. Using a cable longer than 1.5 m can affect the pictur...

24 Connecting the Product to a PC as a USB HUB Connecting a PC to the Product ― The product can function as a HUB by connecting to a PC via a USB Type-C cable. You can connect a source device directly to the product and control the device from the product, without having to connect the device to the...

25 ― For an external mass-storage HDD requiring external power supply, be sure to connect it to a power source. ― The battery can be charged in the power-saving mode, but it cannot be charged when the product is powered off. ― Charging your USB device is not possible if the power cable is disconnect...

26 Tidying Up the Connected Cables 1 Tilt the display, as shown in the figure. Rotate the machine to the highest vertical position. Connect the corresponding cables. Arrange the cables through the groove on the COVER-REAR, and then attach the COVER-REAR SUB. When you attach the COVER-REAR SUB, pleas...

27 Correct posture to use the product Use the product in the correct posture as follows: • Straighten your back. • Allow a distance of 45 to 50cm between your eye and the screen, and look slightly downward at the screen. • Keep your eyes directly in front of the screen. • Adjust the angle so light d...

28 Picture Configure the screen settings such as brightness.A detailed description of each function is provided. Refer to your product for details. Chapter 04 ― The functions available may vary depending on the product model. The color and shape of parts may differ from what is shown. Specifications...

29 Brightness You can adjust the general brightness of the picture. (Range: 0~100)A higher value will make the picture appear brighter. ― This menu is not available when SAMSUNG M A G I C Bright is set to Dynamic Contrast mode. ― This menu is not available when Smart ECO Saving is enabled. ― This me...

30 SAMSUNG MAGIC Upscale SAMSUNG M A G I C Upscale function can enhance the layers of the picture details and the vividness of the picture. The function has more obvious effects on low-resolution pictures. ― This menu is not available when SAMSUNG M A G I C Bright is set to Cinema or Dynamic Contras...

31 Picture Size Change the picture size. ― This option is not available when FreeSync is enabled. In PC mode • Auto : Display the picture according to the aspect ratio of the input source. • Wide : Display the picture in full screen regardless of the aspect ratio of the input source. In AV mode • 4:...

32 OnScreen Display A detailed description of each function is provided. Refer to your product for details. Chapter 05 ― The functions available may vary depending on the product model. The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to...

34 DP OUT Select the input signal to output to the next monitor and the output mode to simplify the connection and control of displaying devices. ― If the MST mode is selected for DP OUT , FreeSync is not supported for all connected monitors. ― Before selecting the MST mode for DP OUT , make sure th...

35 • When this function is available, the following may occur: flashing screen or black screen, which depends on the type of the previous device used and the quality of the cable used. Try to use a Samsung branded cable, and visit the website of the graphics card manufacturer to check and update its...

36 Connecting a PC via HDMI port SST HDMI IN DP IN DP OUT ― It is recommended to connect monitors of the same series for better compatibility and stability. • When connecting a PC using HDMI cable, you must set DP OUT mode to "HDMI: SST" on the OSD menu. (OSD – System – DP OUT - HDMI:SST ) •...

37 FreeSync FreeSync technology is solution that eliminates screen tearing without all the usual lag and latency. This feature will eliminate screen tearing and lag during game play. Improve your gaming experience. • Off : Disable FreeSync . • Standard Engine : Enable the basic FreeSync functions of...

39 Smart ECO Saving The Smart ECO Saving function reduces power consumption by controlling the electric current used by the monitor panel. ― This menu is not available when Eye Saver Mode is enabled. • Off : Deactivate the Smart ECO Saving function. • On : The power consumption will automatically be...

40 Source Detection Select either Auto or Manual as the method to recognize input signal. ― This menu is not available when the MST mode is selected for DP OUT . Key Repeat Time Control the response rate of a button when the button is pressed. Acceleration , 1 sec , or 2 sec can be selected. If No R...

41 Installing the Software Chapter 07 Easy Setting Box Easy Setting Box enables users to use the monitor by partitioning multiple sections. To install the latest version of Easy Setting Box , download it from the Samsung Electronics website at http://www.samsung.com. ― The software may not work prop...

42 Troubleshooting Guide Chapter 08 Requirements Before Contacting Samsung Customer Service Center ― Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. Testing the Product Check if your product is operating ...

45 Specifications Chapter 09 General Model Name C27H800FC* Size 27 Class (27.0 Inches / 68.6 cm) Display area 597.888 mm (H) x 336.312 mm (V)23.5 Inches (H) x 13.2 Inches (V) Pixel Pitch 0.3114 mm (H) x 0.3114 mm (V)0.01226 Inches (H) x 0.01226 Inches (V) Maximum Pixel Clock 148.5 MHz Power Supply A...

48 Appendix Chapter 10 Responsibility for the Pay Service (Cost to Customers) ― When the service is requested, in spite of in warranty, we may charge you for a visit from a service technician in the following cases. Not a product defect Cleaning of the product, Adjustment, Explanation, Re-installati...

49 Extended warranty You can buy an extended warranty within 90 days of purchasing the product.The extended warranty will cover an additional period of 3 years, beyond the standard 3 year warranty.Samsung guarantee that replacement parts will be available for 5 years after the end of production.Afte...