Page 2 - Table of contents
2 Table of contents Before Using the Product Securing the Installation Space 4 Precautions for storage 4 Safety Precautions 4 Symbols 4Cleaning 5Electricity and Safety 5 Installation 6Operation 7 Preparations Parts 10 Control Panel 10 Function Key Guide 11 Changing Brightness, Contrast and Sharpness...
Page 3 - Setup and Reset; Specifications
3 Table of contents Setup and Reset Arena Lighting 34 Volume 35 Eco Saving Plus 35 Off Timer 35 PC/AV Mode 35 DisplayPort Ver. 35 Source Detection 36 Key Repeat Time 36 Power LED On 36 Reset All 36 Information 36 Installing the Software Easy Setting Box 37 Restrictions and Problems with the Installa...
Page 4 - Securing the Installation Space; Precautions for storage; Safety Precautions; Caution; Symbols; Warning; Before Using the Product
4 Securing the Installation Space Ensure some space around the product for ventilation. An internal temperature rise may cause fire and damage the product. Be sure to allow the amount of space as shown below or greater when installing the product. ― The exterior may differ depending on the product. ...
Page 5 - Cleaning; Electricity and Safety
5 Cleaning ― Take the following steps when cleaning. 1 Power off the product and computer. 2 Disconnect the power cord from the product. ― Hold the power cable by the plug and do not touch the cable with wet hands. Otherwise, an electric shock may result. 3 Wipe the monitor with a clean, soft and dr...
Page 6 - Installation
6 Warning • DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES. • Do not install the product in poorly ventilated spaces such as a bookcase or closet. • Install the product at least 10cm away from the wall to allow ventilation. •...
Page 7 - Operation
7 Warning • There is a high voltage inside the product. Never disassemble, repair or modify the product yourself. ‒ Contact Samsung Customer Service Center for repairs. • To move the product, first disconnect all the cables from it, including the power cable. • If the product generates abnormal soun...
Page 10 - Preparations; Control Panel
10 Preparations Chapter 02 Parts Control Panel ― The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Function Key Guide Power LED LEFT JOG Button RIGHT DOWN UP PRESS(ENTER) Return Game Setting Key Parts Description JOG B...
Page 13 - Changing Brightness, Contrast and Sharpness settings; Brightness; Changing the Volume setting; Volume
13 Changing Brightness, Contrast and Sharpness settings You can adjust Brightness , Contrast or Sharpness by moving the JOG button up or down, if no OSD menu is displayed. Brightness Contrast Sharpness 100 ― The displayed image may differ depending on the model. Brightness ― This menu is not availab...
Page 14 - Reverse Side; Adjusting the Product Tilt and Height
14 Reverse Side ― The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. DC 19V HDMI IN 1 HDMI IN 2 DP IN SERVICE Port Description DC 19V Connects to the AC/DC adapter. HDMI IN 1 HDMI IN 2 Connects to a source device using ...
Page 15 - Rotating the Monitor Screen
15 Rotating the Monitor Screen ― The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. You can rotate your monitor as shown below. 1 2 3 4 5 6 ― Adjust the screen following the arrow direction. ― Rotate the screen in clock...
Page 16 - Precautions for moving the monitor
16 Anti-theft Lock ― An anti-theft lock allows you to use the product securely even in public places. ― The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details. To lock an anti-theft locking device: 1 Fi...
Page 17 - Assembling the Stand base
17 Installation Assembling the Stand base 1 2 3 Open the packaging. Be careful when using a sharp object to open the packaging. The product may be damaged.Put your hands in the grooves on either side of the top layer of styrofoam covering the product and remove it. While pressing down with one hand ...
Page 18 - Removing the Stand (For Attaching the BRACKET WALL)
18 Removing the Stand (For Attaching the BRACKET WALL) ― Before removing the stand from the monitor, place the monitor on a flat and stable surface with the screen facing down. : The product is curved. Placing pressure on the product when on a flat surface may damage the product. When the product is...
Page 19 - Attaching the BRACKET WALL
19 Attaching the BRACKET WALL ― Power the product off and remove the power cable from the power socket. 1 2 4 3 A Attach the BRACKET WALL here B BRACKET WALL Align B with A on the monitor, then tightly fasten with the screws removed from the stand ( P.18 ). • Notes ‒ Using a screw longer than the st...
Page 20 - Attaching the Stand
20 Attaching the Stand ― Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. : The product is curved. Placing pressure on the product when on a flat surface may damage the product. When the product is on the ground facing up or d...
Page 21 - Connecting and Using a Source Device; Pre-connection Checkpoints; Connection Using the HDMI Cable
21 Connecting and Using a Source Device Chapter 03 Pre-connection Checkpoints ― Before connecting a source device, read the user manual provided with it.The number and locations of ports on source devices may differ from device to device. ― Do not connect the power cable before connecting all other ...
Page 22 - Connection Using an DP Cable; Connecting to Headphones
22 Connection Using an DP Cable DP IN ― A DP cable shorter under 1.5 m in length is recommended. Using a cable longer than 1.5 m can affect the picture quality. Connecting to Headphones ― Use headphones when activating sound with a HDMI-HDMI or DP cable. ― The Interactive feature in Arena Lighting i...
Page 23 - Tidying Up the Connected Cables
23 Connecting the Power (C27FG70FQ* model only) DC 19V HDMI IN 1 HDMI IN 2 DP IN SERVICE 1 2 3 1 Connect the power cable to the AC/DC adapter. Then, connect the AC/DC adapter to the DC 19V port on the back of the product. 2 Next, connect the power cable to the power outlet. 3 Press the JOG button on...
Page 24 - Correct posture to use the product; Driver Installation
24 Correct posture to use the product Use the product in the correct posture as follows: • Straighten your back. • Adjust the angle so light does not reflect on the screen. • Keep your forearms perpendicular to your upper arms and level with the back of your hands. • Keep your elbows at about a righ...
Page 25 - Picture Mode; In PC mode
25 Game A detailed description of each function is provided. Refer to your product for details. Chapter 04 Picture Mode This menu provides an optimum picture quality suitable for the environment where the product will be used. ― This menu is not available when Eye Saver Mode is enabled. Game Picture...
Page 26 - Refresh Rate; Black Equalizer
26 Refresh Rate Change the screen refresh rate. A higher refresh rate makes pictures easier to look at for longer. • DisplayPort : 60 Hz / 100 Hz / 120 Hz / 144 Hz • HDMI1 , HDMI2 : 60 Hz / 100 Hz / 120 Hz ― This menu is not available when FreeSync is set to On mode. Set FreeSync to Off and change t...
Page 27 - FreeSync; How do you enable FreeSync?
27 FreeSync FreeSync technology is solution that eliminates screen tearing without all the usual lag and latency. This feature will eliminate screen tearing and lag during game play. Improve your gaming experience.The displayed FreeSync menu items on the monitor may vary, depending on the monitor mo...
Page 28 - The models in the Graphic Cards list supports FreeSync; Low Input Lag; Screen Size
28 The models in the Graphic Cards list supports FreeSync FreeSync can only be used with specific AMD graphics card models. Refer to the following list for supported graphics cards:Make sure to install the latest official graphics drivers from AMD that support FreeSync . ― For additional AMD graphic...
Page 29 - In AV mode; Save Settings; Game Setting Key
29 In AV mode • 4:3 : Display the picture with an aspect ratio of 4:3. Suitable for videos and standard broadcasts. • 16:9 : Display the picture with an aspect ratio of 16:9. • Screen Fit : Display the picture with the original aspect ratio without cutting off. • 17" (4:3) : Use a 4:3 aspect rat...
Page 30 - Screen Setup
30 Screen Setup Configure the screen settings such as brightness.A detailed description of each function is provided. Refer to your product for details. Chapter 05 Picture Mode This menu provides an optimum picture quality suitable for the environment where the product will be used. ― This menu is n...
Page 32 - HDMI Black Level; Eye Saver Mode
32 HDMI Black Level If a DVD player or set-top box is connected to the product via HDMI, image quality degradation (contrast/color degradation, black level, etc.) may occur, depending on the connected source device. In such case, HDMI Black Level can be used to adjust the image quality. If this is t...
Page 33 - Adjusting OSD (On Screen Display) settings; Language
33 Adjusting OSD (On Screen Display) settings A detailed description of each function is provided. Refer to your product for details. Chapter 06 Language Set the menu language. ― A change to the language setting will only be applied to the onscreen menu display. ― It will not be applied to other fun...
Page 36 - Source Detection; Key Repeat Time; Power LED On; Reset All
36 Source Detection Select either Auto or Manual as the method to recognize input signal. Key Repeat Time Acceleration , 1 sec , or 2 sec can be selected. If No Repeat is selected, a command responds only once when a button is pressed. Power LED On Configure the settings to enable or disable the pow...
Page 37 - Installing the Software; Restrictions and Problems with the Installation; System Requirements
37 Installing the Software Chapter 08 Easy Setting Box Easy Setting Box enables users to use the monitor by partitioning multiple sections. To install the latest version of Easy Setting Box , download it from the Samsung Electronics website at http://www.samsung.com. ― The software may not work prop...
Page 38 - Troubleshooting Guide; Requirements Before Contacting Samsung; Checking the Resolution and Frequency; Screen issue
38 Troubleshooting Guide Chapter 09 Requirements Before Contacting Samsung Customer Service Center ― Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. Testing the Product Check if your product is operating ...
Page 41 - General
41 Specifications Chapter 10 General Model Name C24FG70FQ* C27FG70FQ* Size 24 Class (23.5 Inches / 59.8 cm) 27 Class (27.0 Inches / 68.6 cm) Display area 521.3952 mm (H) x 293.2848 mm (V)20.5 Inches (H) x 11.5 Inches (V) 597.888 mm (H) x 336.312 mm (V)23.5 Inches (H) x 13.2 Inches (V) Pixel Pitch 0....
Page 44 - Appendix; Responsibility for the Pay Service (Cost to; Others
44 Appendix Chapter 11 Responsibility for the Pay Service (Cost to Customers) ― When the service is requested, in spite of in warranty, we may charge you for a visit from a service technician in the following cases. Not a product defect Cleaning of the product, Adjustment, Explanation, Re-installati...
