Page 2 - AM/FM Stereo Receiver
2 RX-1052 AM/FM Stereo Receiver > 10 cm > 4 in > 10 cm > 4 in > 10 cm > 4 in > 10 cm > 4 in ������ ��� ���� ������ ������ ������������������������������ ������� ����� �� ����� ������ ���� ����� ������ ������ ���� ������ ���� �������� � � ���� ������ This symbol means that thi...
Page 3 - English; : Front Panel Controls
3 English 1: Front Panel Controls 2: RR-AT96 Remote Control � � ������ ���� � ��� � ���� �� ������ � � ������ ������ ���� ������� ���� ������ ���� �� ����� ���� ������ ����� � ����� � ����� � ����� ��� ���� ������� ���� � � ������� � � � � � � � � � � � � � � � � � � � � �� � � � � ���� ������ � � �...
Page 4 - Important Safety Instructions; Notice; FCC Information
4 RX-1052 AM/FM Stereo Receiver Important Safety Instructions WARNING: There are no user serviceable parts inside. Refer all servic- ing to qualified service personnel. WARNING: To reduce the risk of fire or electric shock, do not expose the unit to moisture or water. Do not expose the unit to drippin...
Page 5 - : Antenna Connections; : Rear Panel Connections
5 English 4: Antenna Connections ��� �� ��� ���� �� ������ ��� ������ ��� ������ ��� �� ������ ������ ��� ��� ��� � � ������ ������������ ����� �� ��� � � �� ���� ������� � � ����� ��� ��� ��� ��� �� ����� ������� ���������������������� ����������� AM/FM STEREO RECEIVER MODEL NO. : RX-1052 POWER CON...
Page 9 - 0: Zone Connections and Preamp Output Connection
9 English 10: Zone Connections and Preamp Output Connection ��� ��� �� ����� ������� ���������������������� ����������� AM/FM STEREO RECEIVER MODEL NO. : RX-1052 POWER CONSUMPTION: 300 WATTS �� ��� ���� �� ��� ������� ������� ������� ������ ��� ������ ��� ������ ��� ��� ��� �� ��� ������� �� �������...
Page 10 - Contents; CONNECTIONS; sdf
10 RX-1052 AM/FM Stereo Receiver Contents Important Safety Instructions . . . . . . . . . 3 Notice . . . . . . . . . . . . . . . . . . . . . . . . . . 3 FCC Information . . . . . . . . . . . . . . . . . . . . . . . .3 Caution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 1: Front Pane...
Page 11 - er
11 English Controls, Buttons and Features . . . . . . . 16 RR-AT96 Remote Control . . . . . . . . . . . . . . . . .16 Front-panel Display 6 . . . . . . . . . . . . . . . . .16 Remote Sensor 1 . . . . . . . . . . . . . . . . . . . .17 STANDBY Button 2 POWER Switch \ . . . . . .17 ON/OFF Buttons A . ....
Page 12 - About Rotel; Key Features
12 RX-1052 AM/FM Stereo Receiver About Rotel A family whose passionate interest in music led them to manufacture high fidelity components of uncompromising quality founded Rotel over 45 years ago. Through the years that passion has remained undiminished and the family goal of providing exceptional va...
Page 13 - Rear Panel
13 English Each of the source components (VCR, TV set-top box, tape recorder, CD player) in the sys-tem is connected to the RX-1052 inputs with a pair of standard RCA cables for analog au-dio. A composite video input is provided for four of the source components. In addition to the connections for t...
Page 14 - Making Connections
14 RX-1052 AM/FM Stereo Receiver AC Input ] Your RX-1052 is configured at the factory for the proper AC line voltage in the country where you purchased it (USA: 120 volts/60Hz AC or CE: 230 volts /50 Hz AC ). The AC line configuration is noted on a decal on the back of your unit. Plug the supplied cor...
Page 15 - Audio Recorder; yh; TV Monitor
15 English Cable, Satellite, or HDTV Tuner l; z See Figure 8 TV tuner connections can be made to the VID-EO 1, 2, 3, or 4 inputs. Connect the left and right analog outputs from the TV tuner to the left and right audio IN jacks of the desired VIDEO 1–4 input. Connect a composite video cable from the ...
Page 16 - FM Antenna; ZONE Connections; uisdf; PRE OUT Connections; Controls, Buttons and; RR-AT96 Remote Control
16 RX-1052 AM/FM Stereo Receiver AM Antenna t See Figure 4 The RX-1052 includes a plastic loop anten-na to receive AM radio signals. Remove this antenna from the box and locate it near the RX-1052. It can be tacked to a wall, using the mounting tab provided. Alternatively, you can fold the center po...
Page 18 - TUV; Basic Operations
18 RX-1052 AM/FM Stereo Receiver LABEL Button H The LABEL button on the remote is used with the ENTER button in programming custom labels for the input buttons. These custom la-bels appear in the front panel display when an input is selected. ENTER Button I The ENTER button on the remote serves two ...
Page 19 - GQ; Selecting Inputs; BR; RS
19 English Muting the Sound L The volume of the RX-1052 can be turned off or muted. Push the MUTE button on the remote once to turn the sound off. A MUTE ON indi-cation appears in the front panel display. Press the MUTE button again or adjust the volume settings to restore output levels. Selecting S...
Page 20 - EP; Selecting FM Mono; Selecting AM or FM; Using Station Presets; EF
20 RX-1052 AM/FM Stereo Receiver The NUMERIC buttons can also be used for direct access tuning (see next section). Frequency Direct Tuning EP If you know the frequency of the desired sta-tion, you may tune it directly using the DIRECT button and the NUMERIC buttons on the re-mote control. 1. Press t...
Page 21 - Additional Features; Turning the Display On/Off; DTUV; Controlling other Rotel; EBQK; Custom Setup Procedures; Custom Labels; HIQ
21 English Additional Features Turning the Display On/Off D To turn the front panel display on or off, press and hold the DISP button on the remote control. When the display is off, pressing any control button turns the display on for five seconds. RDS Reception 6 DTUV RDS (the Radio Data System) all...
Page 22 - Zone Setup Procedures
22 RX-1052 AM/FM Stereo Receiver Setting the Tuner Region 790- The AM/FM tuner is configured at the factory for the operation in the region where you pur-chased the unit: the USA or Europe. Should you need to change this setting: 1. With the RX-1052 on, press the SPKR B, TUNE/PRESET, and MONO buttons...
Page 23 - Multi Zone Operation; BCQRS
23 English NOTE: You can also adjust the volume level for the remote channels using the Setup Menu. Follow step 1 shown above. Then in step 2 select “Z2 VOL”, “Z3 VOL” or “Z4 VOL”. However it is easier to make zone volume ad- justments by using the SEL button on the front panel. See the “Controlling...
Page 24 - Controlling a Zone from the; ABCQ; Troubleshooting
24 RX-1052 AM/FM Stereo Receiver To turn a zone on or off: 1. Press the front panel SEL button repeatedly until the desired zone is shown in the dis-play (Z2, Z3, Z4 or MAIN). 2. Within 10 seconds, press the ZONE but- ton to toggle the remote zone on or off. 3. Following 10 seconds with no commands,...
Page 25 - Specifications; Audio; FM Tuner; AM Tuner; General
25 English Specifications Audio Continuous Amplifier Power 100 watts/channel (20–20k Hz, <0.05% THD, 8 ohms) Total Harmonic Distortion <0.05% at rated power Intermodulation Distortion (60 Hz:7 kHz) <0.05% at rated power Frequency Response Line Level: 10 Hz - 70 kHz, ±3 dB Phono: 20 Hz - 20 kH...
