ResMed VPAP ST - Manual - manualsarea.com

Page 2 - VPAP at a glance; The VPAP system comprises the following elements:; heated air tubing • 30W power supply unit (does not support H5i) •; Welcome; Welcome and Information Guides.

Air filter DC power inlet SD card slot Module/Adapter port Air outlet VPAP at a glance The VPAP system comprises the following elements: • VPAP device • Air tubing • 90W power supply unit • S9 travel bag • SD card • S9 SD card protective folder.Optional components include: • H5i heated humidifier • ...

Page 3 - Setup; Connect the DC plug of the power supply unit to the rear of the VPAP.

5 1 3 2 4 Setup 1. Connect the DC plug of the power supply unit to the rear of the VPAP. 2. Connect the power cord to the power supply unit. 3. Plug the other end of the power cord into the power outlet. 4. Connect one end of the air tubing firmly onto the air outlet. 5. Connect the assembled mask s...

Page 4 - VPAP basics; The control panel of your VPAP device includes; Setup menu

VPAP basics The control panel of your VPAP device includes an LCD screen as well as a Start/Stop button, Push dial and the Info and Setup menu keys. Key: Info menu Setup menu Push dial Start/Stop Climate Control Heated tube Ramp Humidity level Home Setup menu Allows you to make changes to settings o...

Page 5 - Adjusting ramp time

1. From your HOME screen, turn until the RAMP screen is displayed in blue. 2. Press . The selection is highlighted in orange. 3. Turn until the ramp time you require is displayed. 4. Press to confirm your choice. Adjusting ramp time Designed to make the beginning of treatment more comfortable, ramp ...

Page 6 - Selecting the mask type; Press

Selecting the mask type To select your type of mask: 1. Press . The SETTINGS screen is displayed. 2. Turn until Mask is displayed in blue. 3. Press . The selection is highlighted in orange. 4. Turn until the mask setting that you require is displayed. 5. Press to confirm your choice. 6. Push to retu...

Page 7 - Getting started; If your clinician has enabled SmartStart your device will start

Getting started 1. Make sure the power is connected. 2. Adjust the ramp time if required. 3. Fit your mask as described in your mask user guide. 4. To start therapy, simply breathe into the mask and/or press . 5. Lie down and arrange the air tubing so that it is free to move if you turn in your slee...

Page 8 - Viewing the treatment screens

Viewing the treatment screens Depending on how the system has been configured, you will see one of the following example screens (shown in the ST mode) once therapy has started: 9 H5i humidifier 9 H5i humidifier 9 ClimateLine or ClimateLine MAX heated air tube 9 Climate Control – Auto 9 H5i humidifi...

Page 9 - Viewing the Info menu; To

To toggle between treatment screens 1 and 2, press from your HOME screen. 9 Treatment with device trigger (Timed) and cycle (Timed, Ti Max or Ti Min) breath indicators 9 Treatment with spontaneous trigger and cycled breaths Viewing the Info menu The Info menu has a series of screens showing your sle...

Page 10 - Cleaning and maintenance; Daily; Air filter

7 Cleaning and maintenance Refer to your mask and humidifier user guides for detailed instructions regarding the care of these devices. Daily Remove the air tubing by pulling on the finger grips on the cuff. Hang it in a clean, dry place until next use. Weekly 1. Remove the air tubing from the VPAP ...

Page 11 - SD card; Removing the card; For Troubleshooting information

SD card An SD card has been supplied to gather therapy data from your VPAP device and provide settings updates from your clinician. When instructed to do so, disconnect the VPAP device from the power outlet, remove your SD card, insert it in the protective folder and send it to your clinician. Remov...

Page 12 - S9 VPAP ST / S9 VPAP S

Global leaders in sleep and respirator y medicine w w w.resmed.com 368698/1 2012-02 S9 VPAP ST / S9 VPAP S WELCOME EUR1 Manufacturer: ResMed Ltd 1 Elizabeth Macarthur Drive Bella Vista NSW 2153 Australia. Distributed by: ResMed Corp 9001 Spectrum Center Boulevard San Diego CA 92123 USA. ResMed (UK) ...

ResMed VPAP ST - Manual

Table of Contents:

Summary

Other ResMed Models