POSIFLEX PP-8000 - Manual
POSIFLEX PP-8000 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – GETTING STARTED; CONGRATULATION; You have made a very wise decision by purchasing the easy loading; PRODUCT BRIEFING; WEPOS; The Aura PP-8000 series support a guillotine type auto cutter for; kitchen bell; for such reminder
- Page 3 – UNPACKING; Followings are items you may find when you carefully unpack the; Be sure to save the packing materials in; No interface cable for PP-8000L; OPTIONS; Wall mount kit
- Page 4 – PRODUCT PICTURES; Top View; Wall Mount Hanging Hole
- Page 5 – Rear View; INDICATORS
- Page 6 – LOADING PAPER; Desk Top Application; CONNECTING CABLES; Serial Connection
- Page 7 – Parallel Connection
- Page 8 – kitchen bell connection instead.; Power Connection; The power connector is a 3-PIN jack between the peripheral; Power On; When all the above cable connections are made correctly, you may; Self Test; Press and hold down the feed
- Page 9 – SPECIAL ADJUSTMENTS; Paper Near End Sensor
- Page 10 – front edge inside the paper exit slot.; INSTALLING DRIVER; There will always be a Posiflex Product Information CD or DVD or a; LAN PRINTER SPECIFIC ISSUES; Web Manager; As the LAN setup for the PP-8000L can be set freely, if the changes; LAN POS Printer Manager; This utility can be used to manage multiple PP-8000L’s connected in; Printer Driver Setup; Any PC connected in same network can use TCP/IP to use PP-8000L
- Page 11 – OPERATION GUIDE; MAINTENANCE GUIDE LINES; Always turn off and disconnect power before opening the cover.; GENERAL CLEANING; NOTE: Never do this when print head is still hot; be dried completely.; TROUBLE SHOOTING; General Problems; –Make sure
- Page 14 – USEFUL TIPS
- Page 16 – SPECIFICATIONS; PRINTER; ITEM SPECIFICATION; PAPER; PAPER TYPE; POWER ADAPTOR; ITEM REQUIREMENT
- Page 17 – FURTHER TECHNICAL INFORMATION; PRINTER SETUP; Switch
- Page 18 – ADVANCED SETUP; Switch position
- Page 19 – MULTIPLE INTERFACE ISSUE; only; . Simultaneous multiple host connections could result; UPOS CONCERNS; The UPOS compliance and WEPOS compliance ability of the PP-8000
- Page 20 – Wall Mount Application; For wall mount application, the sensor block should be under the
Part 1
FCC Notes:
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions manual, may cause interference to radio communications.
It has been tested and found to comply with limits for a Class A digital device pursuant to subpart
J of Part 15 of FCC Rules, which are designed to provide reasonable protection against
interference when operated in a commercial environment. Operation of this equipment in a
residential area is likely to cause interference in which case the user at his own expense will be
required to take whatever measures to correct the interference.
CE manufacturer’s Declaration of Conformity
(EC Council Directive 89/336/EEC of 3 May 1989)
This product has been designed and manufactured in accordance with the International Standards
EN50081-1/01.92 and EN50082-1/01.92 following the provisions of the Electro Magnetic
Compatibility Directive of the European Communities as of May 1989
Warranty Limits:
Warranty terminates automatically when any person other than the authorized technicians opens
the machine. The user should consult his/her dealer for the problem happened. Warranty voids if
the user does not follow the instructions in application of this merchandise. The manufacturer is by
no means responsible for any damage or hazard caused by improper application.
About This Manual:
Posiflex has made every effort for the accuracy of the content in this manual. However, Posiflex
will assume no liability for any
technical inaccuracies or editorial or other errors or omissions
contained herein, nor for direct, indirect, incidental, consequential or otherwise damages, including
without limitation loss of data or profits, resulting from the furnishing, performance, or use of this
material.
This information is provided “as is” and Posiflex Technologies, Inc. expressly disclaims any
warranties, expressed, implied or statutory, including without limitation implied warranties of
merchantability or fitness for particular purpose, good title and against infringement.
The information in this manual contains only essential hardware concerns for general user and is
subject to change without notice. Posiflex reserves the right to alter product designs, layouts or
drivers without notification. The system integrator shall provide applicative notices and
arrangement for special options utilizing this product. The user may find the most up to date
information of the hardware from web sites: http://www.posiflex.com or
http://www.posiflex.com.tw or http://www.posiflexusa.com
All data should be backed-up prior to the installation of any drive unit or storage peripheral.
Posiflex will not be responsible for any loss of data resulting from the use, disuse or misuse of this
or any other Posiflex product.
All rights are strictly reserved. No part of this documentation may be reproduced, stored in a
retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying,
or otherwise, without prior express written consent from Posiflex Technologies, Inc. the publisher
of this documentation.
©
Copyright Posiflex Technologies, Inc. 2009
All brand and product names and trademarks are the property of their respective holders.
Aura Series
PP-8000 / PP-8000L / PP-8000U
THERMAL PRINTER
USER’S MANUAL
Rev.: A0
P/N: 19770900020
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Part 2 GETTING STARTED CONGRATULATION You have made a very wise decision by purchasing the easy loading; low noise; high resolution; light weight; high reliability and high performance thermal printer Aura (PP-8000, PP-8000L & PP-8000U) series of Posiflex products. This series of printers has be...
Part 3 UNPACKING Followings are items you may find when you carefully unpack the carton that delivers Aura series printer. If there is any discrepancy or problem, contact your dealer immediately. Be sure to save the packing materials in case the printer needs to be shipped at some point in the futur...
Part 4 PRODUCT PICTURES Top View Front View Bottom View Bottom Cover Power Switch Power LED Error LED Paper Out LED FEED Switch Top Hood Top Cover Hood Release Cutter Cover Paper Exit Rubber Foot Window Plate Screw Setup Window Plate Wall Mount Hanging Hole Rubber Foot