POSIFLEX KS-6812 - Manuals

POSIFLEX KS-6812 – Manual in PDF format online.

Manuals:

Manual

Manual POSIFLEX KS-6812

Summary

Page 2 - Part 2; ALERT TO OUR HONORABLE CUSTOMERS:; This product contains inside a Lithium battery. Please always; DAILY MAINTENANCE GUIDE; For regular cleaning of the KS systems, please use only soft haired; CAUTION; Risk Of Explosion If Battery Is Replaced By An Incorrect Type

Part 2 ALERT TO OUR HONORABLE CUSTOMERS: z Please always read thoroughly all the instructions and documents delivered with the product before you do anything about it. Don’t take any premature action before you have a full understanding of the consequences. z This product contains inside a Lithium b...

Page 3 - Part 3; INTRODUCTION; PRODUCT PICTURES; Front View; PARTS IDENTIFICATION; unit

Part 3 INTRODUCTION PRODUCT PICTURES Front View Rear View Side Views Bottom View Inside Base PARTS IDENTIFICATION 1. Main unit 2. Touch panel / LCD panel 3. Power indicator 4. Base stand 4 6 1 5 3 7 8 2 1 9 18 16 20 17 19 7 12 15 13 13 5 11 10 14

Page 4 - Part 4; CF memory card reader; PRODUCT FEATURES; XGA; Vertical type LCD panel with easy tilt; with conversion cable.

Part 4 5. Optional side mount kit 6. HDD cover CF memory card reader 7. Hinge cover 8. Base back cover 9. Cable exit 10. Power switch 11. LCD brightness up button 12. LCD brightness down button 13. Base back cover hook 14. USB ports on left side 15. Sundries trough for pencils, paper clips etc. 16. ...

Page 5 - Part 5; eSATA; Touch control functions; or

Part 5 5. one VGA port 6. one SATA data port plus one HDD power connector for optional SATA HDD in base eSATA 7. one audio jack for stereo line output 8. one CR port capable of controlling 2 cash drawers max. 9. one 2 pin type DC 12 V power input connector 10. reserved one LPT interface through use ...

Page 6 - Part 6; INSTALLATION GUIDES; TECHNICAL MANEUVERS; Applicable technical maneuvers in KS-6812 series include serial; qualified technician; TILTING LCD PANEL; The tilting mechanism in KS-6812 series utilizes; DISCONNECTING ALL CABLES; With the LCD panel turned to most backward position, the main I/O; first note orientations of every existing cable connection; and then; always hold the connector head; instead of; artificial destruction.

Part 6 INSTALLATION GUIDES CAUTION: Before any installation or cable connection to the set, please always make certain that the system is turned off and the external power source to the set is removed to prevent electric hazard! Never touch any metal pin in the connectors or circuits to avoid high v...

Page 7 - Part 7; OPENING BASE BACK COVER; In order to settle the; CABLE ROUTING IN BASE; For cable routing in the mini slim base,; Pole Display; For the KS-6812 series with

Part 7 OPENING BASE BACK COVER In order to settle the touch terminal properly in a point of sale system, all the cable connections have to be routed through its base. Therefore, please observe the side view pictures of the base trunk at the left and release the triangle marked hooks to remove the ba...

Page 8 - Part 8; PREPARING THE MAIN UNIT; On the back of the main unit, there is a

Part 8 PREPARING THE MAIN UNIT On the back of the main unit, there is a service window facing the base trunk in most of application. It is recommended to tilt the LCD panel to most backward position and rest the surface of LCD panel over a piece of soft clean cloth on a desktop to access the service...

Page 9 - Part 9; The KS system will directly control the cash drawer using the cash; CONNECTING CABLES; To have the re-assembled main unit with stand assembly ready for; Damages due to incorrect connection or orientation are; Some connectors like the COM3 or LAN or CR connector have to be

Part 9 The KS system will directly control the cash drawer using the cash drawer port (CR) both to operate the opening mechanism and to monitor the drawer open status. Both functions may be accomplished under software control of the COM1 serial port. Use the cable supplied with the cash drawer (Part...

Page 10 - OPERATING SYSTEM RECOVERY; For KS-6812 systems with operating system in the Compact Flash; A bootable new; For KS-6812 systems preloaded with Windows XP Pro or WEPOS on; Please use the recovery DVD in rescue operation only. Using it; All upgrade devices; OPERATING SYSTEM INSTALLATION

Part 10 OPERATING SYSTEM RECOVERY For KS-6812 systems with operating system in the Compact Flash Card if the system is installed with the CF card reader, once the Compact Flash is damaged for any reason, the thin client may fail to boot. A bootable new Compact Flash Card will be required to have the...

Page 11 - USING THE TOUCH TERMINAL; APPLICATION ENVIRONMENT; Ventilation

Part 11 USING THE TOUCH TERMINAL APPLICATION ENVIRONMENT It is very important that you check the following operational guidelines: Ventilation This terminal must NOT be operated in an environment with restricted ventilation. There must be at least 25 mm air clearance around any top or side ventilati...

Page 12 - Automatic Power On Control; BRIGHTNESS CONTROL

Part 12 for within 10 seconds. There must always be at least 10 seconds waiting before switching on again once the system is powered off successfully. Automatic Power On Control The system may also turn on according to some preset conditions such as Modem Ring Up or Alarm Clock Wake Up or LAN Wake U...

Page 13 - Main LCD Display; Do not; PARALLEL PORT; for high sensitivity audio input if ordered.

Part 13 CUSTOMER DISPLAY Please follow the instructions on the manual that comes along with the customer display when it is installed. DISPLAY ISSUES Main LCD Display For best viewing result please set your display resolution at 1024 x 768 with high color. The system Video Memory is shared from syst...

Page 14 - CF MEMORY CARD READER; Both are set to IDE mode for data transfer.; TOUCH PANEL; Mouse Emulation

Part 14 CF MEMORY CARD READER If the CF card reader is installed and the CF card is used for system data storage device, it is recognized by the system as the IDE channel 1 Master device. The CF memory card reader inside main unit accepts a type II CF memory card. Please note that usual utilities su...

Page 15 - Posiflex USB Touch Manager; A program named “ Posiflex USB Touch Manager” and a right-click

Part 15 Posiflex USB Touch Manager A program named “ Posiflex USB Touch Manager” and a right-click sticky button tool in the program group “Posiflex USB Touch Tools” is installed in the preloaded Windows system with a USB interface touch panel controller. This program can also be obtained by downloa...

Page 16 - Monitor; LCD display monitor LM-

Part 16 2 nd Monitor The 2 nd LCD display monitor LM- 3112 can be attached to the rear edge of base bottom of KS-6812 series if no pole display is attached. Refer to the picture at left. Use the 2 attached screws to fix the metal base of the LM to the bottom plate of mini slim base at the circled po...