POSIFLEX 5700G - Manual
POSIFLEX 5700G – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Vertical type LCD panel with easy tilt
- Page 4 – INSTALLATION GUIDES; OPENING CABLE COVER; the stand to the most horizontal position for ease of operation.; Be sure to take the key out of the hole before doing next; Then push the lock/release lever on the base backward to adjust the
- Page 5 – CONNECT/DISCONNECT CABLES; Damages due to incorrect; SEPARATING MAIN UNIT
- Page 6 – OPENING STAND ASSEMBLY
- Page 7 – ROUTING THE CABLES; On the back of the main unit, there are 4 matching pegs and a service; CAUTION; Risk Of Explosion If Battery Is Replaced By An Incorrect Type; This End to Other Devices
- Page 8 – INSTALLING UPGRADE KIT; The USB power arrangement in this system has been particularly; WIRELESS PRINTER; The Posiflex wireless connection supports various application
- Page 9 – JOINING MAIN UNIT AND STAND; Matching Holes
- Page 10 – FORMAT.COM shall never be used on CF Card
- Page 11 – For the Jiva TP/LT-5800G preloaded with Windows XP Pro or Windows; Please use the recovery CD in rescue operation only. Using it; All upgrade devices; OPERATING SYSTEM INSTALLATION; There are an IDE connector and a 4 pin power connector in the I/O
- Page 12 – USING THE TOUCH POS; APPLICATION ENVIRONMENT; Ventilation
- Page 13 – Battery replacement:; Power Supply
- Page 15 – AUTOMATIC POWER ON; By RTC Alarm preset; DISPLAY RESOLUTION; External LCD Monitor
- Page 16 – SYSTEM PROTECTION; In the Posiflex POS system delivered with preloaded OS, there is a
- Page 17 – TOP MOUNT CUSTOMER DISPLAY; never try to open the cover
- Page 18 – If the system integrator arranges the TP/LT5700G to boot from a; Mouse Emulation; The touch panel in Jiva TP-5700G / Jiva TP-5800G uses either a PS2
- Page 19 – Posiflex Touch Terminal Manager; A program named “Posiflex Touch Terminal Manager” is installed in; RS232 Touch Controller; If the Jiva TP-5700G or Jiva TP-5800G purchased is the leading edge; Removal of this cover will void the product; Once the RS232 touch controller driver is installed, the user can
Part 1
FCC Notes:
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions manual, may cause interference
to radio communications. It has been tested and found to comply with limits for a Class
A digital device pursuant to subpart J of Part 15 of FCC Rules, which are designed to
provide reasonable protection against interference when operated in a commercial
environment. Operation of this equipment in a residential area is likely to cause
interference in which case the user at his own expense will be required to take whatever
measures to correct the interference.
Warranty Limits:
Warranty terminates automatically when any person other than the authorized
technicians opens the machine. The user should consult his/her dealer for the problem
happened. Warranty voids if the user does not follow the instructions in application of
this merchandise. The manufacturer is by no means responsible for any damage or
hazard caused by improper application.
About This Manual:
Posiflex has made every effort for the accuracy of the content in this manual. However,
Posiflex will assume no liability for any
technical inaccuracies or editorial or other
errors or omissions contained herein, nor for direct, indirect, incidental, consequential
or otherwise damages, including without limitation loss of data or profits, resulting
from the furnishing, performance, or use of this material.
This information is provided “as is” and Posiflex Inc. expressly disclaims any
warranties, express, implied or statutory, including without limitation implied
warranties of merchantability or fitness for particular purpose, good title and against
infringement.
The information in this manual contains only essential hardware concerns for general
user and is subject to change without notice. Posiflex reserves the right to alter product
designs, layouts or drivers without notification. The system integrator shall provide
applicative notices and arrangement for special options utilizing this product. The user
may find the most up to date information of the hardware from web sites:
http://www.posiflex.com or http://www.posiflex.com.tw
All data should be backed-up prior to the installation of any drive unit or storage
peripheral. Posiflex will not be responsible for any loss of data resulting from the use,
disuse or misuse of this or any other Posiflex product.
All rights are strictly reserved. No part of this documentation may be reproduced,
stored in a retrieval system, or transmitted in any form or by any means, electronic,
mechanical, photocopying, or otherwise, without prior express written consent from
Posiflex Inc. the publisher of this documentation.
©
Copyright Posiflex Inc. 2004
All brand and product names and trademarks are the property of their respective holders.
P/N: 16280901020
Jiva TP/LT- 5700G/5800G
Touch Control Work Station
User’s Manual
Rev. A0
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Part 2 Standard Features: a) CPU: Celeron compatible C3 800 MHz or up for Jiva TP/LT-5700G; C3 1.0GHz for Jiva TP/LT-5800G b) A base design supporting optional UPS battery storage c) Support Win98, Win 2000, Win CE, Win XP Pro and Linux environment for Jiva TP/LT-5800G d) Support Win CE.NET on CF ca...
Part 4 INSTALLATION GUIDES CAUTION: Before any installation or cable connection to the set, please always make certain that the system is turned off and the external power source to the set is removed to prevent electric hazard! Never touch any metal pin in the connectors or circuits to avoid high v...
Part 5 CONNECT/DISCONNECT CABLES After removal of the cable cover, the connector area will be accessible then. Please disconnect every cable before separation of main unit and the adjustable stand assembly. When later the main unit and stand assembly are to be re-assembled for application, please co...
