POSIFLEX 5700G - Manuals

POSIFLEX 5700G – Manual in PDF format online.

Manuals:

Manual

Manual POSIFLEX 5700G

Summary

Page 2 - Vertical type LCD panel with easy tilt

Part 2 Standard Features: a) CPU: Celeron compatible C3 800 MHz or up for Jiva TP/LT-5700G; C3 1.0GHz for Jiva TP/LT-5800G b) A base design supporting optional UPS battery storage c) Support Win98, Win 2000, Win CE, Win XP Pro and Linux environment for Jiva TP/LT-5800G d) Support Win CE.NET on CF ca...

Page 4 - INSTALLATION GUIDES; OPENING CABLE COVER; the stand to the most horizontal position for ease of operation.; Be sure to take the key out of the hole before doing next; Then push the lock/release lever on the base backward to adjust the

Part 4 INSTALLATION GUIDES CAUTION: Before any installation or cable connection to the set, please always make certain that the system is turned off and the external power source to the set is removed to prevent electric hazard! Never touch any metal pin in the connectors or circuits to avoid high v...

Page 5 - CONNECT/DISCONNECT CABLES; Damages due to incorrect; SEPARATING MAIN UNIT

Part 5 CONNECT/DISCONNECT CABLES After removal of the cable cover, the connector area will be accessible then. Please disconnect every cable before separation of main unit and the adjustable stand assembly. When later the main unit and stand assembly are to be re-assembled for application, please co...

Page 6 - OPENING STAND ASSEMBLY

Part 6 applied when later on the main unit and the stand assembly have to be reunited. OPENING STAND ASSEMBLY Take the adjustable stand assembly and turn it up side down to show the bottom of the base. Now, unscrew the 2 screws on the cable passage cover and take the cable passage cover away to show...

Page 7 - ROUTING THE CABLES; On the back of the main unit, there are 4 matching pegs and a service; CAUTION; Risk Of Explosion If Battery Is Replaced By An Incorrect Type; This End to Other Devices

Part 7 Connect the 6 pole plug of CCBLA-238 to “CR” port and connect each 8 pole plug to the connector marked “signal cable from POS Printer” at the rear of one of the cash drawer. In this way, the Jiva series is capable of controlling two cash drawers independently through software command. ROUTING...

Page 8 - INSTALLING UPGRADE KIT; The USB power arrangement in this system has been particularly; WIRELESS PRINTER; The Posiflex wireless connection supports various application

Part 8 required to support the system real time clock. The jumpers in this window are designated for VGA port and COM port power supply function. Please consult your dealer for technical support on setup of these jumpers. A new Lithium battery can support the system RTC for about 3 years. After the ...

Page 9 - JOINING MAIN UNIT AND STAND; Matching Holes

Part 9 Posiflex wireless connection driver elements. The driver can be found together in delivery of the wireless printer or the Posiflex Product Information CD of version 1.9 or above, or please find it on our web http://www.posiflex.com or http://www.posiflex.com.tw JOINING MAIN UNIT AND STAND Mat...

Page 10 - FORMAT.COM shall never be used on CF Card

Part 10 WALL MOUNTING The major part in the wall mounting kit is a bracket as shown in the picture. Screw the bracket against the wall for mounting the Jiva TP/LT-5700G / Jiva TP/LT-5800G in the direction that the wider parts of the matching holes are at the top as shown in the picture below. Align ...

Page 11 - For the Jiva TP/LT-5800G preloaded with Windows XP Pro or Windows; Please use the recovery CD in rescue operation only. Using it; All upgrade devices; OPERATING SYSTEM INSTALLATION; There are an IDE connector and a 4 pin power connector in the I/O

Part 11 the software system on HDD collapses, it is possible to restore the operating system onto a physically intact HDD with use of the Recovery CD that comes with the preloaded operating system. Please follow the instruction from your system integrator for system / software restoration. Follow th...

Page 12 - USING THE TOUCH POS; APPLICATION ENVIRONMENT; Ventilation

Part 12 USING THE TOUCH POS APPLICATION ENVIRONMENT It is very important that you check the following operational guidelines: Ventilation This terminal must NOT be operated in an environment with restricted ventilation. The installation should be such that there is at least 25mm air clearance around...

Page 13 - Battery replacement:; Power Supply

Part 13 well-maintained battery can be expected to provide adequate service for 1 year. Battery replacement: In the power management circuit in this POS system, there is a handy battery monitor feature to help user find out when an UPS battery should be replaced. The battery monitor will always firs...

Page 15 - AUTOMATIC POWER ON; By RTC Alarm preset; DISPLAY RESOLUTION; External LCD Monitor

Part 15 AUTOMATIC POWER ON There are several ways supported by this system to perform an automatic boot up as long as external power is supplied to the system. Procedures for each method are described below. By RTC Alarm preset 1. Preset the system to timely boot up by pressing “Del” key at powering...

Page 16 - SYSTEM PROTECTION; In the Posiflex POS system delivered with preloaded OS, there is a

Part 16 mode dual display function for Win98 or WinXP. To support the DC power to these Posiflex monitor, use the DC adaptor to connect into the monitor or VGA cable or purchase another type of VGA cable and set an internal jumper in Jiva TP/LT-5700G or Jiva TP/LT-5800G to supply the required power ...

Page 17 - TOP MOUNT CUSTOMER DISPLAY; never try to open the cover

Part 17 Please be solemnly alerted that the system restore operation means the irrecoverable erasement of existing data or system setup, it is strongly advised to press “Esc” key to avoid such miserable damage if there is any doubt. Pressing “F4” key at this screen will save the current status of th...

Page 18 - If the system integrator arranges the TP/LT5700G to boot from a; Mouse Emulation; The touch panel in Jiva TP-5700G / Jiva TP-5800G uses either a PS2

Part 18 SOUND PORTS The audio port on Jiva TP/LT-5700G / Jiva TP/LT-5800G supports a Microphone in and a line out jacks. The internal audio output port supports line output signals and requires power amplifier for connection to speaker unless the option of audio amplifier and a pair of slim type spe...

Page 19 - Posiflex Touch Terminal Manager; A program named “Posiflex Touch Terminal Manager” is installed in; RS232 Touch Controller; If the Jiva TP-5700G or Jiva TP-5800G purchased is the leading edge; Removal of this cover will void the product; Once the RS232 touch controller driver is installed, the user can

Part 19 Posiflex Touch Terminal Manager A program named “Posiflex Touch Terminal Manager” is installed in the preloaded Windows system with a PS/2 interface touch panel controller. This program can also be obtained by download from the POSIFLEX web site. This program can be engaged in the program gr...