Polycom ViewStation EX - Manual

Polycom ViewStation EX

Polycom ViewStation EX – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
24 Page 24
25 Page 25
26 Page 26
27 Page 27
28 Page 28
29 Page 29
30 Page 30
31 Page 31
32 Page 32
33 Page 33
34 Page 34
35 Page 35
36 Page 36
37 Page 37
38 Page 38
39 Page 39
40 Page 40
41 Page 41
42 Page 42
43 Page 43
44 Page 44
45 Page 45
46 Page 46
47 Page 47
48 Page 48
49 Page 49
50 Page 50
51 Page 51
52 Page 52
53 Page 53
54 Page 54
55 Page 55
56 Page 56
57 Page 57
58 Page 58
59 Page 59
60 Page 60
61 Page 61
62 Page 62
63 Page 63
64 Page 64
65 Page 65
66 Page 66
67 Page 67
68 Page 68
69 Page 69
70 Page 70
71 Page 71
72 Page 72
73 Page 73
74 Page 74
75 Page 75
76 Page 76
77 Page 77
78 Page 78
79 Page 79
80 Page 80
81 Page 81
82 Page 82
83 Page 83
84 Page 84
85 Page 85
86 Page 86
87 Page 87
88 Page 88
89 Page 89
90 Page 90
91 Page 91
92 Page 92
93 Page 93
94 Page 94
95 Page 95
96 Page 96
97 Page 97
98 Page 98
99 Page 99
100 Page 100
101 Page 101
102 Page 102
103 Page 103
104 Page 104
105 Page 105
106 Page 106
107 Page 107
108 Page 108
109 Page 109
110 Page 110
111 Page 111
112 Page 112
113 Page 113
114 Page 114
115 Page 115
116 Page 116
117 Page 117
118 Page 118
119 Page 119
120 Page 120
121 Page 121
122 Page 122
123 Page 123
124 Page 124
125 Page 125
126 Page 126
127 Page 127
128 Page 128
129 Page 129
130 Page 130
131 Page 131
132 Page 132
133 Page 133
134 Page 134
135 Page 135
136 Page 136
137 Page 137
138 Page 138
139 Page 139
140 Page 140
141 Page 141
142 Page 142
143 Page 143
144 Page 144
145 Page 145
146 Page 146
147 Page 147
148 Page 148
149 Page 149
150 Page 150
151 Page 151
152 Page 152
153 Page 153
154 Page 154
155 Page 155
156 Page 156
157 Page 157
158 Page 158
159 Page 159
160 Page 160
161 Page 161
162 Page 162
163 Page 163
164 Page 164
165 Page 165
166 Page 166
167 Page 167
168 Page 168
169 Page 169
170 Page 170
171 Page 171
172 Page 172
173 Page 173
174 Page 174
175 Page 175
176 Page 176
177 Page 177
178 Page 178
179 Page 179
180 Page 180
181 Page 181
182 Page 182
183 Page 183
184 Page 184
185 Page 185
186 Page 186
187 Page 187
188 Page 188
189 Page 189
190 Page 190
191 Page 191
192 Page 192
193 Page 193
194 Page 194
195 Page 195
196 Page 196
197 Page 197
198 Page 198
199 Page 199
200 Page 200
201 Page 201
202 Page 202
203 Page 203
204 Page 204
205 Page 205
206 Page 206
207 Page 207
208 Page 208
209 Page 209
210 Page 210
211 Page 211
212 Page 212
213 Page 213
214 Page 214
215 Page 215
216 Page 216
217 Page 217
218 Page 218
219 Page 219
220 Page 220
221 Page 221
222 Page 222
223 Page 223
224 Page 224
Page: / 224

Table of Contents:

  • Page 2 – Trademark Information; Patent Information
  • Page 3 – Contents
  • Page 10 – The following table lists the major changes for Release 5.0.; camera near; commands need; button near
  • Page 11 – Accessing the API Interface; Using Telnet
  • Page 12 – panel of the VS4000 system.; ViewStation EX and ViewStation FX; back panel of the system.; Starting a Communications Session; select
  • Page 13 – RS-232 Interface Information; RS-232 User Interface Screen; System; Baud Rate
  • Page 14 – The following information describes; Note; —If the near site is set to
  • Page 15 – Flow Control; Resulting Operation
  • Page 16 – Pin Number
  • Page 18 – Status Display; Using the “listen” or “dial” Command
  • Page 21 – Syntax Summary; gabpassword set MyPassword
  • Page 22 – compound name; About the “get” Subcommand; get; Example 1; Response; gmscountry; Example 2; Response; gmscountry
  • Page 23 – System Commands; Description; history; from the history list.; There is no space between the; Example; The following is a Telnet session sample:
  • Page 24 – Subcommands; abk
  • Page 25 – batch; Examples; abk batch 0; password; adminpassword
  • Page 26 – want to erase the current setting, omit the; adminpassword set MyFXpsswd; User Interface Screen Location; advnetstats
  • Page 27 – Sample Output
  • Page 28 – yes; allowabkchanges get; allowabkchanges
  • Page 29 – allowdialing get; allowdialing
  • Page 30 – allowmixedcalls yes; allowremotemon get; allowremotemon
  • Page 31 – allowusersetup yes; This command answers incoming video or POTS calls.; phone; Answers incoming POTS calls.; video; answer phone; answer
  • Page 32 – Displays the current threshold value of the call.; Displays the current threshold value of the call.
  • Page 33 – autoanswer donotdisturb; autoanswer
  • Page 34 – This command enables or disables the Auto Discover NAT option.; Displays the current setting (; or; autodiscovernat yes; autodiscovernat
  • Page 35 – backlightcompensation no; backlightcompensation
  • Page 36 – auto; button
  • Page 38 – Sends the Zoom in key to the user interface.; This command sends the up arrow command to the user interface.; This valid command combines the following commands:; both; Displays the selected call types.; callpreference
  • Page 39 – Disables the register mode.; Displays the selected call state mode (; register; unregister; callstate register; Output to Example; callstate registered; callstate
  • Page 40 – When you are not in a call, all; camera near move; commands need to be preceded by a; Near camera direction change (start zooming; camera
  • Page 43 – camera far 2; camera1ptz yes; camera1ptz
  • Page 44 – camera4ptz get; camera4ptz
  • Page 45 – cameradirection normal; camerainput
  • Page 46 – camerainput 1 s-video; chaircontrol
  • Page 48 – This command turns the diagnostic color bars on or off.; on; Turns on the color bars.; off; Turns off the color bars.; colorbar on; your locatio; Displays the current setting.; country set; colorbar
  • Page 49 – country set germany; No data conference type is selected.; dataconferencetype netmeeting; dataconferencetype
  • Page 50 – daylightsavings yes; daylightsavings
  • Page 51 – dhcp client; dhcp
  • Page 52 – dial
  • Page 53 – dial addressbook; dialchannels parallel; dialchannels
  • Page 54 – Sets the command. A priority level from the range; diffserv set 0; dir; This command lists flash files. No wild cards are allowed.; string; diffserv
  • Page 55 – This command displays banner information.; display call
  • Page 56 – Ouput; dd; displaybolt 5; displaybolt
  • Page 57 – displayglobaladdresses yes; displaygraphics yes; displayglobaladdresses
  • Page 58 – displayipext yes; displayipext
  • Page 59 – This command outputs the list of all the system settings.; displayparams
  • Page 60 – dns
  • Page 61 – This option can only be set when DHCP is off.; dns get 4; dynamicbandwidth
  • Page 62 – dynamicbandwidth yes; . If you want to erase the current
  • Page 63 – restart system for changes to take effect. Restart; Gateway; not; echocanceller yes; echocanceller
  • Page 64 – enablesnmp yes; enablesnapshots
  • Page 65 – exit; farcontrolnearcamera yes; exit
  • Page 66 – farloop on; farloop
  • Page 67 – farnametimedisplay set; System Info>User Setup: Far Site Name Display; This command displays Global Address Book entries in batches.; gabk batch 9; Displays the current GAB password.; gabk batch
  • Page 68 – gabpassword set gabPass; gabserverip
  • Page 69 – gatekeeperip
  • Page 70 – gatewayareacode set 512; gatewayareacode set; gatewayareacode
  • Page 71 – This command sets the gateway country code.; gatewaycountrycode set 1; gatewaycountrycode
  • Page 72 – parameter. If you want to erase; gatewayext set; gatewayext
  • Page 73 – gatewaynumber set; gatewaynumber
  • Page 74 – did; gatewaynumbertype number+extension; gatewaynumbertype
  • Page 75 – valid speed; Sets the gateway prefix when followed by the; gatewayprefix
  • Page 76 – This command lists all the available speeds at once.; Output; gatewaysetup
  • Page 77 – Sets the gateway suffix when followed by the; gatewaysuffix
  • Page 78 – This command generates DTMF dialing tones to POTS line.; Turns on the test tone.; Turns off the test tone.; gendial
  • Page 79 – get screen; Output Example; CGenToneScreen; This command sets the GMS city information.; get screen
  • Page 80 – gmscity set Paris; This command sets the GMS contact E-mail information.; gmscontactemail set [email protected]; Info 1: Contact Email; gmscontactemail
  • Page 81 – This command sets the GMS contact fax information.; gmscontactfax
  • Page 82 – gmscontactnumber set; gmscontactnumber
  • Page 83 – gmscontactperson set; gmscontactperson
  • Page 84 – This command sets the GMS country information.; gmscountry set Argentina
  • Page 85 – This command sets the GMS state information.; Sets the GMS state information when followed by the; parameter. If you want to erase the current; Displays the current state information.; state; Character string specifying the state information.; gmsstate set Texas; gmsstate
  • Page 86 – gmstechsupport set; gmstechsupport
  • Page 87 – parameter. If you want to; must be; gmsurl get 1; Output to Example 2; gmsurl
  • Page 88 – graphicsmonitor fxvga; graphicsmonitor
  • Page 89 – graphicsmonitorfxvga on; graphicsmonitorfxvga
  • Page 90 – graphicsmonitortv on; graphicsmonitorvisualconcert on; graphicsmonitorvisualconcert
  • Page 91 – Sets the H.323 name when followed by the; Displays the current setting for this option.; My System
  • Page 92 – hangup phone; hangup video 2; help; syntax; hangup
  • Page 93 – Displays detailed help for all commands.
  • Page 94 – This command sets the high-resolution state for camera 2 or 3.; Enables high-resolution mode for the selected camera.; Displays the current state for the selected camera (; hires
  • Page 96 – hostname
  • Page 97 – hostname set MySystem; hostname set; hostname ADMIN; ipaddress
  • Page 98 – ipdialspeed
  • Page 99 – Sets the IP precedence. A priority level from the range; ipprecedence
  • Page 100 – LAN & Intranet: all information displayed on this screen; ipstat
  • Page 101 – Enables audio confirmation.; keypadaudioconf yes; keypadaudioconf
  • Page 102 – language set german; lanport auto; lanport
  • Page 103 – lanstat
  • Page 104 – lanstat min 1; Output to Example 1; Port 0; lanstat misc; Miscellaneous LAN Counters:
  • Page 105 – listen sleep; listen sleep registered; listen
  • Page 106 – listen waking up; maxgabinternationalcallspeed get; Displays the current valid speed.; maxgabinternationalcallspeed set 512; maxgabinternationalcallspeed
  • Page 107 – valid; maxgabinternetcallspeed get; maxgabinternetcallspeed set 384; maxgabinternetcallspeed
  • Page 108 – maxgabisdncallspeed get; maxgabisdntcallspeed set 384; maxgabisdncallspeed
  • Page 109 – . If you want to erase the; maxtimeincall set 180; System Info>Admin Setup>General Setup: Maximum Time in a Call; maxtimeincall
  • Page 110 – Use quotation marks around a compound name or strings; Note 2; ViewStation EX: this multipoint option is not available; This command sends the MCU password; mcupassword
  • Page 111 – This command sets the meeting password.; meetingpassword set EXpasswd; meetingpassword
  • Page 112 – ViewStation EX User Guide; mpautoanswer donotdisturb; mpautoanswer
  • Page 113 – System Info>Admin Setup>General Setup: Auto Answer Multipoint; In Presentation mode (also called voice-activated; mpmode discussion; mpmode
  • Page 114 – mute near on; mute
  • Page 115 – muteautoanswercalls yes; System Info>User Setup: Mute Auto Answer Calls; muteautoanswercalls
  • Page 116 – Disables the Near End Loop.; nearloop on; netmeetingip
  • Page 117 – netstats; netstats
  • Page 118 – numdigitsdid 7; numdigitsdid
  • Page 119 – Range of allowed digits.; numdigitsext 10; numdigitsext
  • Page 120 – numberofmonitors 2; numberofmonitors
  • Page 121 – outboundcallroute gateway; Maximum length of pause is 65535 seconds.; pause 3; This command sets the PC port speed of the system.; pause
  • Page 122 – testlan ping; ping
  • Page 123 – pip auto; pip
  • Page 124 – switchnumber; fulldidnumber, switchnumber; preferredalias isdnnumber; Select this field to access the; preset
  • Page 125 – Disables register mode.; preset near set 2; if the; primarycallchoice
  • Page 126 – primarycallchoice isdn; primarycamera 1; primarycamera
  • Page 127 – queuecommands yes; queuecommands
  • Page 128 – Disables this option.; from the preceding history list.; repeat
  • Page 129 – You must use; requireacctnumtodial yes; Setup: Require Account Number to Dial; requireacctnumtodial
  • Page 130 – Sets the room phone number when followed by the; room phone number; roomphonenumber
  • Page 131 – Displays the current mode setting (; rs232 flowcontrol hardware
  • Page 132 – Goes to the Address Book screen.; run
  • Page 133 – screen sysinfo; secondarycallchoice isdn; secondarycallchoice
  • Page 134 – serialnum; This command displays the serial number of the system.; sendonlypreferredalias
  • Page 135 – on page; account number; Number that is needed to validate the account; setaccountnumber
  • Page 136 – Displays both ISDN and IP numbers in the GAB.; showaddrsingab both; Preferences: Show Addresses in Address Book; This command displays a popup message box in the user interface.; text to display; showpopup
  • Page 137 – sleep; ViewStation FX/VS4000 User Guide; sleep
  • Page 138 – slides select presPC; snapshot
  • Page 139 – Unregisters the Telnet or RS-232 session to receive; snapshot 1; snapshotcamera 1; snapshotcamera
  • Page 140 – he remote control to return; snapshottimeout no; snapshottimeout
  • Page 141 – This command sets the SNMP administrator name.; snmpadmin set; snmpadmin
  • Page 142 – This command sets the SNMP community name.; snmpcommunity set Public; snmpcommunity
  • Page 143 – snmpconsoleip
  • Page 144 – snmplocation set; soundeffectsvolume set 6; soundeffectsvolume
  • Page 145 – stdout on; start; stream start; stdout
  • Page 146 – Enables streaming announcement.; streamannounce yes; streamannounce
  • Page 147 – stream audio; Sets the stream audio port when followed by the; streamaudioport
  • Page 148 – This command enables or disables streaming on the system.; streamenable yes; Sets the multicast IP address when followed by the; streamenable
  • Page 149 – ip address; Multicast IP address.; streammulticastip get; Output Sample; streamrouterhops 1; streamrestoredefaults
  • Page 150 – number router; Sets the number of routers when followed by the; number router hops; streamrouterhops set 1; streamrouterhops
  • Page 151 – streamspeed
  • Page 152 – subnetmask
  • Page 153 – systembehindnat yes; systembehindnat
  • Page 154 – Sets the system name. It must be followed by the; Displays the current system name.; system name; The name can be up to 34 characters in length.; systemname set MyOwnFX; systemname
  • Page 155 – Sets the t120 name or IP address when followed by the
  • Page 156 – Displays the current TCP port setting.; tcpports
  • Page 157 – techsupport; teleareacode
  • Page 158 – Sets the telephone country code when followed by the; telecountrycode set 33; telecountrycode
  • Page 159 – This command sets the system’s telephone number.; Sets the telephone number when followed by the; parameter. If you want to erase the; telephone number; System’s telephone number.; telenumber
  • Page 160 – This command displays miscellaneous DCU information.; testlan arp
  • Page 161 – This command looks up a domain name or an IP address.; name or ip; Domain name or IP address.; testlan dns
  • Page 163 – count
  • Page 164 – text to input; ocal time of the managed; textinput
  • Page 165 – typeofservice diffserv; typeofservice
  • Page 166 – usefixedports yes; usefixedports
  • Page 167 – This command selects the gatekeeper mode (; usegatekeeper specify; usegatekeeper
  • Page 168 – usepathnavigator required; usepathnavigator
  • Page 170 – validateacctnum yes; validateacctnum
  • Page 171 – vcbutton play; Enables the option; vcraudioout yes; vcraudioout
  • Page 172 – vcrrecordsource auto; version; vcrrecordsource
  • Page 173 – vgahorizpos right; vgahorizpos
  • Page 174 – vgaoffmode nosignal; This command is used to calibrate the VGA input phase.; vgaphase decrease; vgaphase
  • Page 175 – up; Moves the calibration frame up.; vgaresolution
  • Page 176 – vgavertpos down; volume
  • Page 177 – This command is useful within script files (see the; command on; callcomplete; waitfor callcomplete; waitfor
  • Page 178 – wake; This command sets the WAN IP address.; Sets the WAN IP address when followed by the; Displays the WAN IP address.; wake
  • Page 179 – display whoami; whoami
  • Page 180 – widescreenvideo yes; winsresolution no; winsresolution
  • Page 181 – Displays the WINS server setting.; winsserver
  • Page 182 – ISDN BRI Commands; Sets the ISDN area code when followed by the; isdnareacode
  • Page 183 – isdncountrycode set 1; isdncountrycode
  • Page 184 – Sets the ISDN prefix when followed by the; isdndialingprefix set 9; isdndialingprefix
  • Page 185 – isdndialspeed set 256 on; isdndialspeed
  • Page 186 – isdn number; you want to erase the current setting, omit; isdn; isdnnum
  • Page 187 – may; spid number; want to erase the current setting, omit; spid; spidnum
  • Page 188 – ISDN PRI Commands; This command sets the PRI area code.; Sets the PRI area code when followed by the; area code; parameter. If you want to erase the current setting, omit; area code; Numeric string specifying the area code.; priareacode
  • Page 189 – Sets PRI call-by-call when followed by a value from; pricallbycall set 1; pricallbycall
  • Page 190 – prichannel set all on; prichannel
  • Page 191 – prichannel set; Example 3; prichannel get 3; Dedicated full PRI T1 or E1 Line:
  • Page 192 – screen numbers these channels; Sets the internal CSU mode. This is the default.; pricsu external; pricsu
  • Page 193 – want to erase the current setting, omit the parameter.; range is; pridialchannels set 3; pridialchannels
  • Page 194 – prefix; priintlprefix set 011; PRI Setup>Advanced PRI Setup: International Dialing Prefix; priintlprefix
  • Page 195 – or from; PRI Setup: Line Buildout; prilinebuildout
  • Page 196 – prilinesignal set esf/b8zs; prilinesignal
  • Page 197 – This command sets the PRI video number.; pri number; prinumber
  • Page 198 – prinumberingplan isdn; prinumberingplan
  • Page 199 – erase the current setting, omit the parameter.; prioutsideline set 9; prioutsideline
  • Page 200 – is the default. It is the standard; Sets the PRI switch. A parameter from; Displays the current switch protocol.; priswitch set norteldms; PRI Setup: Switch Protocol; priswitch
  • Page 201 – cts normal; CTS; cts
  • Page 202 – dcd inverted; dcdfilter on; dcdfilter
  • Page 203 – dsr get; dsr
  • Page 204 – dsranswer on; dtr get; DTR; dtr
  • Page 205 – Same as; Turns the audio mode off.
  • Page 207 – Standard video protocol used to transmit video.; Broadcast Mode Setup: Video Protocol
  • Page 208 – connection to the far
  • Page 209 – Displays the current setting for this option (; rt inverted; RT; rt
  • Page 210 – rts normal; RTS; st get; ST; st
  • Page 211 – Enables broadcast mode.; v35broadcastmode on; RS-366 network interface connected to your system.; v35broadcastmode
  • Page 212 – v35dialingprotocol
  • Page 213 – nomenclature of the user interface and the command
  • Page 214 – lists all
  • Page 215 – value; Displays the current setting for; This command associates the dialing prefix 005 to the speed 112.; Advanced Dialing
  • Page 216 – Displays the current profile.; view; Selects; v35profile view; This example assumes
  • Page 218 – This command associates the dialing suffix #4#2 to the speed 128.
  • Page 219 – Safety and Legal Notices; Important Safeguards; License Restrictions
  • Page 220 – Warranty; FCC Notice
  • Page 222 – EEA Regulatory Notices
  • Page 224 – Underwriters Laboratories Statement
Loading the manual

ViewStation

®

EX, ViewStation

FX, and VS4000 API Guide

VS4000 User’s Guide

April 2003 Edition

Release 5.0

1725-10656-004

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Trademark Information; Patent Information

Trademark Information Polycom®, the Polycom logo design, and ViewStation® are registered trademarks of Polycom Inc. ARENA™, Global Management System™, PathNavigator™, Polycom OneDial™, and Visual Concert™ are trademarks of Polycom, Inc. in the United States and various other countries. Internet Expl...

Page 3 - Contents

© Polycom, Inc. 2003 i Contents ........................................................................................................... i What’s New in Release 5.0? ............................................................................ 2 Accessing the API Interface ...........................

Page 10 - The following table lists the major changes for Release 5.0.; camera near; commands need; button near

ViewStation EX, ViewStation FX, and VS4000 API Guide 2 www.polycom.com What’s New in Release 5.0? The following table lists the major changes for Release 5.0. Type of Command Command Change system allowmixedcalls new command audioqualityg7221 new command camera near move When you are not in a call: ...

Other Polycom Models

All Polycom Other