Polycom 1725-22886-001/A - Manuals

Page 2 - Trademark Information; Patent Information

Trademark Information Polycom® and the Polycom logo design are registered trademarks of Polycom, Inc. Polycom Instructor™ RP , PowerCam™, and VSX™ are trademarks of Polycom, Inc. in the United States and various other countries. All other brand and product names are trademarks or registered trademar...

Page 3 - About this Guide

iii About this Guide Now that you’ve received your Polycom Instructor™ RP , you’ll probably want to set it up and start enjoying its functionality as soon as possible. This document, Setting Up the Polycom Instructor RP , explains how to unpack the system, connect the equipment, calibrate it, and pe...

Page 5 - Contents

v Contents Unpack and Position the System . . . . . . . . . . . . . . . . . . . . . . . . . 1–2Prepare to Install the Equipment . . . . . . . . . . . . . . . . . . . . . . . . . 1–3Connect the Standard Equipment . . . . . . . . . . . . . . . . . . . . . . . . 1–5Connect the Optional Equipment . . . ...

Page 8 - Unpack and Position the System

Setting Up the Polycom Instructor RP 2 Unpack and Position the System Work with another person to unpack the Polycom Instructor RP system. To perform this step, follow the instructions in Unpacking the Rear Projection SMART Board Interactive Whiteboard that is attached to the outside of the crate. W...

Page 9 - Prepare to Install the Equipment

Prepare to Install the Equipment 3 Prepare to Install the Equipment Open the front doors of the cabinet and remove the accessory boxes and the video conferencing shelf. You should find these accessory boxes: Remove the shipping strap that secures the small mirror. The buckle of the shipping strap is...

Page 11 - Connect the Standard Equipment

Connect the Standard Equipment 5 Connect the Standard Equipment Connect the PowerCam Plus to the Polycom Instructor RP . 1. Place the PowerCam Plus on the video conferencing shelf. 2. Connect one end of the PowerCam Plus cable to the VSX 8000 system as described in the Polycom Setting Up the VSX 800...

Page 12 - Connect the Optional Equipment

Setting Up the Polycom Instructor RP 6 Connect the Optional Equipment Connect a document camera or another S-video device, such as an auxiliary PowerCam, to the Polycom Instructor RP . 1. Place the document camera or other S-video device wherever you want to locate it. 2. Find the S-video cable in t...

Page 15 - Complete the Equipment Installation

Complete the Equipment Installation 9 Complete the Equipment Installation Connect the IR receiver for the wireless keyboard to the Polycom Instructor RP system. 1. Find the IR receiver in the back of the Polycom Instructor RP system. The cable for the receiver is already connected to the system. 2. ...

Page 16 - Power on the System

Setting Up the Polycom Instructor RP 10 Power on the System Connect the external power cord to a power outlet. Power on the standard and optional equipment. • Open the front doors of the cabinet and power on the annotation box. • Power on the VSX 8000. • Power on any other equipment you have, such a...

Page 17 - Check the Screens and Run the Wizard

Check the Screens and Run the Wizard 11 Check the Screens and Run the Wizard Make sure the Welcome screen image is centered properly on the screen. If you need to adjust the projected image, follow the instructions in the “Adjusting the Projected Image” section of the Rear Projection SMART Board 300...

Page 18 - Near; Camera

Setting Up the Polycom Instructor RP 12 Make fine adjustments to the projector, if needed . To perform this step: 1. Select full-screen video by pressing Near on the Polycom remote control. 2. Make the fine adjustments to the projector by following the instructions the “Adjusting the Projected Image...

Page 21 - Install the Software and Complete the Calibration; SMART Board

Install the Software and Complete the Calibration 15 Install the Software and Complete the Calibration If you have an integrated computer connected to your Polycom Instructor RP system, install the Polycom Instructor Tools software on it. If you do not have an integrated computer, skip this step.The...

Page 22 - Configure and Use the System

Setting Up the Polycom Instructor RP 16 Configure and Use the System Configure the VSX 8000 video conferencing system. To perform this step, follow the instructions in the Polycom Administrator’s Guide for the VSX Series . Use the Polycom Instructor RP system. • For quick tips on common video confer...

Page 23 - Troubleshooting

Troubleshooting 17 Troubleshooting The Polycom Administrator’s Guide for the VSX Series contains troubleshooting information that can help you identify and correct issues associated with the VSX 8000 and the accessories connected to it.The Rear Projection SMART Board 3000i Installation Guide contain...