Polycom DOC2567A - Manual
Polycom DOC2567A – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Installation Quick Start Guide for
RMX 4000
Basic Setup
Modifying the USB Key Settings
1
Insert
the
USB key
provided with your system
into the PC workstation and double-
click
LanConfigUtility.exe
to start the utility.
2
Modify the parameters in the utility’s dialog box using the information supplied by
your network administrator.
3
Click
OK
.
4
Remove it from the PC.
First-time Power-up and Connection to MCU
1
Insert the
USB key
containing the modified IP addresses in the USB port on the
RMX’s back panel.
2
Power the RMX
ON
.
The parameters in the
lan.cfg
file are uploaded from the USB key to the RMX’s
memory and applied during the power-up sequence.
System power-up sequence may take up to
five
minutes.
During the first-time power-up the red ERR LED on the RMX’s front panel remains
ON until both the
Management
and
IP Network Services
have been defined.
3
Remove the
USB key.
4
5
6
.
Before installing the RMX 4000 and performing the Basic Setup, please read the
General Safety Precautions described in the
Polycom RMX 4000 Hardware Guide
.
For a detailed description of Unpacking and Rack mounting instructions, and
connecting a DC system
, see the
Polycom RMX 4000 Hardware Guide
.
MPM+ Cards & LEDs
Fan Drawer
Power Supply Drawers
and Status LEDs
Control Unit
(CNTL 4000) &
LEDs
Optional CPU
(Future)
Fan &
Power
Status
LEDs
Fabric Switch
Module
(FSM 4000)
Logo Panel &
ESD Connector
LAN Connections to Port 2 on each RTM LAN
LAN Connections to Port 1 on RTM ISDN
Power Cables
Off/On
Switch
E1/T1 Connection to RTM ISDN
Shelf
Management
(Port 6 on
RTM IP)
Management
Network
(Port 2)
Signalling
Network
(Port 3)
•
Two people are required to lift the MCU out of the box and when installing it in a
rack.
•
LAN 4, LAN 5 and the Serial ports are only for debugging and not for customer
use.
•
Do not remove the protective plastic caps from LAN 1, LAN 4 and LAN 5 ports.
Enter the IP address of the RMX Control Unit and press Enter.
Enter POLYCOM.
Enter POLYCOM.
Click
Login
.
Click to connect to Polycom
web site and register the
RMX.
Click
Product Registration
and follow the on screen
instructions to obtain the
Product Activation Key
.
Enter or paste the
Product
Activation Ke
y obtained.
Click
OK
.
RMX
®
4000
1
DOC2567A
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
