Pioneer MVH S420BT - User Manual
Pioneer MVH S420BT – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – After the “SYSTEM INFO” screen appears, check the firmware version.; Downloading the Firmware Update File; USB memory device requirements:; MODEL
- Page 3 – D. Updating the Firmware on Your Unit; The update process takes approximately 6 minutes to complete.
- Page 4 – to check if the firmware has been
System Firmware Update Instructions
for 2020 Pioneer CD Receivers
REMARKS:
If you have any difficulty carrying out these instructions, please contact Pioneer
Customer Support. Once upgraded to this version, it is not possible to downgrade to a
lower version.
Please download and print these instructions before downloading and installing the
firmware update. It is important that you complete all steps correctly and in the order
described below.
This update applies only to the following models and which are sold in Europe:
DEH-S720DAB
MVH-S620BT
FH-S820DAB
DEH-S520BT
MVH-S520DAB
FH-S720BT
DEH-S420BT
MVH-S520BT
DEH-S42BT
MVH-S420DAB
DEH-S320BT
MVH-S420BT
MVH-S42BT
MVH-S320BT
A.
Check the current firmware version of the unit
PROCEDURE:
1.
Start the vehicle engine.
2.
If AV Source is On, Press and hold the [SRC/OFF] button to switch off the source.
3. Press and hold SRC/OFF to display the Initial menu. Next press the Multi Control to confirm.
4.
Rotate the Multi Control to select “SYSTEM UPDATE”, then press to confirm.
5.
Select the “SYSTEM INFO” to confirm the system info.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Pioneer MVH S420BT
Summary
6. After the “SYSTEM INFO” screen appears, check the firmware version. If the version number is 8.11 or higher, it is not necessary to update the firmware. If the version number is lower than 8.11, it is necessary to update the firmware. Please continue to Step B. B. Downloading the Firmware Update ...
D. Updating the Firmware on Your Unit REMARKS: Please DO NOT perform this firmware update if the model number of your Pioneer unit is anything other then the above listed models. While your unit is being updated, DO NOT turn off the system’s power, DO NOT touch the unit’s buttons, DO NOT remove ...
9. Wait until the update procedure completes. (approx. 5 minutes) 10. The product will reboot after the update is finished. Do not touch anything even when the screen is blacked out. After it has finished rebooting, the screen will return to the menu screen. 11. The firmware update is now complete. ...
