Page 2 - Getting Started; Basic operation
- 3 - - 3 - MVH-S322BT/S320BT Optional remote control The remote control CD-R510 is sold separately. Frequently used operations Getting Started Basic operation Purpose Operation Turn on the power* Press SRC/OFF to turn on the power. Press and hold SRC/OFF to turn off the power. Adjust the volume Tur...
Page 3 - Display indication; Detaching the front panel; Detach
- 4 - * When this unit’s blue/white lead is connected to the vehicle’s auto-antenna relay control terminal, the vehicle’s antenna extends when this unit’s source is turned on. To retract the antenna, turn the source off. Display indication Detach the front panel to prevent theft. Remove any cables a...
Page 4 - Resetting the microprocessor; RESET
- 5 - - 5 - The microprocessor must be reset in the following situations: – Before using this unit for the first time after installation– If the unit fails to operate properly– When strange or incorrect messages appear on the display 1 Remove the front panel (page 4). 2 Press the RESET button with a...
Page 6 - To seek a station manually; To store stations manually; Radio; Receiving preset stations
- 7 - - 7 - The tuner frequencies on this unit are allocated for use in North America. Use in other areas may result in poor reception. 1 Press SRC / OFF to select [RADIO]. 2 Press BAND / to select the band from [FM1], [FM2], [FM3] or [AM]. 3 Press a number button ( 1 / to 6 / ). TIP The / buttons c...
Page 7 - CAUTION; AUX; Playing back
- 8 - (iPhone source is not available when [USB MTP] is set to [ON] in the SYSTEM settings (page 26).) Disconnect headphones from the device before connecting it to the unit. USB devices (including Android™)/iPhone 1 Open the USB port cover. 2 Plug in the USB device/iPhone using an appropriate cable...
Page 8 - Operations
- 9 - - 9 - 2 Press SRC / OFF to select [AUX IN] as the source. NOTE If [AUX] is set to [OFF] in the SYSTEM settings, [AUX IN] cannot be selected as a source (page 25). You can make various adjustments in the FUNCTION settings (page 21) (except for AUX IN/USB source).Note that the following operatio...
Page 9 - Bluetooth; Bluetooth connection
- 10 - • Depending on the file/song, sound effects may not be available. 1 Press 3 / MIX to turn MIXTRAX on/off. Important If ten or more Bluetooth devices (e.g. a phone and separate audio player) are connected, they may not work properly. TIP The next connection to the unit is performed automatical...
Page 10 - To make a phone call; Basic operations
- 11 - - 11 - Important • Leaving the unit on standby to connect to your phone via Bluetooth while the engine is not runningcan drain the vehicle’s battery. • Be sure to park your vehicle in a safe place and apply the parking brake before operation. To make a phone call 1 Press to display the phone ...
Page 12 - Bluetooth audio
- 13 - - 13 - * If two phones are connected, this function does not work on incoming calls that are received while one of the phones is being used for a call. Important • Depending on the Bluetooth audio player connected to this unit, the available operations will be limited to the following two lev...
Page 13 - Pandora®; Listening to Pandora
- 14 - * Depending on the connected device, these operations may not be available. Update the firmware of the Pandora application to the latest version before use. 1 Connect this unit with the mobile device. • iPhone via USB (page 8) • iPhone/Android device via Bluetooth (page 10) 2 Press SRC/OFF to...
Page 14 - Spotify®
- 15 - - 15 - NOTE When you connect a mobile device other than an iPhone/Android device, it may not operate correctly depending on your mobile device. Basic operations You can make various adjustments in the FUNCTION settings (page 21). NOTE Some functions of Pandora may not be operated from the uni...
Page 15 - Listening to Spotify
- 16 - To enjoy Spotify as you drive, first download the Spotify app to your iPhone or Android device. You can download it on the iTunes® App Store® or Google Play™. Choose a free account or a paid Premium account, either in the app or at spotify.com. A Premium account gives you more features, like ...
Page 16 - WARNING; Using Pioneer Smart Sync/APP
- 17 - - 17 - NOTE Some functions of Spotify may not be operated from the unit. Pioneer Smart Sync is the application that intelligently brings your maps, messages, and music together in the vehicle.You can operate the unit from Pioneer Smart Sync installed on an iPhone/Android device. In some cases...
Page 17 - What kind of function does the application have?; Promoting the use of the unit
- 18 - You can download Pioneer Smart Sync on iTunes App Store. For Android device users For Bluetooth connections, this function is compatible with devices that have Android OS 5.0 or later installed.For USB connections, this function is compatible with a phone that runs Android 5.0 or later up to ...
Page 18 - Extending the functions of the unit by using the application; Making a connection with Pioneer Smart Sync
- 19 - - 19 - – Listening to the music on your iPhone/Android device– Controlling the sound field intuitively– Controlling your connected Bluetooth device Extending the functions of the unit by using the application The following functions, which are unavailable on the unit alone, are available by m...
Page 19 - Listening to music on your device; Audio Adjustments
- 20 - 5 Turn the M.C. dial to select [AUTO APP CONN], then press to confirm. 6 Turn the M.C. dial to select [ON], then press to confirm. 7 Connect this unit with the mobile device. • iPhone/Android device via USB (page 8) • iPhone/Android device via Bluetooth (page 10) Pioneer Smart Sync on the dev...
Page 20 - Settings; FUNCTION settings
- 21 - - 21 - 2 Turn the M.C. dial to select [AUDIO], then press to confirm. 3 Turn the M.C. dial to select [CROSSOVER], then press to confirm. 4 Turn the M.C. dial to select the speaker unit (filter) to be adjusted, then press to confirm. 5 Turn the M.C. dial to select [HPF] or [LPF] according to t...
Page 21 - AUDIO settings
- 22 - NOTE [CHK APP SETTG.] may be displayed when the setting is performed from Pioneer Smart Sync. LOCAL FM: [OFF], [LV1], [LV2], [LV3], [LV4] AM: [OFF], [LV1], [LV2] Restrict the tuning station according to the signal strength. SEEK [MAN], [PCH] Assign or buttons to seek the stations one by one (...
Page 24 - SYSTEM settings
- 25 - - 25 - *1 Not available when [SUB.W/SUB.W] is selected in [SP-P/O MODE] in the INITIAL settings (page 6).*2 Not available when [REAR/REAR] is selected in [SP-P/O MODE] in the INITIAL settings (page 6). You can also access to these menus when the unit is turned off. S.RTRV [1] (effective for l...
Page 25 - Information on the connections for each device
- 26 - Information on the connections for each device The available sources differ depending on the setting value.Please set [APP CONTROL] according to the table for the source you want to use.For details on Pioneer Smart Sync connection, see page 17. PANDORA [ON], [OFF] Set to [ON] when using the P...
Page 26 - ILLUMINATION settings
- 27 - - 27 - When Pioneer Smart Sync connection is NOT performed When Pioneer Smart Sync connection is performed Setting Value Device Available source(s) [WIRED] iPhone iPhone, PANDORA, SPOTIFY Android USB (AOA) [BLUETOOTH] iPhone iPhone, PANDORA, SPOTIFY Android PANDORA, SPOTIFY Setting Value Devi...
Page 28 - Common; Additional Information; Troubleshooting
- 29 - The display automatically returns to the normal display. → No operations have been made for about 30 seconds.– Perform an operation. The repeat play range changes unexpectedly. → Depending on the repeat play range, the selected range may change when another folder or track is being selectedor...
Page 29 - Bluetooth device
- 30 - SKIPPED → The connected USB device contains DRM protected files.– The protected files are skipped. PROTECT → All the files on the connected USB device are embedded with DRM.– Replace the USB device. N/A USB → The connected USB device is not supported by this unit.– Disconnect your device and ...
Page 30 - Pandora
- 31 - Pandora ERROR-19 → Communication failed.– Disconnect the cable from the device. Once the device’s main menu is displayed, reconnect the device and reset it. NOT FOUND → The Pandora application has not startedrunning yet.– Start up the Pandora application. RATING ERROR → The thumb rating opera...
Page 31 - APP; USB storage device; Handling guidelines
- 32 - DISCONNECTED PRESS BAND KEY TO RETRY → Bluetooth connection lost.– Press BAND / to make a connection again. STATION LIMIT → A new station cannot be added.– Delete an old station to open a spot for a new one. CANNOT DELETE → The station could not be deleted.– Run the same command for another s...
Page 32 - WMA files
- 33 - – Files may not be played back properly.– The device may cause audible interference when you are listening tothe radio. iPhone • Do not leave the iPhone in places with high temperatures. • Firmly secure the iPhone when driving. Do not let the iPhone fall onto the floor, where it may become ja...
Page 33 - Example of a hierarchy; iPhone compatibility; Sequence of audio files
- 34 - FLAC files • FLAC file formats cannot be connected via MTP. • FLAC files may not be playable, depending on the encoder. USB device • There may be a slight delay when starting playback of audio files on a USB storage device with numerous folder hierarchies. This unit supports only the followin...
Page 34 - Copyright and trademark
- 35 - Bluetooth The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by PIONEER CORPORATION is under license. Other trademarks and trade names are those of their respective owners. iTunes Apple and iTunes are trademarks of Apple Inc., r...
Page 35 - General; Specifications
- 36 - Please note that the use of this accessory with an Apple product may affect wireless performance.iPhone and Lightning are trademarks of Apple Inc., registered in the U.S. and other countries. Siri® Works with Siri through the microphone. Google™, Google Play, Android Google, Google Play and A...
Page 36 - Learn more about
- 37 - Slope: –6 dB/oct, –12 dB/oct, –18 dB/oct, –24 dB/oct, OFF Subwoofer/Low pass filter: Frequency: 25 Hz/31.5 Hz/40 Hz/50 Hz/63 Hz/80 Hz/100 Hz/125 Hz/160 Hz/200 Hz/250 HzSlope: –6 dB/oct, –12 dB/oct, –18 dB/oct, –24 dB/oct, –30 dB/oct, –36 dB/oct, OFFPhase: Normal/Reverse Speaker level: +10 dB ...
