Page 3 - After you have finished reading the instructions, keep this man-; Contents
Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operateyour model properly. After you have finished reading the instructions, keep this man- ual in a safe place for future reference. Before You Start About this unit 5 – Operating en...
Page 5 - About this unit; CAUTION; About WMA; Before
If you want to dispose this product, do not mixit with general household waste. There is a se-parate collection system for used electronicproducts in accordance with legislation that re-quires proper treatment, recovery and recy-cling. Private households in the member states ofthe EU, in Switzerland...
Page 6 - About Bluetooth; Operating environment; Visit our website; Visit us at the following site:; In case of trouble; If the unit fails to operate properly
About Bluetooth Bluetooth is a short-range wireless radio con-nectivity technology that is developed as acable replacement for mobile phones, hand-held PCs and other devices. Bluetooth oper-ates in 2.4 GHz frequency range and transmitsvoice and data at speeds up to 1 megabit persecond. Bluetooth was...
Page 7 - Removing the front panel
Protecting your unit fromtheft The front panel can be detached to deter theft. ! If the front panel is not detached from thehead unit within five seconds of turning offthe ignition, a warning tone sounds. ! You can turn off the warning tone. See Switching the warning tone on page 41. Important ! Han...
Page 8 - Head unit; Press to select different displays.; c b; Operating this unit
What ’ s What Head unit 1 SRC/OFF button This unit is turned on by selecting a source.Press to cycle through all the availablesources. 2 DISP/SCROLL button Press to select different displays. 3 OPEN button Press to open the front panel. 4 LIST button Press to display the track title list, folder lis...
Page 9 - Display indication; Setting; Operating
d PHONE/ /CONNECT button Press to select the phone as the source.While operating a phone source, press toend a call, reject an incoming call or cancelmaking a call.Press and hold to perform Bluetooth con-nection. Display indication 1 Main display section Displays band, frequency, elapsed playbacktim...
Page 10 - Basic Operations; Turning the unit on; Press SRC to turn the unit on.; Turning the unit off; Press OFF and hold until the unit turns; Selecting a source; Press SRC repeatedly to switch be-
k (missed call) indicator Appears when there are missed call log.Appears when missed call list is displayedwhile telephone source is being selected. Basic Operations Power ON/OFF Turning the unit on % Press SRC to turn the unit on. Turning the unit off % Press OFF and hold until the unit turns off. ...
Page 11 - Adjusting the volume; Turn MULTI-CONTROL to adjust the; Tuner; Select a band; Push; Preset screen is displayed.
Adjusting the volume % Turn MULTI-CONTROL to adjust the sound level. Tuner Basic Operations % Select a band Press BAND/ESC . # Band can be selected from among FM1 , FM2 , FM3 or MW/LW . % Manual tuning (step by step) Push MULTI-CONTROL left or right. % Seek tuning Push and hold MULTI-CONTROL left or...
Page 12 - Receiving PTY alarm broadcasts; Tuning in strong signals; Introduction to advanced operations
3 Use MULTI-CONTROL to select the de- sired station. Turn to change the station. Press to select. # You can also change the station by pushing MULTI-CONTROL up or down. # To return to the ordinary display, press BAND/ESC or LIST . # If you do not operate the list within about 30 seconds, the display...
Page 13 - Selecting alternative frequencies; Using PI Seek; Switching Auto PI Seek
3 Press MULTI-CONTROL to turn local seek tuning on. # To turn local seek tuning off, press MULTI-CONTROL again. 4 Push MULTI-CONTROL left or right to set the sensitivity. FM: LEVEL 1 — LEVEL 2 — LEVEL 3 — LEVEL 4 MW/LW: LEVEL 1 — LEVEL 2 The LEVEL 4 setting allows reception of only the strongest sta...
Page 14 - Receiving traffic announcements; Using PTY functions; Using news program interruption
Receiving traffic announcements TA (traffic announcement standby) lets you re-ceive traffic announcements automatically, nomatter what source you are listening to. TAcan be activated for both a TP station (a sta-tion that broadcasts traffic information) or anenhanced other network ’ s TP station (a ...
Page 15 - PTY list
# A news program can be canceled by pressing NEWS . Note You can also turn on or off news programs in themenu that appears by using MULTI-CONTROL . PTY list General Specific Type of program NEWS/INFO NEWS News AFFAIRS Current affairs INFO General informationand advice SPORT Sports WEATHER Weather re...
Page 16 - For title entered CD
Built-in CD Player Basic Operations % Open the front panel Press OPEN . Disc loading slot appears. Disc loading slot h (eject) button # When loading a disc, face the label side of a disc up. # To avoid a malfunction, make sure that no metal objects come into contact with the term-inals when the fron...
Page 17 - Press LIST to switch to the track title list; Press LIST to switch to the file name list; Press MULTI-CONTROL to display the
! Audio CD that contains certain informationsuch as text and/or number is CD TEXT. ! If specific information is not recorded on adisc, title or name is not displayed. ! Depending on the version of iTunes ® used to write MP3 files onto a disc, comment informa-tion may not be correctly displayed. — iT...
Page 18 - Selecting a repeat play range; Playing tracks in random order; Scanning folders and tracks; Pausing playback
3 Turn MULTI-CONTROL to select the function.REPEAT (repeat play) — RANDOM (random play) — SCAN (scan play) — PAUSE (pause) — COMP/BMX (compression and BMX) — TITLE INPUT (disc title input) Notes ! To return to the ordinary display, press BAND/ESC . ! If you do not operate functions except for TITLE ...
Page 19 - Using compression and BMX; Using disc title functions; Entering disc titles
Using compression and BMX Using the COMP (compression) and BMXfunctions let you adjust the sound playbackquality of this unit. % Press COMP/BMX repeatedly to select the desired setting.COMP/BMX OFF — COMP 1 — COMP 2 — COMP/BMX OFF — BMX 1 — BMX 2 Note You can also perform this operation in the menut...
Page 20 - Bluetooth Audio; Entering PIN code for Blue-
Bluetooth Audio Important ! Depending on the Bluetooth audio player con-nected to this unit, the operations availablewith this unit are limited to the following twolevels: — Lower level: Only playing back songs onyour audio player is possible. — Higher level: Playing back, pausing, select-ing songs,...
Page 21 - Paired device name will be displayed.; Push and hold; Function and operation; is the same as that of the built-in CD
Connecting a paired Bluetooth audioplayer 1 Press MULTI-CONTROL to display the main menu. 2 Use MULTI-CONTROL to select CONNECTION. Turn to change the menu option. Press to se-lect. 3 Turn MULTI-CONTROL to select PAIRED DEVICE. Paired device name will be displayed. # Push MULTI-CONTROL left or right...
Page 22 - Stopping playback
! If a Bluetooth audio player is not connected tothis unit yet, AUTO CONNECT and DEVICE INFO appear in the function menu and other functions are not available. ! If a Bluetooth audio player is connected viaA2DP (Advanced Audio Distribution Profile),only AUTO CONNECT and DEVICE INFO ap- pear in the f...
Page 23 - Bluetooth Telephone; Setting up for hands-free phoning; Connecting and disconnecting; The following function can be operated.; If the phone is not connected but paired
Bluetooth Telephone Important ! Since this unit is on standby to connect withyour cellular phone via Bluetooth wirelesstechnology, using this unit without runningthe engine can result in battery drainage. ! Advanced operations that require your atten-tion such as dialing numbers on the monitor,using...
Page 24 - Introduction of connection and regis-; Transferring entries to the
! BT HANDS FREE (new phone) ! DELETE PHONE (delete phone) If the phone is connected but not paired The following functions can be operated. ! SET PHONE (phone registration) ! DISCONNECT PHONE (disconnect phone) ! DELETE PHONE (delete phone) If the phone is connected and paired The following function...
Page 25 - Using this unit to initiate a connection; Connecting a paired cellular phone
Using this unit to initiate a connection 1 Display the connection menu. Refer to Introduction of connection and regis- tration on page 23. 2 Use MULTI-CONTROL to select BT HANDS FREE. 3 Use MULTI-CONTROL to select a group. Push MULTI-CONTROL up or down to select a group. NOKIA (Nokia) — STANDARD (st...
Page 26 - Disconnecting a cellular phone; Deleting a registered phone
After connected, this unit automaticallychanges to PH. BOOK DL (phone book down- load confirmation) display. # If the connection fails, ERROR is displayed. In this case, check the cellular phone and try again. 4 Use MULTI-CONTROL to decide to download the phone book from your cellu-lar phone or not....
Page 27 - Making a phone call; Dial a number; Making a call by entering phone num-; Preset number; Using preset numbers; Voice recognition; Taking a phone call; Answering or rejecting an incoming call; Operating a call waiting
Making a phone call Dial a number The most basic way to make a call is to simplydial the number.Refer to Making a call by entering phone num- ber on page 34 for detailed instructions. Calling a number in the Phone Bookor the Call History Refer to Calling a number in the phone book on the next page a...
Page 28 - Using the call history; Using the phone number list; Using the phone book; Downloading phone books from your; Calling a number in the phone book; Using the phone number list
Using the phone number list Important Be sure to park your vehicle and apply the park-ing brake when operating the list. % Press LIST to display the list. Press LIST repeatedly to switch between the following lists: RECENT CALLS (call history) — ABC SEARCH (phone book) — DIAL PRESET (preset number l...
Page 29 - Editing phone numbers; Assign genres to phone numbers; Calling a number in the
# You can scroll literal information by pressing and holding DISP . 5 Press MULTI-CONTROL to display the phone number list of the selected entry. # You can also display the phone number list of the selected entry by pushing MULTI-CONTROL right. # You can scroll literal information by pressing and ho...
Page 30 - Clearing a phone book entry; Assigning preset numbers
Clearing a phone book entry 1 Display the phone number list of your desired phone book entry. See step 1 to 5 on Calling a number in the phone book on page 28 for how to do this. 2 Press and hold MULTI-CONTROL to dis- play the edit screen. 3 Turn MULTI-CONTROL to display CLR MEMO (clear memory scree...
Page 31 - Deleting preset numbers; Calling a number in the preset list; Assigning preset numbers by using; Assigning
# You can scroll literal information by pressing and holding DISP . # If you want to go back and select another entry, push MULTI-CONTROL left. 10 Press MULTI-CONTROL to store thephone number in the preset list. Deleting preset numbers 1 Press LIST to display DIAL PRESET (pre- set number list). Refe...
Page 32 - Entering the ID and the password
3 Turn MULTI-CONTROL to select the function.PH BOOK DOWNLOAD (phone book down- load) — PH BOOK TRANSFER (phone book transfer) — AUTO CONNECT (automatic con- nection setting) — AUTO ANSWER (automatic answer setting) — ECHO CANCEL (echo can- cel) — RING TONE (ring tone select) — NUMBER DIAL (call by e...
Page 33 - Setting the automatic connection; Setting automatic answering; Refer to; Echo canceling and noise reduction; Refer to
3 Push MULTI-CONTROL left or right to move the cursor to the previous or nextcharacter position. 4 Press MULTI-CONTROL to determine the ID and the password. 5 After entering the ID and password, use your cellular phone to continue theprocedure. Transferring entries to thephone book Phone books in yo...
Page 34 - Switching the ring tone; Clearing memory
# This function can be performed even while talking on the phone. In this case, press MULTI-CONTROL to switch to ECHO CANCEL . Switching the ring tone 1 Display the function menu. Refer to Introduction to advanced operations on page 31. 2 Use MULTI-CONTROL to select RING TONE in the function menu. 3...
Page 35 - Selecting menu language
Changing the phone bookdisplay order 1 Display the function menu. Refer to Introduction to advanced operations on page 31. 2 Use MULTI-CONTROL to select PH. B. NAME VIEW.INVERT NAME YES is displayed. 3 Press MULTI-CONTROL to change the name view order.INVERTED is displayed. Pressing MULTI-CONTROL re...
Page 36 - Using balance adjustment; Introduction of audio adjustments; Using the equalizer; Recalling equalizer curves; Audio Adjustments
Introduction of audioadjustments 1 Press MULTI-CONTROL to display the main menu. 2 Use MULTI-CONTROL to select AUDIO. Turn to change the menu option. Press to se-lect.The audio menu is displayed. 3 Turn MULTI-CONTROL to select the audio function. Turn MULTI-CONTROL to switch between the audio functi...
Page 37 - Adjusting equalizer curves; Recalling equalizer cur ves; Fine-adjusting equalizer curve; Center frequency; Adjusting loudness; Audio
VOCAL Vocal CUSTOM Custom FLAT Flat SUPER BASS Super bass ! CUSTOM is an adjusted equalizer curve that you create. If you make adjustments toan equalizer curve, the equalizer curve set-ting is memorized in CUSTOM . ! When FLAT is selected, no supplement or correction is made to the sound. This isuse...
Page 38 - Using subwoofer output; Adjusting subwoofer settings; Using the high pass filter
4 Push MULTI-CONTROL left or right to select a desired level. Each time MULTI-CONTROL is pushed left or right, level is selected in the following order: LOW (low) — MID (mid) — HIGH (high) Using subwoofer output This unit is equipped with a subwoofer outputwhich can be turned on or off.Also, phase c...
Page 39 - Boosting the bass; Adjusting source levels
Boosting the bass Bass boost function boosts the bass level ofsound. 1 Display the audio menu. Refer to Introduction of audio adjustments on page 36. 2 Use MULTI-CONTROL to select BASS BOOST. 3 Push MULTI-CONTROL up or down to select a desired level.0 to +6 is displayed as the level is increased or ...
Page 40 - Setting the clock; Adjusting initial settings; Adjusting initial settings; Initial Settings
Adjusting initial settings 1 Press SRC and hold until the unit turns off. 2 Press MULTI-CONTROL and hold until the initial setting menu appears in the dis-play. 3 Turn MULTI-CONTROL to select one of the initial settings.CLNDR (calendar) — CLOCK (clock) — OFF CLOCK (off clock) — FM STEP (FM tuning st...
Page 41 - Setting the FM tuning step; Switching the warning tone; Switching the auxiliary setting; Using the AUX source; Initial
3 Press MULTI-CONTROL to turn the off clock display on. # To turn the off clock display off, press MULTI-CONTROL again. Setting the FM tuning step Normally the FM tuning step employed byseek tuning is 50 kHz. When AF or TA is on,the tuning step automatically changes to 100kHz. It may be preferable t...
Page 42 - Switching the ever scroll; Multi language display setting; Activating the
Initially, the unit is set for rear full-range speak-er connection ( FULL ). When rear output is connected to full range speakers (when FULL is selected), you can connect other full rangespeakers ( PREOUT :REAR ) or a subwoofer ( PREOUT :SUB W ) to the RCA rear output. 1 Display the initial setting ...
Page 43 - Microphone setting; Editing device name
2 Use MULTI-CONTROL to select BT AUDIO. 3 Press MULTI-CONTROL to turn the BT AUDIO source on. # To turn the BT AUDIO source off, press MULTI-CONTROL again. Microphone setting While using hands-free phoning, you can useeither built-in microphone or optional micro-phone. 1 Display the initial setting ...
Page 45 - Selecting AUX as the source; Setting the AUX title; The title displayed for the; Other Functions; Other
Using the AUX source You can connect an auxiliary device to thisunit using a stereo mini plug cable. % Insert the stereo mini plug into the input jack on this unit. For more details, refer to the installation man-ual. Selecting AUX as the source % Press SRC to select AUX as the source. # If the auxi...
Page 46 - Troubleshooting; Error messages; Additional Information
Troubleshooting Bluetooth audio/telephone Symptom Cause Action The audio ofthe Bluetoothaudio source isnot playedback. A Bluetooth-con-nected cellularphone is cur-rently in a phonecall. The audio will beplayed back whenthe call is com-pleted. A Bluetooth-con-nected cellularphone is cur-rently in ope...
Page 47 - Dual Discs; WMA; Additional
! Do not insert anything other than a CD intothe CD loading slot. ! Do not use cracked, chipped, warped, orotherwise damaged discs as they may da-mage the player. ! Unfinalized CD-R/CD-RW disc playback isnot possible. ! Do not touch the recorded surface of thediscs. ! Store discs in their cases when...
Page 48 - Example of a hierarchy; : Compressed audio file; Bluetooth profiles
Compressed audio files onthe disc ! Depending on the version of WindowsMedia Player used to encode WMA files,album names and other text informationmay not be correctly displayed. ! There may be a slight delay when startingplayback of WMA files encoded with imagedata. ! ISO 9660 Level 1 and 2 complia...
Page 50 - Specifications
Specifications General Power source ............................. 14.4 V DC (12.0 V to 14.4 V allowable) Grounding system ................... Negative typeMax. current consumption ..................................................... 10.0 A Dimensions (W × H × D): DIN Chassis ..................... 1...
Page 51 - PIONEER CORPORATION
PIONEER CORPORATION 4-1, MEGURO 1-CHOME, MEGURO-KUTOKYO 153-8654, JAPAN PIONEER ELECTRONICS (USA) INC. P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.TEL: (800) 421-1404 PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-9120 Melsele, BelgiumTEL: (0) 3/570.05.11 PIONEER ELECTRONICS ASIACENTRE ...
