Page 2 - safe place for future reference.; Contents
Black plate (2,1) Thank you for buying this Pioneer product. Please read through these instructions so you will know how to operate your modelproperly. After you have finished reading the instructions, keep this document in a safe place for future reference. Precaution Information to User 3 – The Sa...
Page 3 - Information to User; English; Precaution
Black plate (3,1) Information to User Contains FCC ID : RKXFC6000TSContains IC ID : 5119A-FC6000TS ! This device complies with Part 15 of FCCRules and Industry Canada licence-exemptRSS standard(s). Operation is subject tothe following two conditions: (1) this devicemay not cause interference, and (2...
Page 4 - ESTABLISH A SAFE LEVEL:
Black plate (4,1) CAUTION This product is a Class 1 laser product classi-fied under the Safety of laser products, IEC60825-1:2007, and contains a class 1M lasermodule. To ensure continued safety, do not re-move any covers or attempt to gain access tothe inside of the product. Refer all servicing toq...
Page 5 - Introduction
Black plate (5,1) License, Warranty Disclaimer& Limitation of Liability PIONEER AVIC-8200NEX, AVIC-7200NEX, AVIC-6200NEX, AVIC-5200NEX - for U.S.A. THIS IS A LEGAL AGREEMENT BETWEENYOU, AS THE END USER, AND PIONEERELECTRONICS (USA) INC. ( “ PIONEER ” ). PLEASE READ THE TERMS AND CONDI-TIONS OF T...
Page 10 - END USER LICENSE AGREEMENT
Black plate (10,1) END USER LICENSE AGREEMENT END USER TERMS The content provided by HERE (“Data”) is licensed, not sold. By opening this package, or installing, copying, or otherwise using the Data, you agree to be bound by the terms of this agreement. The Data is provided for your personal, intern...
Page 16 - Terms used in this manual; Rear display
Black plate (16,1) About the data for the mapdatabase ! Modifications related to roads, streets/high-ways, terrain, construction and other thingsbefore/during the development period maynot be reflected in this database. Inevitably,those modifications after that period arenot reflected in this databa...
Page 17 - Important safety information
Black plate (17,1) WARNING Do not ingest the battery, Chemical Burn Hazard(The remote control supplied with) This productcontains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause se-vere internal burns in just 2 hours and can leadto death.Keep new and used batte...
Page 20 - Parking brake interlock; To ensure safe driving; To avoid battery exhaustion; Additional safety information
Black plate (20,1) Parking brake interlock Certain functions (such as viewing of videoimage and certain touch panel key operations)offered by this product could be dangerous(possibly resulting in serious injury or death)and/or unlawful if used while driving. To pre-vent such functions from being use...
Page 21 - Rear view camera; Handling the SD card slot; Handling the USB connector
Black plate (21,1) Rear view camera With an optional rear view camera, you areable to use this product as an aid to keep aneye on trailers, or backing into a tight parkingspot. WARNING ! SCREEN IMAGE MAY APPEAR REVERSED. ! USE INPUT ONLY FOR REVERSE OR MIRRORIMAGE REAR VIEW CAMERA. OTHER USEMAY RESU...
Page 22 - Failure to operate; About this product; Notes before using the system
Black plate (22,1) Important (Serial Number:) The serial number of this device is located on thebottom of this product. For your own security andconvenience, be sure to record this number onthe enclosed warranty card. Failure to operate After-sales service for Pioneer products Please contact the dea...
Page 25 - IMPORTANT; In order to perform this update, the following items are needed:
System Firmware Update 1.04 Instructions for Pioneer In-dash Multimedia Navigation and Receivers (AVIC-8200NEX, AVIC-7200NEX, AVIC-6200NEX, AVIC-5200NEX and AVH-4200NEX) This firmware update (version 1.04 for AVIC and version 1.04 for AVH) applies only to the following models of Pioneer products sol...
Page 26 - The only USB port that supports the firmware update is; USB port 1; Displaying the firmware version; Press the HOME button to display the Top menu screen.
CAUTION • The only USB port that supports the firmware update is USB port 1 . • DO NOT turn your unit off or disconnect the USB storage device while the firmware is beingupdated. • You can only update the firmware when the vehicle is stopped and the parking brake isengaged. Displaying the firmware v...
Page 27 - Verify that the firmware on your unit is not already 1.04.; Checking the Bluetooth software version
5. Touch [Firmware Information]. 6. After the “Firmware Information” screen appears, check the firmware version number. 7. Verify that the firmware on your unit is not already 1.04. Checking the Bluetooth software version Procedure: 1. Press the HOME button to display the Top menu screen. 2. Touch t...
Page 28 - Downloading the firmware update files from Pioneer's website; Download the firmware update files
4. The version of this product’s Bluetooth device appears.Verify that the version of Bluetooth device is not already 03.41.13 . Downloading the firmware update files from Pioneer's website Once upgraded to this version, it is not possible to downgrade to a lower version. 1. Download the firmware upd...
Page 29 - Part 1: Updating the firmware on your Unit; update file and copy it onto the storage device.; The “System” screen appears.
Part 1: Updating the firmware on your Unit Procedure: 1. Connect a blank (formatted) USB storage device to your computer, and then locate the correct update file and copy it onto the storage device. 2. Insert the USB storage device to the USB port 1 of the receiver. 3. Set the audio source to “OFF” ...
Page 32 - Confirm that the firmware has been updated
Confirm that the firmware has been updated Perform the same procedure for “Displaying the firmware version” to confirm that the firmware has been updated. Procedure: 1. Press the HOME button to display the Top menu screen. 2. Touch the following keys in the following order. The “System” screen appea...
Page 33 - Use the same update file that you used for Part 1.
5. Touch [Firmware Information]. 6. After the “Firmware Information” screen appears, verify that the firmware version is 1.04. Part 2: Updating Bluetooth software Procedure: Use the same update file that you used for Part 1. 1. Press the HOME button to display the Top menu screen. 2. Touch the follo...
Page 34 - The data transfer screen is displayed.; Confirm that the Bluetooth software has been updated
4. Touch [Start] The data transfer screen is displayed. □ Follow the on-screen instructions to finish updating the Bluetooth software. Confirm that the Bluetooth software has been updated Perform the same procedure for “Checking the Bluetooth software version” to confirm that the Bluetooth software ...