Pioneer AVIC6200NEX - Installation Manual
Pioneer AVIC6200NEX – Installation Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – CAUTION; The only USB port that supports the firmware update is; USB port 1; Displaying the firmware version; The “System” screen appears
- Page 3 – Verify that the firmware on your unit is not already 1.05.; Checking the Bluetooth software version; Press the HOME button to display the Top menu screen.
- Page 4 – Downloading the firmware update files from Pioneer's website; IMPORTANT; than one of the above models.
- Page 5 – The “System” screen appears.
- Page 8 – Confirm that the firmware has been updated
- Page 9 – Use the same update file that you used for Part 1.
- Page 10 – The data transfer screen is displayed.; Confirm that the Bluetooth software has been updated; Copyright 2017 Pioneer Corporation
System Firmware Update 1.05 Instructions for Pioneer In-dash Multimedia
DVD Receivers
(AVH-4200NEX)
This firmware update (version
1.05
for AVIC and version
1.05
for AVH) applies only to the following
models of Pioneer products sold in the United States and Canada.
AVH-4200NEX
IMPORTANT
Please download and print these Firmware Update instructions before downloading and installing the
firmware update. It is important that you complete all steps correctly and in the order described below.
Please note that this update has two parts. You will download one file, but two installation
sequences will be performed.
•
If you install this Firmware, all navigation function settings and save data will be formatted to
default settings. Once the update has finished, you will need to reconfigure the settings.
•
Any content purchased and added through Naviextras will also need to be re-installed. Note
that no charges will be incurred to download previously purchased content.
If you have any questions, please contact Pioneer Customer Service toll free at 1-800-421-1404,
Monday through Friday, 7:30 AM - 11:30 AM and 12:30 PM - 4:00 PM (Pacific Time), excluding
holidays, or by email through parts.pioneerelectronics.com/contact.
In order to perform this update, the following items are needed:
• Pioneer in-dash Navigation or DVD system: AVIC-8200NEX, AVIC-7200NEX, AVIC-
6200NEX, AVIC-5200NEX or AVH-4200NEX.
• Blank USB storage device (no files), 2 GB or larger in capacity, formatted to FAT32.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Pioneer AVIC6200NEX
Summary
CAUTION • The only USB port that supports the firmware update is USB port 1 . • DO NOT turn your unit off or disconnect the USB storage device while the firmware is being updated. • You can only update the firmware when the vehicle is stopped and the parking brake is engaged. Displaying the firmware...
5. Touch [Firmware Information]. 6. After the “Firmware Information” screen appears, check the firmware version number. 7. Verify that the firmware on your unit is not already 1.05. Checking the Bluetooth software version Procedure: 1. Press the HOME button to display the Top menu screen. 2. Touch t...
4. The version of this product’s Bluetooth device appears. Verify that the version of Bluetooth device is not already 03.41.13 . Downloading the firmware update files from Pioneer's website Once upgraded to this version, it is not possible to downgrade to a lower version. 1. Download the firmware up...
