Pioneer 4MT610 - User Manual
Pioneer 4MT610 – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Thank you for purchasing this Pioneer quality product.; Tools Required; Adjustable; Prior to Installation; Observe all local plumbing and building codes before you begin
- Page 3 – Valve Installation; Series
- Page 5 – Remove the test plug. Turn on the both valves make sure there is ap
- Page 7 – Trim Installation; surface if necessarry.
- Page 8 – Engineering Excellence; E ng ine e r ing E xc e l l e nc e
Installation Guide
Two Handle Roman Tub Set:
4AM610* • 4BR710* • 4CL610*
•
4MT610* • 4BR720
•
4MT620* • 4BR730*
•
4BR600* • 4BR800*
•
4BR610* • 4BR810*
•
4BR620 • 4BR820
•
4BR630* • 4BR830*
•
4BR700*
•
This product meets the following standards:
ASME A112.18.1
•
ANSI A117.1
•
CUPC/ IAPMO LISTED/ *ADA COMPLIANT
•
REV-10 31, 12
Engineering Excellence
Pioneer Industries, Inc. © 2012
Engineering Excellence
E ng ine e r ing E xc e l l e nc e
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 REV-10 31, 12 Thank you for purchasing this Pioneer quality product. Tools Required Adjustable Wrench Teflon Tape Rags 3/32” Allen Wrench Prior to Installation Observe all local plumbing and building codes before you begin • installation.Carefully shut off both hot and cold water supplies. • Plug ...
3 REV-10 31, 12 Valve Installation Thread the locknut (C) and rubber washer (B) from bottom of the spout 1. shank (A).Slide the spout shank (A) from the spout mounting hole. Slide the rubber 2. washer (B) from underneath of the shank. Thread the locknut (C) from underneath of the shank. Adjust the s...
5 REV-10 31, 12 Valve Installation 7. Carefully install the hose (I) to the valve outlets. The other end connect it to ‘T‘ connector (E). 8. Do not overtighten the hose with adjustable wrench as it may damage the valve assembly. 9. Ensure that hot and cold side stems are turning in correct direction...
