Pioneer 4MT610 - Manuals

2 REV-10 31, 12 Thank you for purchasing this Pioneer quality product. Tools Required Adjustable Wrench Teflon Tape Rags 3/32” Allen Wrench Prior to Installation Observe all local plumbing and building codes before you begin • installation.Carefully shut off both hot and cold water supplies. • Plug ...

3 REV-10 31, 12 Valve Installation Thread the locknut (C) and rubber washer (B) from bottom of the spout 1. shank (A).Slide the spout shank (A) from the spout mounting hole. Slide the rubber 2. washer (B) from underneath of the shank. Thread the locknut (C) from underneath of the shank. Adjust the s...

5 REV-10 31, 12 Valve Installation 7. Carefully install the hose (I) to the valve outlets. The other end connect it to ‘T‘ connector (E). 8. Do not overtighten the hose with adjustable wrench as it may damage the valve assembly. 9. Ensure that hot and cold side stems are turning in correct direction...