Pioneer 4MT200T - Installation Manual
Pioneer 4MT200T – Installation Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Thank you for purchasing this Pioneer quality product.; Tools Required; Strap Wrench; Prior to Installation; Observe all local plumbing and building codes before you begin; Caution
- Page 3 – CXC Installation
- Page 4 – Remove the temporary nipple.; Note:- The 1/2” threaded pipe nipple must be kept with a length of; Apply teflon tape at the threaded connection. Screw diverter tub
- Page 6 – Trim Installation; Turn off the main water supply
- Page 8 – placed behind the face plate (N) to form water tight seal. Slide the es
- Page 10 – Engineering Excellence; E ng ine e r ing E xc e l l e nc e
Installation Guide
Single Handle Tub And Shower Trim Set:
4MT100T
•
4MT110T
•
4MT120T
•
4MT130T
•
4MT200T
•
4MT300T
•
4MT320T
•
4MT330T
•
4MT400T
•
This product meets the following standards:
ASME A112.18.1
•
ADA COMPLIANT
•
REV-12 2, 13
Engineering Excellence
Pioneer Industries, Inc. © 2012
Engineering Excellence
E ng ine e r ing E xc e l l e nc e
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Pioneer 4MT200T
Summary
2 REV-12 2, 13 Thank you for purchasing this Pioneer quality product. Tools Required Strap Wrench Teflon Tape Thermometer Allen Wrench Plumbers Putty Prior to Installation Observe all local plumbing and building codes before you begin • installation. The finished wall and tub/shower valve (4020B or ...
3 REV-12 2, 13 Trim Installation (For 4MT100T, 4MT200T) Remove the temporary nipple. • IPS Installation:- • The 1/2” threaded pipe nipple must be kept with a length of 1-3/8” from • finished wall. For tub spout(A) with tub spout escutcheon(B) slide the spout • escutcheon(B) along the threaded pipe n...
4 REV-12 2, 13 Trim Installation(For 4MT110T, 4MT120T) Remove the temporary nipple. • IPS Installation:- • Note:- The 1/2” threaded pipe nipple must be kept with a length of • 7/16” from finished wall. Apply teflon tape at the threaded connection. Screw diverter tub • spout(C) onto the pipe nipple a...
