Philips TAB6405/10 - User Manual

4 Caution FCC and IC statement for Users (USA and Canada only) FCC INFORMATION Warning: ͻ This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. ͻ Changes or modifications to this unit not expressly approved by the party responsible for compl...

E ngl ish 5 What’s in the Box Check and identify the items in the package: ijŦ Soundbar x 1 ijŦ Wireless Subwoofer x 1 ijŦ Remote Control x 1 ijŦ Power Cord (for Subwoofer) * x 2 ijŦ DC Adapter (for Soundbar) * x 2 ijŦ IR pass-through Cable x 1 ijŦ IR Bracket x 1 ijŦ Wall Mount kit x 1 (Wall Brackets x2, Sc...

6 2 Your Soundbar Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your Soundbar at www.philips.com/support. Main unit This section includes an overview of the main unit. Remote Control Sensor Soundbar’s LED indicator Switch th...

E ngl ish 7 Wireless subwoofer This section includes an overview of the Wireless subwoofer. AC ~ Socket Connect to the power supply. Pair button Press and hold to enter the pairing mode for the subwoofer. Subwoofer indicator Determine the status based on the wireless subwoofer indicator. LED State S...

8 Prepare the Remote Control ͻ The provided Remote Control allows the unit to be operated from a distance. ͻ Even if the Remote Control is operated within the effective range 19.7 feet (6m), remote control operation may be impossible if there are any obstacles between the unit and the remote control...

E ngl ish 9 Note ͻ Your TV must support the HDMI-CEC and ARC function. HDMI-CEC and ARC must be set to On. ͻ The setting method of HDMI-CEC and ARC may differ depending on the TV. For details about ARC function, please refer to your TV owner’s manual. ͻ Only HDMI 1.4 compatible cables can support th...

10 AUX R L AUDIO OUT ͻ Use a RCA to 3.5mm audio cable to connect the TV’s audio output sockets to the AUX socket on the unit. Connect the IR pass-through cable If the Soundbar blocks the IR receiver of the TV when placing directly in front of it, you can connect the Soundbar and TV with the supplied...

E ngl ish 11 Pair up with the subwoofer Automatic Pairing Plug the Soundbar and the subwoofer into the mains sockets and then press on the unit or remote control to switch the unit to ON mode. The subwoofer and Soundbar will automatically pair. Determine the status based on the wireless subwoofer in...

12 4 Use your Soundbar This section helps you use the Soundbar to play audio from connected devices. Before you start ͻ Make the necessary connections described in the user manual. ͻ Switch the Soundbar to the correct source for other devices. Turn ON and OFF ͻ When you first connect the unit to the...

E ngl ish 13 Adjust the Volume When adjusting the volume of the soundbar and subwoofer, the status indicator will increase / decrease the amount of light. According to the corresponding light display / blinking (Fig), determine the current volume level of the soundbar and subwoofer. Adjust the Sound...

14 Note ͻ The music streaming may be interrupted by obstacles between the device and Soundbar, such as wall, metallic casing that covers the device, or other devices nearby that operate in the same frequency. ͻ If you want to connect your Soundbar with another Bluetooth device, press and hold BT/Pai...

E ngl ish 15 5 Wall mount Note ͻ Improper wall mounting may result in accident, injury or damage. If you have any query, contact Consumer Care in your country. ͻ Before wall mounting, make sure the wall can support the weight of your Soundbar. ͻ Before wall mount, you need not remove the rubber feet...

E ngl ish 17 7 Troubleshooting Warning ͻ Risk of electric shock. Never remove the casing of the product. To keep the warranty valid, never try to repair the product yourself. If you have problems using this product, check the following points before you request service. If you still have a problem, ...