Page 2 - Contents
EN 2 1 Important 3 Safety 3 Care 4 Legal 5 Sustainability 7 Help and support 8 2 Use your TV 9 TV controls 9 Watch TV 10 View programme guide 14 Play multimedia files 14 3 Use more of your TV 16 Professional mode 16 Play games 20 View Text 21 Set locks and timers 22 4 Change your TV settings 24 Pict...
Page 3 - Important; Safety; Precautions
EN 3 En gl is h 1 Important Safety Precautions Read and understand all instructions before you use your TV. If damage is caused by failure to follow the instructions, the warranty does not apply. Risk of electric shock or fire! Never expose the TV to rain or water. Never place liquid containers, s...
Page 4 - Care; Screen; Placement tips
EN 4 Educate children about the dangers of climbing on furniture to reach the TV. Risk of swallowing batteries! The product/remote control may contain a coin-type battery, which can be swallowed. Keep the battery out of reach of children at all times! Risk of overheating! Never install the TV ...
Page 5 - Lock the TV; Legal; Notice
EN 5 En gl is h Lock the TV Your TV is equipped with a Kensington security slot at the base of the TV. To secure the TV, purchase a Kensington anti-theft lock (sold separately). Legal Notice 2013 © TP Vision Netherlands B.V. All rights reserved. Specifications are subject to change without notice. T...
Page 7 - Sustainability; Energy efficiency
EN 7 En gl is h PlayReady Final Products Content owners use Microsoft PlayReady ™ content access technology to protect their intellectual property, including copyrighted content. This device uses PlayReady technology to access PlayReady protected content and/or WMDRM-protected content. If the device...
Page 8 - Energy label; Help and support; Visit the Philips website; Use the Philips connectivity guide
EN 8 Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed of with normal household waste. Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environ...
Page 9 - Use your TV; TV controls; Rear controls; Remote control
EN 9 En gl is h 2 Use your TV TV controls Rear controls 1. (Standby): Switch the TV on or off. 2. CH +/-: Switch to the next or previous channel. 3. (SOURCE): Watch a connected device. 4. +/- (Volume): Increase or decrease volume. Sensors and indicators 1. Remote control sensor Point the remote cont...
Page 10 - Watch TV; Switch TV on or off
EN 10 13. LIST: Access the TV channel list. 14. ADJUST: Adjust TV settings. 15. INFO : Display information about current activity. 16. OPTIONS: Access currently available options, picture and sound menus. 17. ( Back ) : Return to the previous menu page or exit from a TV function. 18. CH - / CH +: Ch...
Page 11 - Adjust TV volume
EN 11 En gl is h Switch the TV on Connect the TV to the mains outlet and switch on the main power. If the TV is not switched on, the standby LED remains off. Press on the TV. If the standby LED is lit, press on the remote control. Note: There is a short delay before the TV responds. Tip: If yo...
Page 13 - Watch connected devices
EN 13 En gl is h 1. While you watch TV, press LIST . The channel list is displayed. 2. Select the channel to lock, then press OPTIONS . 3. Select [Lock channel] , then press OK . 4. If prompted, enter the PIN code. The channel is marked with a lock icon in the channel list. Tip: To watch a locked ch...
Page 14 - View programme guide; Play multimedia files; What you can do
EN 14 [Wide screen] : Shows widescreen format content unstretched. Not recommended for HD or PC. [Unscaled] : Provide maximum detail for PC. Only available when PC mode is selected in the Picture menu. [4:3] : Display the classic 4:3 format. View programme guide What you can do You can view ch...
Page 15 - Play options
EN 15 En gl is h Play options Watch video 1. Select in the top bar. 2. Select a video, then press OK . 3. Optional: To play all the videos in a folder, select a video, then select [Play all] . To skip to the next or previous video, press CH+ or CH - . To pause the video, press OK . Press OK agai...
Page 16 - Professional mode
EN 16 3 Use more of your TV Professional mode What you can do With professional mode, you can configure this TV for commercial use. This includes features such as: Blocking guests from modifying the TV channels or settings Programming the TV to switch on to a specific channel and volume Limiti...
Page 17 - Change professional mode settings
EN 17 En gl is h To view the hotel information screen by pressing INFO , in the professional setup menu, select [Hotel information] > [Info key enable] > [On] . Change professional mode settings Professional mode settings Use professional-mode settings to speed up installation of your TV for c...
Page 18 - Control user access
EN 18 switched on, the TV automatically switches to standby. - [Last status] : If the mains power is switched on, the TV automatically switches to the last status (i.e. on or to standby). [Smart power] : Enable or disable energy saving mode. Load clock In Professional mode, you can set the local t...
Page 19 - Change speaker settings
EN 19 En gl is h [RC lock] : Select [On] to disable all buttons on the remote control. Note that you can still enter the professional setup menu by pressing 3, 1, 9, 7, 5, 3, . [OSD display] : Select [On] to enable on-screen information. [High security] : Select [On] to restrict access to the ...
Page 20 - Change guest menu settings; Play games
EN 20 Tip: To enable ThemeTV at TV start-up, select [ThemeTV] > [Startup] . Set up ThemeTV 1. In the Professional setup menu, select [ThemeTV Configuration] . 2. Select a channel group to edit. 3. Select [ThemeTV Channel setup] . 4. Select the channels to add to your channel group. Change guest m...
Page 21 - What you need; View Text; Select a page
EN 21 En gl is h What you need Connect your game console to this TV. See Connect your TV > Connect devices > Game console (Page 36). If the TV automatically adds the game console to the Source menu, it also applies the game sound preset when you start playing games (for certain models). Star...
Page 22 - Set locks and timers; Clock
EN 22 Text language For digital TV channels where the broadcasters provide different text languages, you can select your preferred primary and secondary languages. 1. Press . 2. Select [Setup] > [Channel settings] . 3. Select [Languages] > [Primary Text] or [Secondary Text] . 4. Select a langu...
Page 23 - Sleep timer
EN 23 En gl is h 1. In the [Clock] menu, select [Date] or [Time] , then press OK . 2. Set the time or date with the Navigation buttons . 3. Select [Done] , then press OK . Sleep timer You can switch the TV to standby after a specified time. During the countdown to the specified time, you can switch ...
Page 24 - Picture and sound; Settings assistant; More picture settings
EN 24 4 Change your TV settings Picture and sound Settings assistant You can select picture and sound settings with the help of the settings assistant, which demonstrates the effect of your chosen setting immediately. 1. While you watch TV, press . 2. Select [Setup] > [Quick picture and sound set...
Page 25 - More sound settings
EN 25 En gl is h More sound settings You can change the settings in the Sound menu. 1. Press . 2. Select [Setup] > [TV settings] > [Sound] , then press OK . 3. Select a setting to change, then press OK . [Sound style] : Access predefined sound settings. [Restore style] : Restore the last s...
Page 26 - Channels; Automatic installation
EN 26 Channels Automatic installation When the TV was switched on for the first time, a full installation of channels was performed. To change your language, country and reinstall all available TV channels, you can run this full installation again. Start installation Note: If you are prompted to ent...
Page 27 - Update channel list
EN 27 En gl is h 5. When you have selected the correct channel frequency, select [Done] , then press OK . 6. Select an option, then press OK . [Store current channel] : Store the channel under the current channel number. [Store as new channel] : Store the channel under a new channel number. Upda...
Page 28 - Language settings; Menu language
EN 28 3. Skip the search for channels. 4. Connect the USB storage device. 5. Press . 6. Select [Setup] > [Channel settings] . 7. Select [Channel installation] > [Copy channel list] > [Copy to TV] , then press OK . The channel list is copied to the TV storage device. 8. Disconnect the USB st...
Page 29 - Universal access settings; Switch on
EN 29 En gl is h 1. While you watch TV, press . 2. Select [Setup] > [Channel settings] > [Languages] . 3. Select [Primary subtitle language] or [Secondary subtitle language] and select from the available languages. 4. Press OK to confirm. Universal access settings Switch on Some digital TV bro...
Page 30 - Other settings; TV demo; Reset all
EN 30 Type of speech 1. Press . 2. Select [Setup] > [Channel settings] . 3. Select [Languages] > [Visually impaired] or [Speech] . 4. Select a setting, then press OK . [Descriptive] : Hear descriptive speech in the visually impaired audio. [Subtitles] : Hear subtitles in the visually impai...
Page 31 - Connect your; About cables; Cable quality; HDMI
EN 31 En gl is h 5 Connect your TV About cables Cable quality Before you connect devices to the TV, check the available connectors on the device. Connect the device to the TV with the highest quality connection available. Good quality connectors transfer picture and sound better. The connections sho...
Page 32 - Connect antenna; Connect devices; Blu-ray or DVD disc player
EN 32 VGA* You can connect VGA to display PC content on the TV. VGA only transmits video. * Available on 22, 24, and 26-inch models only. Connect antenna Connect the antenna to the TV. Connect devices Blu-ray or DVD disc player Connect the disc player to the TV with an HDMI cable.
Page 33 - TV receiver
EN 33 En gl is h Connect the disc player to the TV with a component video cable (Y Pb Pr) and an audio L/R cable. TV receiver Connect the digital TV receiver with an antenna cable to the TV. Connect the satellite or digital TV receiver to the TV with an HDMI cable.
Page 34 - Video recorder
EN 34 Connect the digital TV receiver to the TV with a component video cable (Y Pb Pr) and an audio L/R cable. Connect the digital TV receiver to the TV with a SCART cable. Video recorder Connect the recorder to the TV with an antenna cable.
Page 36 - Game console; Home theatre
EN 36 Game console Connect the game console to the TV with an HDMI cable. Connect the game console to the TV with a component video cable (Y Pb Pr) and an audio L/R cable. Home theatre Connect an HDMI-ARC compliant home theatre to the TV with an HDMI cable.
Page 38 - Digital camera; Digital camcorder
EN 38 Digital camera Connect the digital camera to the TV with a USB cable. Digital camcorder Connect the digital camcorder to the TV with an HDMI cable. Connect the digital camcorder to the TV with a component video cable (Y Pb Pr) and an audio L/R cable.
Page 39 - Connect more devices; USB storage device
EN 39 En gl is h En gl is h Connect more devices USB storage device Connect the USB hard drive to the TV with a USB cable. Connect the USB flash drive with a USB cable to the TV. Computer Connect the computer to the TV with an HDMI cable.
Page 40 - Select a device; Update the source list
EN 40 Connect the computer to the TV with a DVI-HDMI cable. Connect the computer to the TV with a VGA cable*. * Available on 22, 24, and 26-inch models only. Watch connected devices Select a device Before you can watch a device, connect the device to the TV. See Connect your TV > Connect devices ...
Page 41 - Set up EasyLink devices
EN 41 En gl is h Rename a device You can rename a device after it is connected to the TV. 1. Press SOURCE . 2. Select the connector, then press [Rename] . 3. Use the on-screen keypad to enter a new name. 4. When complete, select [Done] , then press OK . Reset device settings You can reset the type a...
Page 42 - Select speaker output
EN 42 1. Press . 2. Select [Setup] > [TV settings] > [General settings] > [EasyLink] > [EasyLink remote control] . 3. Select [On] or [Off] , then press OK . Tips: To switch back to TV control, press , then select [Watch TV] . To control another device, press , then select the device ...
Page 43 - Retain picture quality
EN 43 En gl is h Retain picture quality If your TV picture quality is affected by the picture-processing features of other devices, you can switch on Pixel Plus Link. Switch on Pixel Plus Link 1. Press . 2. Select [Setup] > [TV settings] > [General settings] > [EasyLink] . 3. Select [Pixel ...
Page 44 - Troubleshooting; General issues
EN 44 6 Troubleshooting General issues The TV does not switch on: Disconnect the power cable from the power outlet. Wait for one minute then reconnect it. Make sure that the power cable is securely connected. When you are turning the TV on, off or to standby, you hear a creaking sound from the T...
Page 45 - Picture issues
EN 45 En gl is h Previously installed channels do not appear in the channel list: Make sure that the correct channel list is selected. You want to rearrange or reorder the channel list: After channels have been installed, they appear in the channel list. For information about managing channel lists,...
Page 46 - Connection issues; Contact Philips
EN 46 HDMI-CEC enabled or EasyLink compliant home theatre device. Sound should be heard from the home theatre speakers. Some devices may require you to manually enable HDMI audio output. If HDMI audio is already enabled, but you still do not hear audio, try changing the digital audio format of the...
Page 47 - Specifications; Power and reception; Display and sound; Display resolutions
EN 47 En gl is h 7 Specifications Power and reception Product specifications are subject to change without notice. Power Mains power: AC 220-240 V (50-60 Hz) Standby power consumption: < 0.3 W Ambient temperature: 5 to 40 degree Celsius For power consumption, see the product specification...
Page 48 - Multimedia
EN 48 Computer formats - VGA (Resolution - refresh rate) 640 x 480 - 60 Hz 800 x 600 - 60 Hz 1024 x 768 - 60 Hz 1280 x 1024 - 60 Hz 1360 x 768 - 60 Hz 1600 x 1200 - 60 Hz 1920 x 1080 - 60 Hz Video formats (Resolution - refresh rate) 480i - 60 Hz 480p - 60 Hz 576i - 50 Hz 576p - 50 Hz 720p - 50Hz, 60...
Page 52 - Connectivity
EN 52 Supported subtitle formats Character encoding Windows-1250 (CP-1250): Central Europe and Eastern Europe Latin (Czech, Hungarian, Polish, Slovak, Slovenian, Croatian, Romanian, Serbian) Windows-1251 (CP-1251): Cyrillic Windows-1252 (CP-1252): Western Europe Latin Windows-1253 (CP-1253):...
Page 53 - Supported TV mounts; Help version
EN 53 En gl is h Side CI: Common Interface HDMI USB Headphones: stereo 3.5mm mini-jack Supported TV mounts You can mount your TV on the wall with a compatible TV mount (sold separately). Select the type of TV mount for your TV screen size: 56 cm / 22 inches: 75mm x 75mm, M4 61 cm / 24 inches...
Page 54 - Index
EN 54 8 Index A amplifier, select output - 42 analogue channels, fine-tune - 26 analogue channels, install - 26 analogue channels, subtitles - 28 audio language - 28 auto subtitle shift - 43 Auto switch off, devices - 41 C cables - 31 CAM - 43 CAM, enable - 43 CAM, insert - 43 channel list - 12 chan...
