Page 2 - I N S T A L L A T I O N / O P E R A T I O N
® I N S T A L L A T I O N / O P E R A T I O N System 9780 C1566M-C (10/05)
Page 3 - Contents
2 C1566M-C (10/05) Contents Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 List of Illustrations . . . . . . . . . . . ....
Page 5 - List of Illustrations
4 C1566M-C (10/05) List of Illustrations 1 CM9780-MXB Mounting Baffle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 Mounting the CM9780-MXB on Top of the Mounting Baffle . . ....
Page 6 - List of Tables
C1566M-C (10/05) 5 List of Tables A LEDs Illuminated During a Basic Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 B Data Connections—Single Node Systems Without a Hot Switch . . . . ....
Page 7 - Description; MODELS; Controller and CPU Components; Matrix Bay
6 C1566M-C (10/05) Description The System 9780 is a full-featured video matrix switching control system that allows you to view and control up to 4,096 cameras and 512 monitors on a single node. Video patch panels (CM9700-VPP) allow you to connect up to 512 cameras on each CM9780-MXB bay compared to...
Page 9 - Installation; UNPACKING
8 C1566M-C (10/05) Installation UNPACKING 1. Unpack and inspect all equipment, and verify delivery according to the packing slip. Before shipping, Pelco connects, tests, and programs each system according to the individual sales order. Contact Pelco immediately if there is any discrepancy in the equ...
Page 10 - MOUNTING
C1566M-C (10/05) 9 MOUNTING Install the System 9780 in EIA-standard, 19-inch (48.26 cm) racks. CM9780-MXB 1. Install the CM9780-MXB mounting baffle first (refer to Figure 1). The mounting baffle uses 1 rack unit (RU), and it has front and rear mounting ears, which are attached to the front and rear ...
Page 14 - VIDEO INPUT/OUTPUT CONNECTIONS; Installation Tips; Opening the CM9780-MXB Front Cover
C1566M-C (10/05) 13 VIDEO INPUT/OUTPUT CONNECTIONS The following steps provide an overview of how to connect video input and output sources. More complete procedures are provided in the subsequent sections. 1. Install the CM9780-VCC and CM9780-VMC cards in the matrix bay. Refer to the Installing Vid...
Page 15 - How to Turn On the Pelco V-Sync Signal; Insert or Replace a Video Card
14 C1566M-C (10/05) INSTALLING VIDEO INPUT CARDS (CM9780-VCC) Video input cards are inserted into every slot, starting with slot 1 (refer to Figure 6). To add a video card, slide the card into the first slot. Continue as necessary, using every slot, up to a maximum capacity of sixteen video input ca...
Page 17 - PERFORMING A BASIC LED CHECK; Front Panel Label
16 C1566M-C (10/05) PERFORMING A BASIC LED CHECK You should perform a basic LED check before you connect any video input or output to the matrix bay. The LED check allows you to make sure that the system is operating properly. 1. Turn on the power switch on the rear of the matrix bay. The front cove...
Page 18 - INSTALLING REAR PANEL CARDS
C1566M-C (10/05) 17 INSTALLING REAR PANEL CARDS The following rear panel cards can be used with the CM9780-MXB matrix bay: • CM9780-DFC—This card is used to connect video ribbon cables from the CM9700-VPP video patch panels (this card can also be used for sideframing, downframing, and looping video;...
Page 21 - LOOPING VIDEO
20 C1566M-C (10/05) LOOPING VIDEO Use the CM9700-VPP panels to loop video from the CM9780-MXB out to another device (such as a DVR, VCR, or switcher), as shown in Figure 11. When looping video, set the termination jumpers on the CM9780-DFC cards to the unterminated position. Terminate the video sign...
Page 22 - VIDEO INPUT/OUTPUT CAPACITY; Single Bay
C1566M-C (10/05) 21 VIDEO INPUT/OUTPUT CAPACITY Single Bay A single CM9780-MXB can support up to 512 camera inputs (in increments of 32) and 32 monitor outputs (in increments of 16). Refer to Figure 12. Figure 12. Sample CM9780 System with 512 Cameras and 32 Monitors PRINTER COM 1 COM 2 CM9700-CC1 C...
Page 23 - Multiple Bays, Single Node; NOTE
22 C1566M-C (10/05) Multiple Bays, Single Node In a single-node system with one CM9700-CC1 (not networked), you can connect multiple CM9780-MXBs using “sideframing” and “downframing” for a maximum capacity of 4,096 camera inputs and 256 monitor outputs. • Sideframing—To expand the matrix video input...
Page 27 - Networked System
26 C1566M-C (10/05) Networked System A networked system with multiple nodes uses an NIU (network interface unit) to combine up to 24 CM9700-CC1 systems into a network—each CC1 system is called a “node.” Multiple CM9780-MXB units can be connected to each CC1 through sideframing and downframing. An NI...
Page 28 - INSTALL A BACKUP POWER SUPPLY; REMOVE A BACKUP POWER SUPPLY
C1566M-C (10/05) 27 THE POWER SUPPLY MODULE (CM9700-MPS) You can add a backup power supply module (CM9700-MPS) to a System 9780 matrix bay to provide redundancy to the bay’s power supply. INSTALL A BACKUP POWER SUPPLY 1. Open the matrix bay front cover. 2. Remove the blank-off plate from the empty p...
Page 29 - HOW TO REPLACE THE FUSE IN A POWER SUPPLY MODULE
28 C1566M-C (10/05) HOW TO REPLACE THE FUSE IN A POWER SUPPLY MODULE The matrix bay is shipped from the factory configured for the correct input power. The power input panel, on the rear panel of the matrix bay, provides two separate power input receptacles, one for each power supply. Each power inp...
Page 30 - HOW TO TURN OFF THE AUDIBLE POWER SUPPLY ALARM
C1566M-C (10/05) 29 HOW TO TURN OFF THE AUDIBLE POWER SUPPLY ALARM The power supply module contains an audible alarm, which operates in conjunction with the fault LEDs located on the power supply front panel. To turn off this alarm, complete the following steps: 1. Turn off the matrix bay power. 2. ...
Page 31 - SYSTEM DEVICE CONNECTIONS
30 C1566M-C (10/05) SYSTEM DEVICE CONNECTIONS 1. Turn off the power to all system devices and disconnect all power line cords while connecting system devices. 2. Complete the following steps to connect one or more CM9760-KBD system keyboards. a. Connect the keyboard to the CM9505-UPS using the strai...
Page 36 - INITIALIZE THE CC1
C1566M-C (10/05) 35 System Start-Up To start up your system you must complete the following tasks: 1. Install the CM9700-MGR on a PC connected to the CC1. Refer to System Device Connections in the Installation section for instructions on connecting a PC to the CC1. Refer to the CM9700-MGR Software G...
Page 37 - VERIFY SYSTEM OPERATION; INITIALIZE KEYBOARDS; DISPLAY THE CM9780-MXB SOFTWARE VERSION LEVEL
36 C1566M-C (10/05) VERIFY SYSTEM OPERATION 1. Power up all the remaining equipment. 2. After the CM9700-CC1 loads the configuration files, “SYSTEM 97XX” appears on the CM9760-KBD LCD. 3. Enter the default operator password on the CM9760-KBD keypad. “ENTER MONITOR #” appears on the LCD. 4. Enter 1, ...
Page 38 - MONITOR COLOR ADJUSTMENT
C1566M-C (10/05) 37 MONITOR COLOR ADJUSTMENT Once you have connected all devices and powered the system, you can use the System 9780 color bars as a reference tool for adjusting the color on each monitor. 1. Enter the monitor number, and then press the MON key. 2. Enter 999998, and then press the CA...
Page 39 - Programming Your System; Import Configuration Files:
38 C1566M-C (10/05) Programming Your System When you open CM9700-MGR, the Getting Started dialog box appears. Figure 28. Getting Started Dialog Box The CM9700-MGR provides the following configuration options: • Setup Wizard: This option opens the Setup Wizard (a series of dialog boxes), which provid...
Page 40 - GETTING HELP USING CM9700-MGR
C1566M-C (10/05) 39 GETTING HELP USING CM9700-MGR Instructions for how to use CM9700-MGR are provided throughout the software. The CM9700-MGR provides wizards to help users complete tasks, such as adding a device or a group. Each wizard screen contains instructions and explanatory text. Figure 29. S...
Page 41 - Operation; Switch Monitors
40 C1566M-C (10/05) Operation A brief description of System 9780 operation is provided here. OPERATING YOUR SYSTEM 9780 System 9780 can be operated with a CM9760-KBD or KBD300A keyboard. Operation instructions are provided below, but you should become familiar with the detailed instructions provided...
Page 42 - SYSTEM ARCHITECTURE
C1566M-C (10/05) 41 Appendix SYSTEM ARCHITECTURE HOW TO EXPAND YOUR SYSTEM The System 9780 provides a number of ways to expand your system to handle additional capacity. For example: • If you have a matrix bay that is not fully loaded, you can install additional video input cards (CM9780-VCC), up to...
Page 43 - INSTALLING ADDITIONAL MATRIX BAYS
42 C1566M-C (10/05) INSTALLING ADDITIONAL MATRIX BAYS When either more cameras and/or more monitors are needed than can be accommodated by one matrix bay (512 x 32), you can install additional matrix bays in either of the following configurations: • Sideframing—This option increases the number of av...
Page 47 - Downframe Card
46 C1566M-C (10/05) Downframe Card When you are downframing video, each downframed bay must be populated with CM9780-DFC cards. Set the termination jumpers in the unterminated position in each bay that is not the final device. Terminate the video signal at the final point in the downframe configurat...
Page 48 - HOW TO INSTALL OR REPLACE A CM9700-SER CARD IN THE CC1
C1566M-C (10/05) 47 HOW TO INSTALL OR REPLACE A CM9700-SER CARD IN THE CC1 If you have ordered a replacement or additional CM9700-SER serial communication card, complete the following steps to configure the jumpers on the CC1 board for the slot position the new SER card will occupy. 1. Turn off the ...
Page 53 - NETWORKING
52 C1566M-C (10/05) NETWORKING Networking of systems is required when any of the following conditions apply: • Two or more individual systems need to share video and control features. The CM9700-NW1 network interface unit (NIU) allows you to link any combination of the following systems into a netwo...
Page 54 - CONNECTING SATELLITE DEVICES; PROGRAMMING SATELLITE DEVICES
C1566M-C (10/05) 53 CONNECTING SATELLITE DEVICES You can connect a CM6800E-48X8 matrix switcher or a CM6700-SAT device to the System 9780. Refer to the CM9760-SAT Installation/Operation manual or to the CM6800E-48X8 Installation/Operation manual for instructions. The procedure for using a satellite ...
Page 55 - MOUNTING THE CM9780-MXB IN AN OPEN RACK; DOS ENVIRONMENT AND COMMAND REFERENCE; THE BOOT PROCESS
54 C1566M-C (10/05) MOUNTING THE CM9780-MXB IN AN OPEN RACK Figure 46. Mounting the CM9780-MXB in an Open Rack DOS ENVIRONMENT AND COMMAND REFERENCE DOS stands for Disk Operating System. Every time you turn on the CM9700-CC1 or every time you reboot (Alt +Ctrl +Del), the computer loads DOS from the ...
Page 56 - AUTOEXEC.BAT AND THE BOOT PROCESS; Invoking the CM9700 Executable; File Names and DOS
C1566M-C (10/05) 55 4. If the “hidden” files are present, IO.SYS loads first and executes. An initialization program called SYSINIT contained within IO.SYS reads in the MSDOS.SYS file; SYSINIT next locates the CONFIG.SYS file and executes its files for it to configure itself in memory. Then, SYSINIT...
Page 57 - DOS Commands; The Path Statement; Navigating the DOS Directory Tree
56 C1566M-C (10/05) DOS Commands DOS commands are divided into two groups. Because of the large number of DOS commands available, only the most commonly used commands are loaded into memory (RAM). The remaining commands reside in the DOS directory. The commands loaded into memory are called internal...
Page 58 - Example 1; Example 2
C1566M-C (10/05) 57 If you entered the same command again (CD..) at the c:\9700> prompt and pressed the ENTER key, you would finally end up again at the root directory as previously done. To proceed directly from the directory you are in to another directory, no matter where in the directory tree...
Page 59 - DOS REFERENCE; COMMAND; DIR
58 C1566M-C (10/05) DOS REFERENCE The following table provides a list of the most common DOS commands that you are most likely to use when operating the CC1. In addition, you can use the command HELP to access the MS-DOS command reference on the CC1. Table K. DOS Command Reference Directory NOTE: In...
Page 61 - Problems with the CC1
60 C1566M-C (10/05) Troubleshooting Problems with the CC1 Problems with the CC1 as part of a 9780 system may occur in the following areas: • The CC1 itself • Setup files (also known as configuration files) • Peripheral devices connected to the CC1 • DOS operating system A log is recommended for keep...
Page 62 - LED Indicators on the Power Supply Module
C1566M-C (10/05) 61 The VCC Card CF LED Is Illuminated and the AUX LED Is Blinking Problem: The LED labeled “CF” on the CM9780-VCC Video Input card is illuminated, and the LED labeled “AX” is flashing. Solution: Refer to Table N to interpret the flashing of the AX LED. Table N. CM9780-VCC Error Code...
Page 63 - Specifications
62 C1566M-C (10/05) Specifications CM9700-CC1 ELECTRICAL Input Voltage 120 VAC, 60 Hz or 230 VAC, 50 Hz, autoranging Power Consumption 57 watts Processor Pentium ® class CPU Clock Speed 733 MHz Memory 64 MB RAM Disk Drive 3.5-inch, 1.44 MB Flash Disk Storage 32 MB solid-state flash memory Diagnostic...
Page 65 - Regulatory Notices; RADIO AND TELEVISION INTERFERENCE
64 C1566M-C (10/05) Regulatory Notices CM9780-MXB This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may c...
Page 66 - PRODUCT WARRANTY AND RETURN INFORMATION
PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material orworkmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on FT/FR8000 Series fiber optic ...
