Pelco C1993M - Manual
Pelco C1993M – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – INSTALLATION
- Page 3 – Viewing Station Installation; CAMERA MOUNTING DETAIL
- Page 4 – REVISION HISTORY; Date; PRODUCT WARRANTY AND RETURN INFORMATION; WARRANTY
C1993M (2/01)
VIEWSTN/1
Viewing Station
®
This symbol indicates that danger-
ous voltage constituting a risk of
electric shock is present within this
unit.
This symbol indicates that there
are important operating and main-
tenance instructions in the litera-
ture accompanying this unit.
C A U T I O N :
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
IMPORTANT SAFEGUARDS AND WARNINGS
Prior to installation and use of this product, the following WARNINGS should be observed.
1.
Installation and servicing should only be done by qualified service personnel and conform
to all local codes.
2.
Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X, 6, or 6P enclosure,
it is designed for indoor use only and it must not be installed where exposed to rain and
moisture.
3.
Only use replacement parts recommended by Pelco.
4.
The installatioin method and materials should be capable of supporting four times the
weight of the unit and equipment.
The product and/or manual may bear the following marks:
Please thoroughly familiarize yourself with the information in this manual prior to installation and
operation.
DESCRIPTION
Pelco’s VIEWSTN/1 Public Viewing Station is specifically designed for retail applications to
provide a clear, visual warning to potential shoplifters that these premises are under surveillance.
When properly installed the station is an effective deterrent against shoplifting.
The VIEWSTN/1 includes:
Qty
Description
1
Monitor/camera mount
1
Mount arm
1
Monitor rack
1
Tube MS03-0202-2000 (anti-seize)
4
10-32 x .50 Allen head bolts and washers
2
5/16-18 x .75 Allen head bolts and locking washers
1
Color monitor and power cord
1
Color camera
3500 Pelco Way
Clovis, CA 93612-5699
USA
In North America & Canada:
Tel (800) 289-9100
FAX (800) 289-9150
International Customers:
Tel +1(559) 292-1981
FAX +1(559) 348-1120
www.pelco.com
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
INSTALLATION To properly install the VIEWSTN/1 Public Viewing Station refer to Figure 1 and do the following: 1 Prepare Wiring/Cabling a. Feed the monitor power cable through the top of the swivel collar and out the monitorfeedthrough hole. b. Feed the video cable (not provided) through the camera f...
Figure 1. Viewing Station Installation SET SCREW BOTTOM SWIVEL COLLAR, SET SCREW TOP SWIVEL COLLAR, SET SCREW SWIVEL COLLAR CAMERA MOUNTING DETAIL LIP CAMERA FEEDTHROUGH BACK OF MONITOR DETAIL MONITOR RACK DETAIL MONITORFEEDTHROUGH 00427
REVISION HISTORY Manual # Date Comments C1993M 2/01 Original version. Pelco, the Pelco logo, Camclosure, Esprit, Genex, Legacy, and Spectra are registered trademarks of Pelco. © Copyright 2001, Pelco. Endura and ExSite are trademarks of Pelco. All rights re served. PRODUCT WARRANTY AND RETURN INFORM...
