Page 2 - I N S T A L L A T I O N / O P E R A T I O N
® I N S T A L L A T I O N / O P E R A T I O N System 9770 C1555M-F (10/05)
Page 4 - Contents
C1555M-F (10/05) 3 Contents Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 List of Illustrations . . . . . . . . . . ....
Page 5 - List of Illustrations
4 C1555M-F (10/05) List of Illustrations 1 CM9770-MXB Mounting Baffle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 Mounting the CM9770-MXB on Top of the Mounting Baffle . . . ...
Page 6 - List of Tables
C1555M-F (10/05) 5 List of Tables A LEDs Illuminated During a Basic Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 B Data Connections—Single Node Systems Without a Hot Switch . . ....
Page 7 - Description
6 C1555M-F (10/05) Description The System 9770 is a full-featured video matrix switching control system that allows users to view and control up to 2,048 cameras and 512 monitors on a single node. The System 9770 has the following basic components: • CM9700-CC1—This is the system CPU; connect matrix...
Page 8 - MODELS; Controller and CPU Components; Matrix Bay
C1555M-F (10/05) 7 MODELS Controller and CPU Components CM9700-CC1 CPU controller; 120 VAC, 60 Hz or 230 VAC, 50 Hz. CM9700-SER Serial communication card (RS-422 SERCOM); provides 8 communications ports to interface peripheral equipment (4 maximum per CPU). CM9700-SER-32 Port expansion unit; 32 seri...
Page 10 - Installation; UNPACKING
C1555M-F (10/05) 9 Installation UNPACKING 1. Unpack and inspect all equipment, and verify delivery according to the packing slip. Before shipping, Pelco connects, tests, and programs each system according to the individual sales order. Contact Pelco immediately if there is any discrepancy in the equ...
Page 11 - MOUNTING
10 C1555M-F (10/05) MOUNTING Install the System 9770 in EIA-standard 19-inch (48.26 cm) racks. CM9770-MXB 1. Install the CM9770-MXB mounting baffle first (refer to Figure 1). The mounting baffle uses 1 rack unit (RU), and it has front and rear mounting ears, which are attached to the front and rear ...
Page 14 - VIDEO INPUT/OUTPUT CONNECTIONS; Installation Tips; Opening the CM9770-MXB Front Cover
C1555M-F (10/05) 13 VIDEO INPUT/OUTPUT CONNECTIONS The following steps provide an overview of how to connect video input and output sources. More complete procedures are provided in the subsequent sections. 1. Install the CM9770-VCC and CM9770-VMC cards in the matrix bay. Refer to the Installing Vid...
Page 17 - PERFORMING A BASIC LED CHECK; Front Panel Label
16 C1555M-F (10/05) PERFORMING A BASIC LED CHECK You should perform a basic LED check before you connect any video input or output to the matrix bay. The LED check allows you to ensure that the system is operating properly. 1. Turn on the power switch on the rear of the matrix bay. The front cover c...
Page 18 - INSTALLING REAR PANEL BNC CARDS
C1555M-F (10/05) 17 INSTALLING REAR PANEL BNC CARDS The following rear panel cards can be used with the CM9770-MXB matrix bay: • CM9770-RPC—the BNC card for video connections • CM9770-RPM—the BNC card for monitor connections • CM9770-DFC—this is a downframe card and cable assembly used to connect mu...
Page 19 - Change the Termination Jumpers on a Rear Panel Video BNC Card
18 C1555M-F (10/05) Change the Termination Jumpers on a Rear Panel Video BNC Card In a single-bay, non-looping configuration (up to 256 cameras and 32 monitors), the jumpers must be set in the terminated position. Refer to the Installing Additional Matrix Bays—Sideframing and Downframing section in ...
Page 20 - Looping Video
C1555M-F (10/05) 19 Looping Video When looping video out to another device (such as a DVR, VCR, or switcher), the connection instructions depend on the size of your system, as follows: • In a system containing 32 monitors or fewer (the video is not downframed), use the CM9700-VPP panels to loop the ...
Page 22 - VIDEO INPUT/OUTPUT CAPACITY; Single Bay
C1555M-F (10/05) 21 VIDEO INPUT/OUTPUT CAPACITY Single Bay A single CM9770-MXB can support up to 256 camera inputs (in increments of 32) and 32 monitor outputs (in increments of 16). Refer to Figure 12. Figure 12. Sample CM9770 System with 256 Cameras and 32 Monitors .................. CM9770 MXB CM...
Page 23 - Multiple Bays, Single Node; NOTE
22 C1555M-F (10/05) Multiple Bays, Single Node In a single-node system with one CM9700-CC1 (not networked), you can connect multiple CM9770-MXBs using “sideframing” and “downframing” for a maximum capacity of 2,048 camera inputs and 256 monitor outputs. • Sideframing—To expand the matrix video input...
Page 26 - Networked System
C1555M-F (10/05) 25 Networked System A networked system with multiple nodes uses an NIU (network interface unit) to combine up to 24 CM9700-CC1 systems into a network—each CC1 system is called a “node.” Multiple CM9770-MXB units can be connected to each CC1 through sideframing and downframing. An NI...
Page 27 - INSTALL A BACKUP POWER SUPPLY; REMOVE A BACKUP POWER SUPPLY
26 C1555M-F (10/05) THE POWER SUPPLY MODULE (CM9700-MPS) You can add a backup power supply module (CM9700-MPS) to a System 9770 matrix bay to provide redundancy to the bay’s power supply. INSTALL A BACKUP POWER SUPPLY 1. Open the matrix bay front cover. 2. Remove the blank-off plate from the empty p...
Page 28 - HOW TO REPLACE THE FUSE IN A POWER SUPPLY MODULE
C1555M-F (10/05) 27 HOW TO REPLACE THE FUSE IN A POWER SUPPLY MODULE The matrix bay is shipped from the factory configured for the correct input power. The power input panel, on the rear panel of the matrix bay, provides two separate power input receptacles, one for each power supply. Each power inp...
Page 29 - HOW TO TURN OFF THE AUDIBLE POWER SUPPLY ALARM
28 C1555M-F (10/05) HOW TO TURN OFF THE AUDIBLE POWER SUPPLY ALARM The power supply module contains an audible alarm, which operates in conjunction with the fault LEDs located on the power supply front panel. To turn off this alarm, complete the following steps: 1. Turn off the matrix bay power. 2. ...
Page 30 - SYSTEM DEVICE CONNECTIONS
C1555M-F (10/05) 29 SYSTEM DEVICE CONNECTIONS 1. Turn off power to all system devices and disconnect all power line cords while connecting system devices. 2. Complete the following steps to connect one or more CM9760-KBD system keyboards. a. Connect the keyboard to the CM9505-UPS using the straight ...
Page 35 - INITIALIZE THE CC1
34 C1555M-F (10/05) System Start-Up To start up your system you must complete the following tasks: 1. Install the CM9700-MGR on a PC connected to the CC1. Refer to System Device Connections in the Installation section for instructions on connecting a PC to the CC1. Refer to the CM9700-MGR Software G...
Page 36 - VERIFY SYSTEM OPERATION; INITIALIZE KEYBOARDS
C1555M-F (10/05) 35 VERIFY SYSTEM OPERATION 1. Power up all the remaining equipment. 2. After the CM9700-CC1 loads the configuration files, “SYSTEM 97XX” appears on the CM9760-KBD LCD. 3. Enter the default operator password on the CM9760-KBD keypad. “ENTER MONITOR #” appears on the LCD. 4. Enter 1, ...
Page 38 - Programming Your System; Import Configuration Files:
C1555M-F (10/05) 37 Programming Your System When you open CM9700-MGR, the Getting Started dialog box appears.. Figure 27. Getting Started Dialog Box The CM9700-MGR provides the following configuration options: • Setup Wizard: This option opens the Setup Wizard (a series of dialog boxes), which provi...
Page 39 - GETTING HELP USING CM9700-MGR
38 C1555M-F (10/05) GETTING HELP USING CM9700-MGR Instructions for how to use CM9700-MGR are provided throughout the software. The CM9700-MGR provides wizards to help users complete tasks, such as adding a device or a group. Each wizard screen contains instructions and explanatory text. Figure 28. S...
Page 40 - Operation; Switch Monitors
C1555M-F (10/05) 39 Operation A brief description of System 9770 operation is provided here. OPERATING YOUR SYSTEM 9770 System 9770 can be operated with a CM9760-KBD or KBD300A keyboard. Operation instructions are provided below, but you should become familiar with the detailed instructions provided...
Page 41 - Appendix; SYSTEM ARCHITECTURE
40 C1555M-F (10/05) Appendix SYSTEM ARCHITECTURE The System 9770 is similar to Pelco’s System 9760 but uses different matrix bay hardware and provides more features. Users familiar with the System 9760 should note the following differences: • Each System 9770 video input card (CM9770-VCC) receives i...
Page 42 - INSTALLING ADDITIONAL MATRIX BAYS—SIDEFRAMING AND DOWNFRAMING; Sideframing
C1555M-F (10/05) 41 INSTALLING ADDITIONAL MATRIX BAYS—SIDEFRAMING AND DOWNFRAMING When either more cameras and/or more monitors are needed than can be accommodated by one matrix bay (256 x 32), you can install additional matrix bays in either of the following configurations: • Sideframing—This optio...
Page 45 - Downframe Cards
44 C1555M-F (10/05) A downframe cable is used to connect the bottom connector of the RPC card to a downframe card. Figure 33. DFC Cable Downframe Cards The following downframe cards are available for the System 9770: • CM9770-DFC—This is the “no looping” downframe card. • CM9770-DFL—This is the “loo...
Page 47 - HOW TO INSTALL OR REPLACE A CM9700-SER CARD IN THE CC1
46 C1555M-F (10/05) HOW TO INSTALL OR REPLACE A CM9700-SER CARD IN THE CC1 If you have ordered a replacement or additional CM9700-SER serial communication card, complete the following steps to configure the jumpers on the CC1 board for the slot position the new SER card will occupy. 1. Turn off the ...
Page 52 - NETWORKING
C1555M-F (10/05) 51 NETWORKING Networking of systems is required when the following conditions apply: • Two or more individual systems need to share video and control features. The CM9700-NW1 network interface unit (NIU) allows you to link any combination of the following systems into a network:– On...
Page 53 - CONNECTING SATELLITE DEVICES; PROGRAMMING SATELLITE DEVICES
52 C1555M-F (10/05) CONNECTING SATELLITE DEVICES You can connect a CM6800E-48X8 matrix switcher or a CM9760-SAT device to the System 9770. Refer to the CM9760-SAT Installation/Operation manual or to the CM6800E-48X8 Installation/Operation manual for instructions. The procedure for using a satellite ...
Page 55 - MOUNTING THE CM9770-MXB IN AN OPEN RACK
54 C1555M-F (10/05) MOUNTING THE CM9770-MXB IN AN OPEN RACK Figure 46. Mounting the CM9770-MXB in an Open Rack
Page 56 - DOS ENVIRONMENT AND COMMAND REFERENCE; THE BOOT PROCESS; Invoking the CM9700 Executable
C1555M-F (10/05) 55 DOS ENVIRONMENT AND COMMAND REFERENCE DOS stands for Disk Operating System. Every time you turn on the CM9700-CC1 or every time you reboot (Alt +Ctrl +Del), the computer loads DOS from the CC1 disk into the memory (RAM). Once loaded DOS lets you run other programs, in particular,...
Page 57 - The Path Statement; Navigating the DOS Directory Tree
56 C1555M-F (10/05) File Names and DOS File names in DOS are limited to eight characters. If you issue a command to change the name of the configuration files in the 9700 directory to a name exceeding eight characters, the name is truncated to eight characters. The Windows-based CM9700-MGR program d...
Page 58 - Example 1; Example 2
C1555M-F (10/05) 57 If you entered the same command again (CD..) at the c:\9700> prompt and pressed the ENTER key, you would finally end up again at the root directory as previously done. To proceed directly from the directory you are in to another directory, no matter where in the directory tree...
Page 59 - DOS REFERENCE; COMMAND; DIR
58 C1555M-F (10/05) DOS REFERENCE The following table provides a list of the most common DOS commands that you are most likely to use when operating the CC1. In addition, you can use the command HELP to access the MS-DOS command reference on the CC1. Table K. DOS Command Reference Directory NOTE: In...
Page 61 - Problems with the CC1; The VCC Card CF LED Is Illuminated and the AUX LED Is Blinking
60 C1555M-F (10/05) Troubleshooting Problems with the CC1 Problems with the CC1 as part of a 9770 system may occur in the following areas: • The CC1 itself • Setup files (also known as configuration files) • Peripheral devices connected to the CC1 • DOS operating system A log is recommended for keep...
Page 62 - Switch 1
C1555M-F (10/05) 61 Monitor Display Problems Problem: Text characters (such as in camera titles) do not display properly. Solution: The CM9770-VMC monitor output card in the matrix bay may not be set for the correct video format (NTSC or PAL). Check switch 1 on the DIP switch and verify that the swi...
Page 63 - Specifications
62 C1555M-F (10/05) Specifications CM9700-CC1 ELECTRICAL Input Voltage 120 VAC, 60 Hz or 230 VAC, 50 Hz, autoranging Power Consumption 57 watts Processor Pentium ® class CPU Clock Speed 733 MHz Memory 64 MB RAM Disk Drive 3.5-inch, 1.44 MB Flash Disk Storage 32 MB solid-state flash memory Diagnostic...
Page 65 - Regulatory Notices; RADIO AND TELEVISION INTERFERENCE
64 C1555M-F (10/05) Regulatory Notices CM9780-MXB This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may c...
Page 66 - PRODUCT WARRANTY AND RETURN INFORMATION
PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material orworkmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on FT/FR8000 Series fiber optic ...
