Panasonic EAH AZ100L - User Manual

*1 If you use EAH-AZ100, select “Technics EAH-AZ100”. If you use EAH-AZ80, select “TechnicsEAH-AZ80”. If you use EAH-AZ40M2, select “Technics EAH-AZ40M2”. 2nd Press for 5~8 s *1 12 Quick start guide

Part names and functions EAH-AZ100 Earphones 1 5 7 2 4 1 7 3 4 6 6 L R 1. Microphones for calls/Microphones for noise cancelling2. Touch sensor (L) (left) R Operate the earphone by touching. 3. Touch sensor (R) (right) R Operate the earphone by touching. 4. Charging terminals5. Raised dot indicating...

Status Indicator LEDs LED type Chargingcradle status LED color/pattern Status description Charging cradlestatus indicatorLED Charging Off Fully charged *1 Flashing green Sufficient charge Low charge Flashing yellowFlashing red When the lid ofthe chargingcradle is opened Green (about 3seconds) Suffic...

R The device cannot charge properly if there is dust or water droplets on the charging terminal,earphones, or charging cradle terminal section. Remove dust and water droplets beforecharging.“Clean the charging terminals of the earphones”, Page 67“Clean the charging cradle terminal section”, Page 67 ...

R Charging for the earphones is complete when the earphone status indicator LED turns off. R Charging for the charging cradle is complete when the charging cradle status indicatorLED turns off. R Charging time (the time from empty to full charge) Charging the earphones andcharging cradle at the same...

R Depending on your wireless charger, charging may be slower or may stop at high or lowtemperatures. Also, although the earphones and charging cradle may get warm while andafter charging, it is not a malfunction. Turn the earphones on/off Turn on 1 Take out the earphones from the charging cradle. R ...

1 Remove the earpiece. R Hold the earpiece and pull out while twisting slightly. 2 Attach the earpiece. R Make sure that the earpiece is firmly attached and not slanted. Note: R The size of the earpieces that fit your ears may differ between the left and right. R Select the earpieces that provide th...

{{"Apple Store"|tolink("https://itunes.apple.com/app/id1498029651")}} 2 Launch the [Technics Audio Connect] app. 3 Tap the product you want to pair. 4 Follow the on-screen instructions. Pair with a Bluetooth ® device without the app You can pair without using the [Technics Audio Conn...

Note: R Voice assistant features may not activate depending on the smartphone specifications and theapp version. R For details about voice commands for the voice assistant feature, please refer to the manualof the Bluetooth ® device that uses the voice assistant feature. When using Amazon Alexa as a...

Use the touch sensors You can use the touch sensors on the earphones to operate the earphones, or remote controlBluetooth ® devices connected to the earphones. Function Touch sensor gestureL R Music Playback/Pause Single tap Single tap Decrease volume Double tap - Increase volume Triple tap - Next t...

Function Touch sensor gestureL R Activate voice assistant Tap and hold for about 2 seconds - Set to Bluetooth ® pairing mode “Pair the earphones with a subsequentBluetooth ® device without the app”, Page 31 Reset to factory settings “Reset to factory settings”, Page 62 Note: R You can change the tou...

Home screen Connected codec R Displays the codec of the Bluetooth ® device connected to the headphones. It may not be displayed depending on the Bluetooth ® device. Amazon Alexa (EAH-AZ80/EAH-AZ60M2) R Displayed when [Use voice commands to start Alexa] for Amazon Alexa is on.“When using Amazon Alexa...

Note R Displayed when there is a notification (such as an update). You can tap it to view thenotifications. Connected headphonesRemaining earphone chargeRemaining charging cradle chargeExternal sound control setting R You can tap it to set external sound control.“Set external sound control”, Page 40...

Set sound enhancement 1 In the home screen of the [Technics Audio Connect] app, tap [SOUND] . 2 Select and tap a sound enhancement. R You can select an option such as Bass Enhancer or Clear Voice. R In Custom, you can set 5 sound ranges. Move up or down to adjust the level. Play a sound to find the ...

Important: R When playing a sound to find your earphones, the sound will not play if the headphones areoff. Set the auto power off setting to [Always on] in advance. “Set auto power off”, Page 45 1 In the home screen of the [Technics Audio Connect] app, tap [Find headphones] . Or tap [SETTINGS] ® [F...

R Customize voice prompt: Select the voice prompt and notification volume, and externalsound control and device connection messages. R Headphone name: Edit the name displayed on the home screen. R Body color: Select the color of the earphones displayed on the home screen. 3 Follow the on-screen inst...

Note: R This unit complies with the “High Resolution Audio” standard of the Japan Audio Association. R To enjoy wireless high-resolution quality (sound quality certified by the high-resolution wirelesslogo), use a playback device with the high-resolution wireless logo and set the Bluetooth ® sound q...

5 Select and tap a function.Example) Changing to [Volume: Reduce] 6 Tap [Confirm] . Note: R To reset to default settings, tap [Return to default values] , and then tap [OK] . Customize external sound control switching The mode switches every time you touch and hold the touch sensor (R) on the earpho...

Select a voice assistant 1 In the home screen of the [Technics Audio Connect] app, tap [SETTINGS] . 2 Tap [Select voice assistant] . 3 Select a voice assistant. 4 Follow the on-screen instructions. Set maintenance notifications Regular maintenance is required to use this unit comfortably.You will be...

Important: R While the firmware is updating, place the headphones and your smartphone close togetherand wait without using them. The update may be interrupted or delayed if there is musicplaying or a call during the update. 1 In the home screen of the [Technics Audio Connect] app, tap [SETTINGS] . 2...

Troubleshooting Before requesting repair: R Update the firmware. R Resetting to factory settings may resolve the problem. R Refer to “FAQ”.{{"https://av.jpn.support.panasonic.com/support/technics/product-faq/AZ3/index.html"|tolink("https://av.jpn.support.panasonic.com/support/technics/pr...

The wear sensors don’t work. (EAH-AZ80/EAH-AZ60M2) R The wear sensors may not work if they are dirty or moist. Wipe off any dirt and moisture with adry, soft cloth. The charging cradle status indicator LED does not turn on (about 3 seconds) even afterthe lid is opened. R The battery has no charge. C...

Q09. Cannot turn on location services (Android™ devices only) R Location services may not turn on if battery saving mode is on in the Android location settings.Set Android’s location settings to a mode other than battery saving.(The specifications of the location service mode depend on the Android™ ...

1 Put both earphones (L and R) into the charging cradle and charge for about 15 minutes. 2 Take out earphone (R) from the charging cradle and wear it. 3 When you hear the startup sound of earphone (R), touch and hold touch sensor (R). (Do notrelease your finger even when you hear the message.) 4 Whe...

The illustrations use EAH-AZ60M2 as an example. 2 1 1. Earpiece2. Protective mesh R If it is very dirty, firmly wring a cloth soaked in water, wipe off the dirt, and then wipe with a drycloth. R Do not use solvents such as benzine, thinner, alcohol, kitchen detergent, or chemical wipesbecause they m...

5 Attach the earpiece. R Make sure that the earpiece is firmly attached and not slanted. Clean the charging terminals of the earphones Use a cotton swab with a pointed tip (such as for make-up) to wipe off dirt from the chargingterminals of the earphones.The illustrations use EAH-AZ60M2 as an exampl...

The illustrations use EAH-AZ60M2 as an example. A A B B B Put the cotton swab on the tip of the contact pin (B) from above.Stroke the tip of the contact pin with a cotton swab to wipe off dirt. Note: R Do not apply force to the contact pin from the side or at an angle. (It may result in malfunction....

About Bluetooth ® Panasonic bears no responsibility for data and/or information that is compromised duringa wireless transmission.Frequency band used This unit uses the 2.4 GHz frequency band. Certification of this unit R This unit conforms to frequency restrictions and has received certification ba...

Recommended operating environment The following is the recommended operating environment to correctly display this document. (Asof September 2023) When displaying on a computer – Latest stable build of various modern browsers When displaying on a smartphone – iOS 13.0 or later– Android 8.0 or later ...