Page 2 - Call waiting; Content
2 Content Pack Contents ...................................................................................................... 3 IMPORTANT SAFETY INFORMATION ............................................................... 4 GETTING STARTED................................................................
Page 3 - Pack Contents; Purchasing additional handsets
3 OTHER FEATURES........................................................................................... 18 Key lock .............................................................................................................. 18 Shortcut to turn handset ringer on/off ..............................
Page 4 - This telephone is not designed for making emergency
4 IMPORTANT SAFETY INFORMATION • Avoid exposure of this telephone to moisture or liquid. • To prevent electric shock, do not open the handset or base cabinet. • Avoid metallic contact (e.g. metal clips, keys) between the battery contacts and charging conductors. • There is a slight chance that the t...
Page 5 - GETTING STARTED; Key Layout
5 GETTING STARTED Key Layout ¿ / Ringer On-Off LCD Display Talk / Recall Redial CID / Scroll backward Delete / Mute Program / OK Page # / Keylock / Pause Intercom / Conference Off / Exit Phonebook CID / Scroll forward
Page 7 - Figure 1
7 Basic steps to install This phone is not fully weather-sealed or waterproof. Its special construction provides protection against splashes and dripping water. Any water or liquid exposure other than the above may result in serious damage to the phone. THE BASE AND CHARGE POD ARE NOT WATER RESISTAN...
Page 8 - Wall mounting the base and charger; The phone base units are suitable for wall mounting. Use two screws; Charging the handset; cradle. The handset battery icon
8 Wall mounting the base and charger 1. Turn the base over. 2. Attach the mounting bracket to the base as indicated. 3. The phone base units are suitable for wall mounting. Use two screws (not supplied) for fixing. Drill two holes horizontally side by side, 64mm apart for main base and 48mm for char...
Page 9 - LOW BATT; BASIC OPERATIONS
9 charge. This is normal. A handset reaching a very low battery voltage level will go into sleep mode, displaying LOW BATT on the screen. It is good practice to replace the handset on the base unit to charge when it is not in use to ensure the handset is always fully charged. RISK OF EXPLOSION IF BA...
Page 10 - Making an external call; Predialing; DEL; EXIT; Dialling from a phonebook record; Redialling the last dialled number; OK; During an external call
10 Making an external call Your phone allows you to dial out a phone number in various ways. Normal dialling 1. Press and wait for the dial tone. 2. Use the number pad to dial the phone number. The display shows the digits as you enter them. 3. When you enter more than 12 digits, turns on. In this c...
Page 11 - Adjusting the volume; ooo; Taking two calls at the same time
11 The call timer will be displayed a short while after your call is connected. It shows the duration of the call. This timer is shown in minutes and seconds (MM-SS) in the first hour. After that, it will be shown in hours and minutes (HH-MM) with the “-“blinking to indicate the seconds. When you en...
Page 12 - CALLER ID; Reviewing CID records; Call back from a CID record
12 During a call, you will hear a loud tone the two loud beeps periodically to notify you of another incoming call. If you wish to answer this call 1. Press listen for dial tone then Press 2 to put the current call on hold and talk with the second caller. 2. Subsequent presses of listen for dial ton...
Page 13 - LAST NUMBER DIALED; Viewing the last number dialled
13 2. If there is caller name in the CID record, the first 8 characters are displayed for you to edit. If no caller name is available, you will be prompted to enter a name. 3. Press OK to save the name. You will not be able to save it if this name already exists in the phonebook. Edit the name and t...
Page 14 - Deleting a previously dialled number; USING THE PHONEBOOK; Adding phonebook records
14 3. Press OK to save the name. You will not be able to save it if this name already exists in the phonebook. Edit the name and try again. 4. Edit the number if necessary and press OK to save it. You have saved the number as a phonebook record. This record in the redial list will now show the name ...
Page 15 - PROGRAMMING THE PHONE; Handset Ringer Melody & volume
15 6. Press OK to confirm number change. Repeat steps 1 to 6 to edit another record. Deleting a phonebook record 1. During standby mode, press . 2. Press e or f to search for the record that you would like to delete. Or you can use the number keys to jump directly to the record starting with the cor...
Page 17 - Deregister; MUTE
17 3. Before you enter the PIN, press and hold on the base for 2 seconds until a registration tone is emitted. The base is now in the registration mode. (If the base is full and cannot take on any more handset, it will emit a reject tone instead. See the section of Deregister to delete a currently r...
Page 18 - OTHER FEATURES; Key lock; PRESS OK; Message waiting indication; Paging the handsets
18 OTHER FEATURES Key lock Press and hold during standby to lock the keypad. appears whenever keypad is locked. When the keypad is locked, you can still answer an incoming call by pressing . During the call, the keypad functions as normal. When the call is ended, the keypad will be locked again. To ...
Page 19 - MULTI-HANDSET OPERATION; Answering an internal call; Inquiry call
19 MULTI-HANDSET OPERATION You can use these useful features if you have 2 or more handsets registered to the base. Answering an internal call When you receive an intercom call, your handset will ring with blinking. You can see the calling handset number on the screen. If you press when the phone is...
Page 20 - TROUBLESHOOTING; Problems Solutions
20 During the conference call, pressing CONF will put the external line on hold and you can talk to the other handset in private. Press and hold CONF to establish the conference call again. Any handset hangs up during a conference call will leave the other handset still connecting with the external ...
Page 21 - NOTES FOR OPERATION IN NEW ZEALAND; Caller ID
21 NOTES FOR OPERATION IN NEW ZEALAND The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with the minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any...
Page 22 - WARRANTY INFORMATION
22 WARRANTY INFORMATION This product is covered by a 12 month warranty against defective workmanship or parts. The warranty does not extend to damage caused by misuse, negligence, excessive voltage, faults on the telephone line or lightning. This guarantee in no way affects your statutory rights. Fu...
