Page 3 - Contents; Introducing Bluetooth
1 Contents Contents Getting started ...............................................2 Getting to know your phone ...........................6 Introducing Bluetooth ® wireless technology .12 Calls ............................................................16 Intercom ....................................
Page 4 - Important; CAUTION; GettinG started
2 Important • Avoid exposure of this telephone to moisture or liquid.• To prevent electric shock, do not open the handset or base cabinet.• Avoid metallic contact (e.g. metal clips, keys) between the battery contacts and charging conductors. • There is a slight chance that the telephone could be dam...
Page 5 - Location; Handset range; Connect the Base Station; Signal strength; HANDSET 1
3 GettinG started Location You need to place your BT9500 base within 2 metres of the mains power socket and telephone socket so that the cables will reach.Make sure it is at least 1 metre away from other electrical appliances to avoid interference. Your unit works by sending radio signals between th...
Page 6 - Install and Charge the Batteries; Battery low warning; WARNING
4 Install and Charge the Batteries 1) Slide the battery compartment cover off the back of the handset. 2) Insert the rechargeable battery pack as shown with the battery plugged into the small socket in the battery compartment. 3) Slide the battery compartment cover back on the handset. 4) Put the ha...
Page 7 - Purchasing additional handsets
5 • Avoid contact with metal objects when handling the battery. These objects could short out the batteries or cause the conductor to overheat resulting in burns. • Do not attempt to recharge the battery cell by heating it. Sudden release of battery electrolyte can cause burns or irritation to the e...
Page 8 - Handset Overview; GettinG to know your phone
6 Handset Overview 1 8 67 9 2 3 4 5 13 14 12 11 10 1 Earpiece2 Scroll up/ Volume up/ Phonebook In idle mode: press to access the phonebook.In menu or list mode: press to scroll up. In editing mode: press to move the cursor to the right.During a call: press to increase volume. 3 INT Intercom Press fo...
Page 10 - Base Station Overview
8 Base Station Overview + - Vol Vol 1 8 6 7 9 2 3 4 5 11 10 12 13 1 BLUETOOTH LEDs Steady ON: Bluetooth device is paired to the base. Flashes: Bluetooth device is in pairing set-up mode. Off: If Bluetooth device is disconnected. 2 IN USE LED Flashes when there is an incoming call, or a cordless hand...
Page 11 - Handset LCD Display
9 8 SKIP BACKWARD Press to repeat playing the current message. Press twice to playback the previous message. 9 VOLUME – During message playback: press to decrease the speaker volume. In idle: press to decrease the base ringer volume. 10 SKIP FORWARD During message playback: press to skip to the next...
Page 12 - Message counter display
10 On when you have a new Voice Mail message.(This is a caller display service and is not usually available from UK network providers.) On when viewing a new call entry in the call log. On steadily when Bluetooth device #1 or #2 is connected with the telephone base. Full battery power level. 2/3 bat...
Page 14 - Glossary of terms; IMPORTANT INFORMATION; introduCinG Bluetooth
12 Introducing Bluetooth wireless technology Your new telephone system with Bluetooth wireless technology has the following features: • Up to two Bluetooth devices can be paired with the telephone base, and they can be two Bluetooth enabled mobile phones or one mobile phone plus one headset. • Conne...
Page 15 - Bluetooth setup
13 • Make sure that your Bluetooth enabled mobile phone has sufficient signal strength. You may need to move the Bluetooth enabled mobile phone and telephone base to a location where the mobile signal may be stronger. • Charge your Bluetooth mobile phone while it is connected to the telephone base b...
Page 16 - NOTE
14 NOTE Only Bluetooth headsets with password 0000 can be paired with the telephone base system.When a device is successfully connected, the Bluetooth LED for the button selected will be turned on, and the Bluetooth status icon will display on the handset screen. The number 1 and/or 2 will also be d...
Page 18 - Make a HOME call; NOTES; End a HOME call; Calls
16 Calls Make a HOME call • Press TALK/R or SPEAKER, and then enter the telephone number. Predial a call • Enter the telephone number. Press MUTE/CLEAR or TALK OFF/ BACK to make corrections when entering the phone number. • Press TALK/R or SPEAKER to dial. Answer a HOME call • Press TALK/R or SPEAKE...
Page 20 - Volume control; Mute; Temporary ringer silencing
18 Volume control Press UP/DOWN to adjust the listening volume when on a call. Each press of the button increases or decreases the volume level by one step. NOTES 1. All volume settings (handset and speakerphone) are independent. 2. When the volume reaches the minimum or maximum setting, you will he...
Page 22 - Intercom; Call another handset; interCom
20 Intercom If you have more than one handset registered to your base, use theintercom feature for conversations between handsets. Call another handset 1. From idle mode, press the intercom button INT, (or press MENU/OK, then UP/DOWN to INTERCOM and press MENU/OK to select.) • If you have a two-hand...
Page 24 - PHONEBOOK; Store a phonebook entry; phoneBook
22 PHONEBOOK The phonebook can store up to 100 entries with up to 30 digits for each phone number and 15 characters for each name. • Phonebook entries are shared by all system handsets. Any additions, deletions or edits made on one handset affect the phonebook on all handsets. • When there are no re...
Page 25 - Alphabetical search; Dial a phonebook entry
23 Alphabetical search To start an alphabetical search: 1. Press PHONEBOOK when the handset is not in use. 2. Use the dialling keys to enter the letters associated with the name. For example, if you have name entries Jenny, Kristen and Linda in your phonebook, press 5 (JKL) once to find Jenny, twice...
Page 26 - CALLER ID; Call log; Missed calls indicator; Review the call log; Caller id
24 CALLER ID This feature is available if you have subscribed to the Caller IDIdentification service with your network service provider. Caller ID lets you see the phone number of your callers on the handset display, before you answer a call and in your call log afterwards. Your phone can store up t...
Page 27 - Dial a call log entry; Delete from the call log
25 4. Press UP/DOWN to browse through the call log.• The name (if available), telephone number, date and time of each incoming call is shown on the screen, along with the HOME or MOBILE icon to indicate the source of the caller id. • You hear a double beep when the list reaches the beginning or end ...
Page 28 - REDIAL LIST; Dial a redial entry; Delete from redial; redial list
26 REDIAL LIST The telephone stores the five most recently dialled numbers.• When there are already five entries, the oldest entry is deleted to make room for the new entry. • Entries are shown in reverse chronological order. • Press REDIAL to browse the redial list. Dial a redial entry 1. Press RED...
Page 29 - PERSONAL SETTINGS; Set date and time; Set the time format; personal settinGs
27 PERSONAL SETTINGS Using the feature menu, you can customise many of the telephone’s settings. 1. Press MENU/OK when in idle mode (when the phone is not in use) to enter the feature menu. 2. Use UP/DOWN to scroll to the feature to be changed. When scrolling through the menu, the top menu item is a...
Page 30 - To Change Settings; Ringer tone; Language
28 To Change Settings Ringer volume You can set the ringer volume level (1-6), or turn the ringer off. When turned off, the <RINGER OFF> icon appears on the handset screen. 1. Press MENU/OK when in idle mode to enter the menu list.2. Press UP/DOWN to scroll to >RINGER VOLUME.3. Press MENU/O...
Page 31 - Set the Recall time; Clear voicemail indication; ECO PLUS mode; Change system PIN
29 Set the Recall time You may need to change the recall (flash) time if your phone is connected to a PBX. The recall time options are SHORT(100ms), MEDIUM(300ms) or LONG(600ms). 1. Press MENU/OK when in idle mode to enter the menu list.2. Press UP/DOWN to scroll to >FLASH TIME.3. Press MENU/OK a...
Page 32 - Reset Your Phone; Paging; To stop the paging tone:
30 Reset Your Phone You can reset your phone to the default settings. A reset returns all your personal settings to their defaults, except for the system PIN, and clears your redial list, call log and answering machine messages, but keeps your phonebook entries. 1. Press MENU/OK when in idle mode to...
Page 33 - REGISTRATION; Register a handset; De-register a handset; reGistration
31 REGISTRATION IMPORTANT: When you purchase your phone all handsets are already registered to the base, so you do not need to register them.Handset registration is only necessary when you buy extra handsets or if a handset becomes faulty. Your new telephone system can accommodate up to 6 handsets. ...
Page 34 - Turn on or off the answering machine; To turn on or off with a handset:; usinG your answerinG maChine
32 USING YOUR ANSWERING MACHINE The answering machine records unanswered calls when it is activated. It can store up to 99 messages within the maximum recording time of 14 minutes. Turn on or off the answering machine The answering system must be turned on to answer and record messages. When the ans...
Page 35 - Delete all old messages; To delete all old messages with a handset:; Record and play memos
33 To play messages with the telephone base: 1. Press Play/Stop. 2. During message playback, press below keys to perform the following functions: • Play/Stop: Press to stop playing messages or resume playback.• Skip Backward: Press once to replay current message from the beginning. Press twice to pl...
Page 36 - Answer machine settings; Set the answer delay; OGM settings
34 Answer machine settings Set the answer mode You can set the answering machine to answer and record message(ANSWER & RECORD) or to just answer a call and play an outgoingmessage, but not allow the caller to leave a message (ANSWER ONLY)1. Press MENU/OK when in idle mode to enter the menu list....
Page 37 - Turn on/off the message alert; Remote access
35 Play the outgoing message 1. Follow steps 1 to 4 in “Record the outgoing message”. 2. Press MENU/OK and UP/DOWN to select PLAY.3. Press MENU/OK and UP/DOWN to select ANSWER & RECORD or ANSWER ONLY. 4. Press MENU/OK and the message will be played.5. Press TALK OFF/BACK to stop playing. Turn on...
Page 39 - Troubleshooting; appendix
37 Troubleshooting Problem Possible cause(s) Solution(s) No dial tone on the cordless handset. 1. The base unit is not properly connected.2. Too far from the base unit.3. Battery charge is low.4. Incorrect battery polarity.5. Re-register handset. 1. Check CONNECTION to power and telephone line. 2. M...
Page 43 - TRADEMARKS
41 In the unlikely event that your Oricom product has a recurring failure, Oricom, at its discretion, may elect to provide you with a replacement product of its choosing that is at least equivalent to your product in performance. Oricom does not warrant that the operation of the product will be unin...
Page 44 - Customer Support; Australia
Customer Support If you suspect your product is not functioning to specification, before making a warranty claim please use the following resources. - Troubleshooting Guide in this user guide - Online Frequently Asked Questions - www.oricom.com.au - Email our customer support team at support@oricom....
