Page 3 - Content
3 Content SAFETY INFORMATION ............................................................................................. 5 GETTING STARTED ................................................................................................... 6 Key Layout .................................................
Page 5 - SAFETY INFORMATION; Use only the batteries supplied with this telephone.
5 This telephone is not designed for making emergency telephone calls when the power fails. Make alternative arrangements for access to emergency services. SAFETY INFORMATION Read the safety instructions before first use of this phone. • Use only the batteries supplied with this telephone. • Do not ...
Page 6 - GETTING STARTED
6 GETTING STARTED Key Layout LCD Display Phonebook Redial Talk / Recall CID / Scroll backward ¿ / Ringer On-Off OK / Program Mute / Delete # / Keylock / Pause CID / Scroll forward Off / Exit Intercom / Conference
Page 7 - LCD display on the handset
7 LCD display on the handset The handset is linked to the base Displays the current battery level. It scrolls during charging. Appear together with either handset or base ringer setting. Use to set the handset ringer. Use to set the base ringer. Use to set the recall duration. Use to register the ha...
Page 9 - Charging the handset; scrolls during charging. Handset may take; BASIC OPERATIONS; record is received, the caller information is displayed.
9 Charging the handset An empty battery icon indicates the batteries need recharging. Place the handset on the base cradle to recharge the batteries. You should hear a parking tone (double beep) when handset is put on the charging cradle. The handset battery icon scrolls during charging. Handset may...
Page 10 - Making an external call; Normal dialling; Dialling from a phonebook record; OK
10 If you press when the phone is ringing, the handset ringer will be turned off for this incoming call. 1. Press to answer the call. turns on. 2. Call timer is displayed 10 seconds after the call is connected 3. Press or place the handset on the base cradle to disconnect. Making an external call Yo...
Page 11 - Redialling the last dialled number; During an external call; Call timer; Muting the call; MUTE; Chain dialling
11 Redialling the last dialled number 1. Press . The last number dialled is displayed. 2. turns on when the number contains more than 12 digits. Press OK to view the off-page digits. 3. Press to dial out the number. During an external call Call timer The call timer will be displayed a short while af...
Page 12 - Receiving a second call; CALLER ID; Reviewing CID records; Call back from a CID record
12 Receiving a second call If you have subscribed to the service of CID on Call Waiting, the telephone will show the phone number of another incoming call while you are talking on the phone. 1. Press to put the current call on hold and talk with the second caller. 2. Subsequent presses of will toggl...
Page 13 - LAST NUMBER DIALLED; Storing a previously dialled number into phonebook
13 While you are viewing the CID record that you would like to save, 1. Press . 2. If there is caller name in the CID record, the first 8 characters are displayed for you to edit. If no caller name is available, you will be prompted to enter a name. 3. Press OK to save the name. You will not be able...
Page 14 - Deleting a previously dialled number; USING THE PHONEBOOK; Adding phonebook records
14 DEL to do the editing. A name can contain up to 8 characters. If there’s already a phonebook record matching the number, that phonebook name will appear and you can edit it. 3. Press OK to save the name. You will not be able to save it if this name already exists in the phonebook. Edit the name a...
Page 16 - Deleting the entire phonebook; PROGRAMMING THE PHONE; Handset ringer melody & volume
16 5. Press OK to confirm. Repeat steps 1 to 5 to delete another record. Deleting the entire phonebook 1. While reviewing the phonebook, press and hold DEL . 2. Press OK when prompted to confirm the action. The phonebook is now empty. PROGRAMMING THE PHONE Press PROG during standby to enter program ...
Page 17 - UNAVAIL; Recall duration; Deregister
17 2. Press OK to select. 3. Press to listen to and select from the 5 melodies. 4. Press OK to confirm your selection and you will be prompted to volume Setting. 5. Press to listen to and select from the different volume levels. 6. Press OK to confirm your selection. You have the option to turn off ...
Page 18 - NOT REG; RESET
18 You will hear a confirmation tone if the registration is successful. The handset label and the handset number will be displayed. If the registration is not successful, you will see NOT REG on the handset. Follow the procedure and try again. Deregister A handset can deregister another handset regi...
Page 19 - DIGITAL ANSWERING MACHINE
19 DIGITAL ANSWERING MACHINE Pin OGM 7-Segment Display Memo Ring Answer Machine On / Off Volume Up / Scroll Up Call Screening / Next Message Volume Down / Scroll Down Stop / Play Message Alert / Previous Message Page Mic Delete
Page 21 - On; if the; Of; if the answering machine is; FU
21 To turn the answering machine on/off, 1. Press during standby mode. The 7-segment LCD displays On if the answering machine is activated or Of if the answering machine is deactivated. The 7-segment LCD will be on when the answering machine is turned on. When the answering machine is on, it will an...
Page 22 - OGM
22 When memory is full, no incoming message will be recorded. The answering machine will announce the following outgoing message (OGM) and release the line. “ Hello, we’re sorry your call cannot be taken at the moment, and you cannot leave a message, so please call later. ” Recording an OGM The maxi...
Page 23 - Playing ICM; Deleting an ICM
23 recording, if the call is answered by a registered handset or a parallel phone, the recording will stop. Playing ICM ICM will be played back in the sequence they were recorded. A beep will be emitted at the end of each ICM. To playback ICM, 1. Press . The oldest message will begin playing. During...
Page 24 - Deleted messages cannot be recovered. The delete all
24 Deleting all ICMs To delete all ICMs, during standby, 1. Press for 2 seconds. The answering machine emits 2 short beeps. 2. Press again within 5 seconds to permanently delete all new or old messages or press to cancel deletion. Memo Recording a memo You can record one memo. The maximum recording ...
Page 25 - Message alert; Volume adjustment
25 Call screening Call screening allows you to hear the caller before you pick up the call by turning on the answering machine’s speaker during the recording of incoming messages. To turn on/off call screening, 1. Press during standby. The 7-segment LCD displays On if call screening is activated or ...
Page 29 - OTHER FEATURES; PRESS OK; Shortcut to turn handset ringer on/off
29 OTHER FEATURES Key lock Press and hold during standby to lock the keypad. appears whenever keypad is locked. When the keypad is locked, you can still answer an incoming call by pressing . During the call, the keypad functions as normal. When the call is ended, the keypad will be locked again. To ...
Page 30 - MULTI-HANDSET OPERATION; Answering an internal call; When you receive an intercom call, your handset will ring with; Making an internal call; turns on and you’ll hear an internal dialling tone.; Inquiry call
30 bring the handset back in range with the base. Failing to do so will result in the call being disconnected. When the handset is too far away from the base during standby, you will see flashing. MULTI-HANDSET OPERATION You are offered with these additional features if you have 2 or more handsets r...
Page 31 - DEFAULT SETTING
31 3. After the other handset has answered, you can press repeatedly to switch between the external line and the intercom. If the other handset does not answer, press again to cancel the attempt and return to the external line. Call transfer While you are in an inquiry call with the other handset, p...
Page 32 - TROUBLESHOOTING; Problems Solutions; Move the handset closer to the base unit.
32 TROUBLESHOOTING Are you having trouble with your phone? Here are some of the most common problems and solutions. Problems Solutions The phone does not work at all • Make sure that adapter and phone cord are connected properly. • Check that the batteries are fully charged and installed properly. •...
Page 33 - NOTES FOR OPERATION IN NEW ZEALAND; Caller ID
33 Unable to perform remote operation. • Make sure you entered the correct security code. • Use a touch-tone phone. The 7-segment LCD blinks FU . • Memory is full. Delete some old messages to make room for new ones. NOTES FOR OPERATION IN NEW ZEALAND The grant of a Telepermit for any item of termina...
Page 34 - WARRANTY INFORMATION
34 This telephone is not designed for making emergency telephone calls when the power fails. Make alternative arrangements for access to emergency services. WARRANTY INFORMATION This product is covered by a 12 month warranty against defective workmanship or parts. The warranty does not extend to dam...
