Page 2 - TABLE OF CONTENTS
TABLE OF CONTENTS WARNINGS AND SAFETY INFORMATION 1 GETTING STARTED 2 BASIC OpERATION 8 CALLER ID OpERATION 11 LNR FuNCTION (LAST NuMBER REDIAL) 13 phONEBOOk 14 CORDLESS hANDSET OpERATION 15 ANSWERING MAChINE OpERATION (ECO700 ONLY) 19 REMOTE OpERATION (ECO700 ONLY) 23 CuSTOMER SuppORT 25 AppENDIx 2...
Page 3 - WARNINGS AND SAFETY INFORMATION; IMPORTANT; CAUTION
1 • The ear piece of the handset may attract small metal objects such as staples and pins. Care should be taken when placing the handset near these items. • This telephone is not designed for making emergency telephone calls when the mains power fails. • Always have a corded phone available to be ab...
Page 4 - Installation and Charger; GETTING STARTED; WARNING
2 Installation and Charger 1. Connect the mains adaptor (supplied) to the socket on the back of the base unit and to the wall mains supply. 2. Connect the telephone cord to the phone socket on the back of the base unit and into the wall phone socket. 3. Inser t 2 rechargeable Ni-MH AAA batteries (in...
Page 5 - Pack contents; Purchasing additional handsets
3 GETTING STARTED Pack contents Depending on the model you have purchased this pack should contain the following items: If any of these are missing, please contact Oricom directly. eco70/700-1 eco70/700-2 Base units 1 1 Cordless handsets 1 2 Charging cradle and power adaptor 0 1 Power adaptors 1 1 L...
Page 6 - Your cordless handset
4 GETTING STARTED Your cordless handset 1 LCD Display2 Talk3 Left / Recall / Dial mode4 Handsfree5 Phonebook6 Right / CID (Caller ID)7 Intercom8 Delete / Mute9 Numeric keys10 * / Ringer Off (On)11 Ringer Melody / Ringer Volume / Receiver Volume12 # / Keypad lock13 LNR (Last Number Redial) / Pause /L...
Page 9 - Understanding the cordless handset display
7 GETTING STARTED Understanding the cordless handset display Left Arrow / Phonebook records are being reviewed Battery level (3 bars fully charged) Ringer is turned off Speakerphone on Keypad lock Connected to telephone line Flashes when there is an incoming call X appears: microphone muted Caller d...
Page 10 - BASIC OpERATION; During standby; Cordless handset's LCD display; Answering an incoming call; Normal dialling
8 BASIC OpERATION During standby Note: If the power is not connected to the base unit. The cordless handset CANNOT operate. Cordless handset's LCD display HANDSET 1 : Handset number : Current battery level : A c o n s t a n t s i g n a l i c o n i n d i c a t e s t h e cordless handset is linked to ...
Page 11 - Mute feature
9 BASIC OpERATION Mute feature Place a call on hold so that the caller will NOT be able to hear you but you can still hear the caller. During talking mode,1. Press [ ] key on the handset to mute the call, is shown on the display. 2. Press [ ] key again to resume the call. Handset range Your eco70/70...
Page 12 - Recall selection; Handsfree mode
10 BASIC OpERATION Recall selection You can use the Recall button on your telephone when using your network operator's services such as call waiting etc. A subscription may apply for these services. Contact your network operator for more information. If this is not working correctly, change the sett...
Page 13 - CALLER ID OpERATION; Take two different calls at the same time; Review Caller ID records
11 CALLER ID OpERATION If you subscr ibe to your telephone operators ser vice (charges may apply), numbers of the incoming calls will be displayed on the screen and stored in the call log (please consult your telephone service provider for details). The eco70/700 series can store the last 20 calls i...
Page 14 - Store a CID number; Calling a number from the CID records
12 CALLER ID OpERATION Store a CID number You can save a CID record into the Phonebook/Direct memory provided that it contains a valid phone number and the Phonebook/Direct memory is not full. While you are viewing the CID record that you wish to save, 1. Press and hold [ ] key for about 2 seconds. ...
Page 15 - Redial the last number; Store the last number dialled; Delete last number dialled
13 LNR FuNCTION (LAST NuMBER REDIAL) Redial the last number Your cordless handset stores the last 3 external numbers dialled, up to 24 digits per number. If the number exceeds 24 digits, the last 24 digits will be stored to memory.During standby mode,1. Press [ ] key. 2. When necessary, press [ ] ke...
Page 16 - phONEBOOk; Add new records
14 phONEBOOk Add new records You can store up to 10 phonebook records in each handset. Each record can contain up to 24 digits per number.During standby mode,1. Press and hold [ ] key until the icon appears on the display. 2. Press the numeric keys to enter the telephone number. If you made a mistak...
Page 17 - CORDLESS hANDSET OpERATION; Voicemail indication – network service; Clearing the Voicemail indicator; Handset ringer adjustment; Handset ringer melody; Handset ringer volume; Handset ringer On / Off
15 CORDLESS hANDSET OpERATION Voicemail indication – network service Voicemail indication is a visual voicemail aler t. On this phone, you will see an envelope icon when there is a voicemail waiting in your service providers mailbox. Retrieving Voicemail(s) To retrieve your voicemail(s), consult you...
Page 18 - Multi-handset Operation; Call transfer between cordless handsets; Conference calls; Cordless handset keypad lock
16 CORDLESS hANDSET OpERATION Multi-handset Operation Your eco70/700 series phone can have up to 5 handsets registered to the base unit. Each handset has its own number HS-1, HS-2, HS-3, HS-4 and HS-5, shown on the left-hand side of the display. With 2 or more handsets you can:• Make intercom calls ...
Page 19 - Registration; Register new handsets on the eco70/700 base; Remove handsets
17 CORDLESS hANDSET OpERATION Note: When the keypad is locked, [ ] key and [ INT ] key can be used to answer an external or intercom call. Registration Register new handsets on the eco70/700 base The handsets which come in the same pack are already registered to the base. If you buy new handsets. Yo...
Page 20 - ANSWERING MAChINE OpERATION (ECO700 ONLY); LED Display; Recording outgoing messages (OGM 1 or OGM 2)
18 ANSWERING MAChINE OpERATION (ECO700 ONLY) The base has a built-in digital answering machine with a recording capacity of 11 min. The answering machine can be operated remotely and features the possibility of recording two outgoing messages (OGM 1 and OGM 2) (maximum of 2 min). There are 2 possibi...
Page 21 - Erasing the Outgoing Message; Turning Answering Machine On/Off; Setting number of Rings
19 ANSWERING MAChINE OpERATION (ECO700 ONLY) Erasing the Outgoing Message Erase the outgoing message as follows: • Select the desired outgoing message by pressing and hold the [ ] key. • Press the [ ] key to play the outgoing message. • Keep pressing the [ ] key when the OGM is played back. Turning ...
Page 22 - Checking number of Rings; Changing the VIP Code; Checking the VIP Code
20 Note: • If you do not press any keys for 3 seconds, the machine will revert back to the answering machine menu, without changing the settings. Checking number of Rings • Press the [ ] key briefly. • The display will show the number of rings set. Programming the VIP Code The VIP code is a 3-digit ...
Page 24 - Erasing Messages; Erasing Messages One at a Time during Playback; Memory Full
22 ANSWERING MAChINE OpERATION (ECO700 ONLY) – go to the previous message by pressing the [ ] key twice. – stop playback by pressing the Stop [ ] key. – interrupt playback by pressing the Pause key [ ] . Press the play [ ] key again to restart playback. – go to the next message by pressing the [ ] k...
Page 26 - Turning answering machine on remotely
24 REMOTE OpERATION (ECO700 ONLY) Turning answering machine on remotely If the answering machine is switched off, you can turn it on remotely. • Call your machine.• The machine will pick up automatically after 16 rings and play outgoing message 2. • After the beep tone dial the VIP code (default 321...
Page 27 - CuSTOMER SuppORT
25 If you feel this product is not working correctly please consult the user guide and ensure that you are using the product in accordance with the instructions. Remove all extra telephone equipment and connect only this telephone directly to the telephone socket. If the fault is still present, conn...
Page 28 - Troubleshooting; AppENDIx
26 Troubleshooting Problem Possible cause(s) Solution(s) No dial tone on the cordless handset. 1. The base unit is not properly connected. 2. Too far from the base unit. 3. Battery charge is low.4. Incorrect battery polarity.5. Re-register handset. 1. Check CONNECTION to power and telephone line.2. ...
Page 31 - Product Specifications
29 AppENDIx Product Specifications Phone – Oricom eco70/700 Specifications Frequency range 1.88-1.897 GHz (bandwidth=20MHz) Channel bandwidth 1.728 MH Operating range Up to 300m outdoors, up to 50m indoors Standby time Up to 100 hours Talk time Up to 10 hours Temperature time Operating 0 º C to 40 º...
Page 33 - Notes for operation in New Zealand
31 AppENDIx No change to the conditions of this Warranty is valid unless it is made in writing and signed by an authorised representative of Oricom. Oricom is not liable for any damages caused by the product or the failure of the product to perform, including any lost profits or savings or special, ...
Page 34 - Caller ID
32 AppENDIx REN (RN for New Zealand) The REN (Ringer Equivalence Number) or (RN) is of significance only if you wish to connect more than 1 telephone to your telephone line. A standard telephone line has a maximum REN capacity of 3 (RN of 5). It is possible to connect 3 (5) devices with a REN of 1 (...
Page 36 - Australia; Customer Support
Australia Oricom International Pty Ltd Locked Bag 658 South Windsor, NSW 2756 Customer Support Email: [email protected] Web: www.oricom.com.au Phone: (02) 4574 8888 Fax: (02) 4574 8898
