Oricom ECO7100-1 - Manuals - manualsarea.com

Page 2 - TABLE OF CONTENTS

TABLE OF CONTENTS SAFETY INFORMATION 1 GETTING STARTEd 3 CORdLESS HANdSET LAYOUT 5 CORdLESS HANdSET LCd dISpLAY 7 CORdEd BASE kEY LAYOUT 9 CORdEd BASE LCd LAYOUT 11 CORdLESS HANdSET OpERATIONS 15 USING YOUR pHONEBOOk 17 USING THE CALL LOG 20 USING THE REdIAL LIST 21 SET CLOCk & ALARM 23 AdvANCEd...

Page 3 - IMPORTANT

1 TABLE OF CONTENTS • Clean with a dry, soft, lint-free cloth. Never use cleaning agents, particularly aggressive solvents. • Because the phone works by sending radio s i g n a l s b e t w e e n b a s e s t a t i o n a n d h a n d s e t , w e a r e r s o f h e a r i n g a i d s m a y e x p e r i e n...

Page 4 - CAUTION; SAFETY INFORMATION

2 • Do not use your telephone during an electrical storm or thunderstorm as it is possible to get an electric shock. Refer to information contained in White pages directory. • This phone is designed for connection to a PSTN telephone line or an analogue extension port of a PBX system. If you connect...

Page 5 - Read first before getting started

3 Read first before getting started Location The base unit needs to be placed within 2 metres of the mains power socket and telephone socket so that the cables can reach.The base unit should not be placed too close to other electrical equipment for avoidi interference.Avoid exposure of the phone to ...

Page 6 - Packing contents; GETTING STARTEd

4 In a home with broadband, every telephone must have a micro-filter connected, not just the one at the telephone point that your modem is connected to. If you need more broadband micro-filters, contact your broadband supplier. Packing contents The following items should be contained in the pack: • ...

Page 7 - Cordless Handset layout

5 Cordless Handset layout 1 Earpiece2 OK button - Select a menu entry 3 NAVIGATION button - Up to increase volume and view CID - D o w n t o d e c r e a s e v o l u m e a n d a c c e s s Phonebook 4 TALK button - Make or Accept a call 5 Menu button - Access to main menu 6 [*] button - Long press to ...

Page 8 - pACk CONTENTS; CORdLESS HANdSET LAYOUT

pACk CONTENTS 6 11 Redial button - Enter redial list to view the last dialed number 12 R (Recall) button13 [#] button - Insert a pause. - Long press to turn the ringer on/off 14 INT button - Make the intercom call - Make the conference call 15 Microphone CORdLESS HANdSET LAYOUT

Page 9 - Cordless Handset LCD display

pACk CONTENTS 7 1 Display icons2 Displays during the MENU mode to confirm the selection 3 Indicates more options available Use Up/Down key to scroll up/down Cordless Handset LCD display 4 Display during the MENU mode Press BACK to return to the pervious menu level. Press BACK to delete the last ente...

Page 10 - Icon Definition; Icon; CORdLESS HANdSET LCd dISpLAY

8 Icon Definition Icon Name Description Battery Level Indication Indicates the battery charge level Call Indicates that an external call is connected or held. Icon blinks when receiving an incoming call. Message Indicates you have a new Voice Mail message. Caller display Indicates you have new misse...

Page 11 - Corded base key layout

9 Corded base key layout CORdLESS HANdSET LCd dISpLAY CORdEd BASE kEY LAYOUT

Page 12 - CORdEd BASE kEY LAYOUT

10 1 Hook lock - fix the corded handset on the corded base while the corded base is hung against the wall 2 Speaker3 BACK button - Press to return to Standy mode 4 OK/ CLOCK button - Press to confirm all settings - Long press to set date and time 5 Key lock / * button - Long press to activate or dea...

Page 14 - Icons Definition; CORdEd BASE LCd LAYOUT

12 Icons Definition Icon Name Description Mute Indicates the mic is turned off Call Indicates that an external call is connected or held. Icon blinks when receiving an incoming call. Message Indicates you have a new Voice Mail message. Caller display Indicates you have new missed calls, or the call ...

Page 15 - OR

13 #88 Recorded number in Phonebook or CID list Indicates the recorded number for Phonebook or CID entry  Digits on the right Displays when there is more digit(s) available on the right for displaying  Digits on the left Displays when there is more digit(s) available on the left for displaying 88:...

Page 16 - Main Menu; Menu Tree; COREdE BASE LCd LAYOUT

14 Main Menu Sub-menu 1 PHONEBOOK NEW ENTRYLISTEDIT ENTRYDELETEDELETE ALLDIRECT MEM PERSONAL SET HANDSET NAMEHANDSET TONELANGUAGEAUTO HANG-UP CLOCK & ALARM DATE/ TIMESET FORMATALARMALARM TONE ADVANCED SET CHANGE PINREGISTRATIONUNREGISTERRESETAUTO PREFIXRECALL TIMEFIRST RING ANSW MACHINE PLAYDELE...

Page 17 - Cordless Handset Operations; You can also call from Call log/Redial

15 Cordless Handset Operations Switching ON/ OFF Press and hold the END button for more than 2 seconds to switch on/off the handset in standby mode. You can switch the handset off to save battery charge. Note: The handset cannot be used for Emergency calls when switched off. Also, it won’t ring duri...

Page 18 - CORdLESS HANdSET OpERATIONS

16 CORdLESS HANdSET OpERATIONS Volume control D u r i n g a c a l l , y o u c a n i n c r e a s e / d e c r e a s e t h e earpiece volume by pressing Navigation up/down button Mute The Mute function allows you to turn off the microphone during a call, so that the caller can’t hear you. But, it won’t...

Page 19 - Using your Phonebook

17 USING YOUR pHONEBOOk CORdLESS HANdSET OpERATIONS Using your Phonebook You can store up to 30 phonebook memories with a maximum of 24 digits for the phone number and 12 characters for name for each entry.The stored entries will be listed in alphabetic order. Add an entry into Phonebook 1. Press ME...

Page 20 - USING YOUR pHONEBOOk

18 USING YOUR pHONEBOOk Note: You can erase the entered content by pressing BACK button if you make an error.. Delete a Phonebook entry 1. Press MENU button and select PHONEBOOK by using Navigation Up/Down button, press OK button to confirm 2. Press Up/Down button to select DELETE and then press OK ...

Page 22 - USING THE CALL LOG; Using the call log

20 USING THE CALL LOG Using the call log Caller ID enables you to see the your callers’ phone number on the handset display before you answer and also in your Call Log afterwards, but you have to subscribe to the Caller ID service first. Check with your telephone network service provider for more de...

Page 23 - Using the Redial list; Change your handset tone

21 USING THE CALL LOG USING THE REdIAL LIST Using the Redial list The last 5 dialed numbers will be stored in the Redial list. View the Redial list Press Redial button in standby mode and browse the redial list by using Up/Down button Save an entry into Phonebook from Redial list 1. Press Redial but...

Page 24 - USING THE REdIAL LIST

22 USING THE REdIAL LIST 4. Press Up/Down button to select RING VOLUME and press OK button to confirm 5. Press Up/Down button to select your desired volume and then press OK button to confirm Set the ring melody There are 10 melodies available on your handset.1. Press MENU button in standby mode 2. ...

Page 27 - AdvANCEd USE OF YOUR TELEpHONE; Advanced use of your telephone

25 AdvANCEd USE OF YOUR TELEpHONE SET CLOCk & ALARM 2. Press MENU button on the handset in standby mode 3. Press Up/Down button to select ADVANCED SET and press OK button to confirm 4. Press Up/Down button to select REGISTRATION and press OK button to confirm 5. E n t e r t h e P I N c o d e a n...

Page 30 - ANSWERING SYSTEM; Answering system

28 ANSWERING SYSTEM Answering system Turn On/ off the answering system 1. Press MENU button in standby mode 2. Press Up/Down button to select ANSW MACHINE and press OK button to confirm 3. Press Up/Down button to select ANSW. ON/OFF and press OK button to confirm 4. Press Up/Down button to select ON...

Page 33 - Corded Base Operations; Set Date and Time

31 ANSWERING SYSTEM CORdEd BASE OpERATIONS Corded Base Operations Set Date and Time Press and hold OK/CLK button, the LCD will be displayed: - - : - - AM - - D/ - - M Select AM/PM Key in the time and date, you can erase the entered content by pressing Mute/C/Delete button if you made an error.P r e ...

Page 35 - HANdSET TONE

33 Press OK/CLK button to confirm. A confirmation tone will be emitted and the base will return to standby mode. Edit a Phonebook entry Press Phonebook button in standby mode and select an entry by pressing CID up/down button Press and hold Phonebook button again till the Phonebook icon is displayed...

Page 36 - CORdEd BASE OpERATIONS

34 A confirmation tone will be emitted and the base will return to Standby mode. Delete a CID record Press CID up/down button in standby mode to select an entry Press Mute/C/Delete button and the LCD will be displayed: Press OK/CLK button to confirm. A confirmation tone will be emitted and the base ...

Page 38 - Answering system on the base; Turn on/off the answering system; Delete all recorded messages; ANSWERING SYSTEM ON THE BASE

36 Press Play/Stop button in standby mode Press and hold Mute/C/Delete button for about 5 seconds to delete all the recorded messages. A confirmation tone will be emitted and the base will return to standby mode. Record your MEMO Press and hold MEMO button in standby mode and the LCD will display: ...

Page 39 - CUSTOMER SUppORT; Customer Support

37 CUSTOMER SUppORT Customer Support If you have any problems setting up or using this product you will find useful tips and information in the Troubleshooting section of this user guide as well as “Frequently Asked Questions” on our website www.oricom.com.au.If you have further questions about usin...

Page 40 - Important Information; WARRANTY

How to make a claim under Warranty in Australia Oricom has a simple warranty process for you to follow: • Please call or email our Customer Support Team, contact details follow. • A Customer Support Team member will verify after troubleshooting with you if your product qualifies under warranty. If s...