Oricom M2400 - Manual

Predialing Pre-dial allows you to enter a telephone number and verify it on the screen before you place the call. The screen displays the last 12 digits dialed but you can enter up to 20 digits. 1. Enter the phone number. 2. To enter a pause, press and hold . A pause is displayed as “P”. 3. When you...

Call Waiting Caller ID If you have subscribed your telephone network operators Call Waiting Caller ID service, your phone will display the number of the other incoming call for around 7 seconds while you are talking on the phone. • While the handset is on an external call, a series of short beeps is...

1. Press and hold DEL until you are prompted to confirm the action. 2. Press OK . The call log is now empty. DIALED NUMBERS Viewing the redial list Your phone stores the last 5 external numbers dialed, up to 20 digits each. 1. Press during standby. The last number dialed, if any, is displayed. 2. Pr...

3. Press OK to select the record and edit the name. 4. Press OK to confirm name change and edit the number. 5. Press OK to confirm number change. Repeat steps 1 to 5 to edit another record. Deleting a phonebook record 1. In phonebook menu, press and to select DELETE and press OK . 2. Press and to se...

If when you are using network services or a PBX the button does not work you can select a different setting. 1. In Settings menu, select RECALL and press OK . The current duration will be displayed. 2. Select RECALL 1 or RECALL 2 and press OK to confirm. Register Each handset can be registered to on...

ANSWERING MACHINE Display The following table describes what the display symbols mean. Display Meaning CL The clock is not set yet. FU Memory is full. No new messages can be recorded. A AM P PM d1 Monday d2 Tuesday d3 Wednesday d4 Thursday d5 Friday d6 Saturday d7 Sunday -A The answer machine is bei...

Recording your Greeting (OGM) The maximum recording time for your Greeting (OGM) is 40 seconds. Once you record a new OGM, the old one will be overwritten. To record your own Greeting (OGM): 1. Press and hold GREETING for 2 seconds. Follow the voice instruction to record your OGM. OG will flash duri...

If a user on a parallel phone picks up while the OGM is playing, pressing # will stop the playback. 1. Press If a user on a parallel phone or the cordless handset picks up during recoding of the callers message the recording will stop. The number of unheard message numbers will be blinking on the di...

When Toll saver is selected, the answering machine will ring four times if no messages are recorded or two times if there is a new message. To review the current ringer delay setting, 1. Press RING during standby. To change the ringer delay setting, 1. Press and hold RING for 2 seconds follow voice ...

While playing the message, To play previous message, press 1, To repeat current message, press 2, To play next message, press 3, To delete current message, press 0, To listen to the options again, press #. Security PIN A three-digit PIN is required for remote access. Note: This is different from the...

Paging the handsets You can page or locate the handsets by pressing on the base. All handsets registered to the base will produce the paging tone for 30 seconds and the screen displays blinking “oooo”. You could stop the paging by pressing any key on each handset or pressing on the base again. Out o...

PIN for registration & deregistration: 0000 Answer machine: On Base audio volume: 4 Call screening: On Message alert: On Greeting (OGM): Default ICM/Memo: Empty Time: Monday midnight Ring Delay: Time saver Security PIN for Answering System remote access: 000 * Settings not listed here are not af...

WARRANTY INFORMATION This product is covered by a 12 month warranty against defective workmanship or parts. The warranty does not extend to damage caused by misuse, negligence, excessive voltage, faults on the telephone line or lightning. This guarantee in no way affects your statutory rights. Full ...