Oricom SLIM-9000 - Manual

4 GettinG started Important • Avoid exposure of this telephone to moisture or liquid.• To prevent electric shock, do not open the handset or base cabinet.• Avoid metallic contact (e.g. metal clips, keys) between the battery contacts and charging conductors. • There is a slight chance that the teleph...

5 GettinG started Location You need to place your Slim base within 2 metres of the mains power socket and telephone socket so that the cables will reach.Make sure it is at least 1 metre away from other electrical appliances to avoid interference. Your unit works by sending radio signals between the ...

6 GettinG started Battery performance In ideal conditions, fully charged batteries should give about 10 hours talk time or 100 hours standby time on a single charge.Note that new batteries do not reach full capacity until they have been in normal use for several days.The charge capacity of rechargea...

7 GettinG started Pack contents Depending on the model you have purchased this pack should contain the following items:If any of these are missing, please contact Oricom directly. Base units 1 Cordless handsets 2 Charging cradle and power adaptor 2 Power adaptors 1 Line cord 1 User guide 1 Handset R...

8 GettinG to know your phone 1 3 2 4 1 7 8 9 10 1 2 5 6 1 1 3 Handset Overview

10 10 DOWN / REDIAL LIST In idle mode: Press to access the redial listIn menu mode: Press to scroll down the menu listIn Phonebook list / Redial list / Call List: Press to scroll down the listDuring a call: Press to decrease the volume 11 INTERCOM In idle mode: Press to make internal callDuring an e...

11 GettinG to know your phone Handset LCD Display Following icons will be displayed according to the current status of the phone operation. Icons Description Steady when the handset is in range of the base. More bars will show when the signal strength is strong. Flashes when the handset is searching...

12 usinG the phone Using the phone Power on the Handset If your handset is powered off before, press and hold <TALK OFF> to turn on the handset.You can press and hold <TALK OFF> again to power off the handset. Make an External Call Preparatory dialling Enter the phone number and press &l...

13 usinG the phone End a Call During a call , press <TALK OFF> to end the call.ORPut the handset on the base station or charger pod to end the call. Adjust Earpiece and Handsfree Volume 5 volume levels (Level 1 to Level 5) can be set for each of earpieceand handsfree volume.During a call:Press...

14 usinG the phone Delete a redial number 1. Follow steps 1 and 2 section “Save a redial number into the phonebook”. 2. Press <Menu> and <UP/DOWN> to scroll to Delete . 3. Press <SELECT> and then <OK> to confirm the Delete. Delete the entire redial list 1. Follow steps 1 and ...

16 phonebook Phonebook Your phone can store up to 100 private phonebook entries with names and numbers. Each phonebook entry can have a maximum of 24 digits for the phone number and 12 characters for the name. Add a New Entry In idle mode:1. Press <Menu> and <UP/DOWN> to scroll to Phoneb...

17 phonebook OR1. Press <Menu> and <UP/DOWN> to scroll to Phonebook.2. Press <Select> to access the phonebook menu.3. Press <UP/DOWN> and <Select> to select View . 4. Press <UP/DOWN> to highlight your desired phonebook entry.5. Press <Select> to view the det...

18 phonebook 5. The receiving handset will beep and prompt to ask whether to accept the phonebook transfer from the sending handset. 6. Press <OK> to start the phonebook transferring process.7. When the transfer is completed, “ Finished ” will be displayed on both sending and receiving handset...

19 Caller LIST This feature is available if you have subscribed to the Caller ID service with your network service provider. Your phone can store up to 30 answered calls or unanswered with date/time information in the call list.The number will be shown on the display when the phone is ringing.If the...

20 Delete an Entry in the Call List 1. Follow steps 1 to 3 in Section “View the Call List”.2. Press <Menu> and <UP/DOWN> to scroll to Delete . 3. Press <Select> to confirm.4. Press <OK> to reconfirm. Delete the Entire Call List 1. Follow steps 1 to 3 in Section “View the Call...

22 Alarm You can use the handset as an alarm clock. When an alarm is set, the <ALARM Icon> is shown on the handset display. When the alarm time is reached, the <ALARM icon> and “ Alarm On ” flash on the display, and the alarm melody is played for 45 seconds or until a any handset key is ...

23 Settings Your phone comes with a selection of settings that you can change to personalise your phone operation. Handset Settings Set the internal ringer melody In Idle mode:1. Press <MENU> and <UP/DOWN> to sc roll to HS Settings . 2. Press <Select> and <UP/DOWN> to scroll ...

26 3. Press <Select> and enter the 4-digit system PIN (Default 4-digit system PIN: 0000)4. Press <OK> to confirm the PIN.5. Press <OK> to confirm the handset default. Note If the PIN code is entered correctly and is confirmed to restore the HS settings to default settings, “ Reset ...

27 5. Press <OK> and enter your new 4-digit system PIN.6. Press <OK> and enter your new 4-digit system PIN again. Note If the new PIN entered in Step 6 is not matched with the new system PIN entered in Step 5, “New PIN Invalid” is displayed and you are returned to step 5. 7. Press <OK...

28 ANSWERING MACHINE Your phone includes a telephone answering machine(TAM) that records unanswered calls when it is on. The answering machine can store up to 59 messages within a maximum recording time of approximately 15 minutes. As well as recording incoming messages, you can record memos for oth...

29 answerinG maChine 5. Press <Option> and <UP/DOWN> to scroll to Stop , Next , Previous or Delete . 6. Press <Select> to perform the following functions during message playback. Stop : Stop the current message playback and return to the Answer Machine menu. Next : Skip to play the...

30 Answering Machine Settings You can use the TAM Settings menu through the handset to change the settings of your answering machine. Set the Answer Mode By default, the answer machine is set in Answer & Record mode which allows callers to leave a message. This mode can be changed to Answer Only...

31 Playback the Outgoing Message (OGM) You can playback your own personalised OGM or the pre-set OGM for Answer & Record mode or Answer Only mode. Playback the OGM 1. Press <Menu> and <UP/DOWN> to scroll to Answer Machine . 2. Press <Select> and <UP/DOWN> to scroll to TAM...

34 deFault settinGs Items Default Values External Ring Melody 6 Internal Ring Melody 1 Handset Ring Volume Volume 4 Earpiece Volume Volume 3 Speaker Volume Volume 4 Handset Name Oricom Key Tone On Battery Tone On Out of Range On Ringer on/Off On Con trast (Level 1 to 5) Level 3 Keypad Locked Off Aut...

35 Troubleshooting Problem Possible cause(s) Solution(s) No dial tone on the cordless handset. 1. The base unit is not properly connected.2. Too far from the base unit.3. Battery charge is low.4. Incorrect battery polarity.5. Re-register handset. 1. Check CONNECTION to power and telephone line.2. Mo...

37 appendix Problem Possible cause(s) Solution(s) The battery icon is not scrolling when the handset is placed on the base. 1. Bad battery contact.2. Dirty contact.3. Battery is fully charged 1. Move the handset slightly.2. Clean the battery contact with a dry cloth.3. Its fine to leave on the base ...

41 appendix The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with the minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty. Above a...

Australia Oricom International Pty Ltd Locked Bag 658 South Windsor, NSW 2756 Customer Support Email: [email protected] Web: www.oricom.com.au Phone: 1300 889 785 Fax: (02) 4574 8898 TM Customer Support If you suspect your product is not functioning to specification, before making a warranty cla...