Oricom S6000 - Manual

Getting Started 5 of 42 Contents of Pack Depending on the model you have purchased the pack should contain the following items, and this user guide:- S6000 S6000+1 S6000+2 Base units 1 1 1 Handsets 1 2 3 Charger + power adaptors NIL 1 2 Base power adaptors 1 1 1 Number of phone cord 1 1 1 Handset Ba...

Battery Level Indication The Battery icon is always displayed when the handset is powered on. When charging, the battery icon will be scrolling to indicate that the batteries are being charged. When fully charged, four bars are displayed. The scrolling will stop. When an empty battery icon is displa...

Menu Short-cuts Once the Menu key is pressed from standby, user can press the digit that corresponds to the position of a main menu item to enter that menu directly. User can press 1 for the SMS menu, 2 for the FEATURES menu, 3 for the SOUNDS menu, 4 for the CALL SETTING menu, 5 for the DISPLAY menu...

Using Direct Dialling When the direct dial feature is activated, the prompt, DIRECT DIAL, will be blinking on the first line of the display during standby. Press any key except during standby to dial out the designated number. To activate: • Press . Use to select FEATURES. • Press . Use to select DI...

• Use to select SAVE ENTRY. Press . • The display will show NAME?. • Use the numeric keys & the key to enter the name. • Press to confirm. The redial number will be displayed. • Edit the number by using the numeric keys & the key. • Press to confirm the entry. • If the new entry would have t...

Recall This key is also used for a number of services available from the telephone network such as call waiting, and for use when connected to certain telephone phone systems (PBX’S). Details on how o use this button will be explained by the network service provider. (Refer to Recall Timing Section)...

Page 15 of 42 In the event of misplacing the handset, press the button on the base unit will page all handsets. All handsets on standby will ring for 30 seconds. The icon and the prompt BASE PAGING will be blinking. User can press the page key on the base unit or any key on a handset to stop the pag...

Note: If the handset loses link with the base when is pres SHARED, UNAVAILABLE will be displayed. 18 of 42 sed from ting a Phoneboo Private/Shared Phonebook Dele k Entry in • ess Pr during standby. • Use the to select IVAT r SHARED and press PR E o . • ADD ENTRY of the phonebook are displa and the f...

• The number of new and old records will be displayed. • After two seconds time-out or a function key is pressed, the most displayed first. If the call log is empty, 19 of 42 ve subscribed your telephone network operators Call Waiting Calle pho external call, a series of short beeps is heard announc...

o If you do not 20 of 42 want to replace the record, press to return to name editing mode to edit the name. Deleting a CID Record • Press on a CID while reviewing the call log. • Use to select DELETE. Press . The display will read DELETE?. • • Press to confirm and the selected CID is deleted. If the...

♦ Press . Use to select SETTINGS. ♦ Press . Use to select SUB ADDRESS. ♦ . 22 of 42 Press ♦ The display will read NUMBER? and the previously entered su ddress will be displayed. Edit the sub address number. It can be b b a etween 0 to 9. Press ♦♦ to confirm. Note: Changing sub address can affect the...

23 of 42 • Press after the message is composed. • Use to select SAVE. Press . • The message is saved in Outbox. Exit from Compose Message • Press after the message is composed. • Use to select EXIT. Press . • The message composed will be neglected. Receiving Message SMS messages with up to 160 chara...

25 of 42 When REPLY & DEL is selected, the original message in the k. If th Inbox will be deleted when the reply message is sent out or saved. Saving the Sender’s Number The number of the sender can be saved in the private phoneboo e sender’s CID is absent, this menu will not be available. • Pre...

27 of 42 Note: If Outbox already contains maximum number of messages, OUTBOX FULL will be displayed when is pressed on EDIT. Dele e message in the OUTBOX, ting the Saved Message While viewing th • Press . Use to select DELETE. • Press . DELETE? will be displayed. • Press again. The message is delete...

28 of 42 Text Entry for SMS For text entry for SMS, the followings will be available. The default will be lower case. KEY 1x 2x 3x 4x 5x 6x 7x 8x 9x 10x 11x 1 space 1 € £ $ ¥ 2ABC a b c 2 à ä å Ç 3DEF d e f 3 è é ∆ 4GHI g h i 4 ì Γ 5JKL j k l 5 Λ 6MNO m n o 6 ñ ò ö ø Ω 7PQRS p q r s 7 ß Π Φ Ψ Σ 8TUV...

Operator Services A total of 7 operator services, each up to 10 characters for name and 18 digits for number, can be stored in the handset. There also will be factory-programmed numbers. You can programme services of your choice by using the ADD ENTRY menu. The operator services works like the phone...

Editing Service Number • Press during predial or standby. • The display will read ADD ENTRY and the first entry of the Service list. • Use to scroll through the services or press a digit to search like the phonebook entries. • Press on a service. Use to select EDIT ENTRY. • Press . NAME? and the nam...

• Press . Use to select DISPLAY. • Press . Use to select CALL TIMER. • Press . Use to choose ON or OFF. • Press to confirm. Backlit LCD / Backlit LCD & Keypad The backlight will turn on when: • a key is pressed • there is an incoming call • paging from the base. The backlight will turn off: • 10...

Delete All Records User can delete the records of the private phonebook, shared phonebook, call log, redial list, services number and SMS messages by resetting the respective menu. • Press . Use to select RESET. • Press . Use to select from PRIV PBOOK, SHARED PBOOK, CALL LOG, REDIAL LIST, SERVICES o...

• Press on the handset. The handset will read SEARCH BASE X while it searches for the base unit (where ‘X’ is the number of the base you are registering to). 37 of 42 • Once a connection has been made, the handset name and number will be shown on the display. Base Selection AUTO If the base selectio...