Page 3 - CONTENTS; WARNINGS AND SAFETY INFORMATION ....................................... 4
1 CONTENTS CONTENTS WARNINGS AND SAFETY INFORMATION ………………………………… 4 Getting Started ………………………………………………………………… 5 Pack contents …………………………… 5 Purchasing additional handsets ……… 5 Installation and Charger ……………… 6 Your cordless handset ………………… 7 Understanding the cordless handset display ………………………………… ...
Page 4 - LNR Function (Last Number Redial) ................................................ 22
CONTENTS 2 With base unit ……………………… 18 Dial a CID number …………………… 19 Store a CID number ………………… 19 With cordless handset ……………… 19 With base unit ……………………… 19 Delete one or all CID record(s) …… 20 With cordless handset ……………… 20 With base unit ……………………… 20 Withheld Call ………………………… 21 Message Waiting...
Page 5 - Cordless Handset Operation ......................................................... 33
3 CONTENTS Cordless Handset Operation ………………………………………………… 33 Handset ringer adjustment ………… 33 Handset ringer melody ……………… 33 Handset ringer volume ……………… 33 Handset ringer On / Off …………… 33 Multi-handset Operation …………… 34 Intercom function …………………… 34 Call transfer between cordless handsets ……………...
Page 6 - WARNINGS AND SAFETY INFORMATION; CAUTION
WARNINGS AND SAFETY INFORMATION 4 Avoid exposure of this telephone to moisture or liquid.To prevent electric shock, do not open the handset or base cabinet.Avoid metallic contact (e.g. metal clips, keys) between the battery contacts and charging conductors.There is a slight chance that the telephone...
Page 7 - Pack contents; Getting Started; Purchasing additional handsets
5 GETTING STARTED Pack contents Depending on the model you have purchased this pack should contain the following items: Getting Started If any of these are missing, please contact Oricom directly. Purchasing additional handsets You may expand your M5500 by adding more handsets (M5520TI). These can b...
Page 8 - Installation and Charger
GETTING STARTED 6 Installation and Charger 1 . Connect the mains adaptor to the socket on the back of the base unit and to the wall mains supply. 2 . Connect the telephone cord to the phone socket on the back of the base unit and to the wall phone socket. 3 . Insert 2 rechargeable Ni-MH AAA batterie...
Page 9 - Receiver Volume; Your cordless handset
7 GETTING STARTED 1. Talk 2. Left / Recall 3. Menu 4. Phonebook 5. Right / CID (Caller ID) / Handsfree 6. Intercom 7. Delete / Mute 8. Numeric keys 9. / Ringer Off (On) 10. Ringer Melody / Ringer Volume / Receiver Volume 11. # / Keypad lock 12. LNR (Last Number Redial) / Pause / Long (Short) flash 1 ...
Page 10 - Understanding the cordless handset display
GETTING STARTED 8 Left Arrow / Phonebook records are being reviewed Battery level (3 bars fully charged) Ringer is turned off Speakerphone on Keypad lock Connected to telephone line. Flashes when there is an incoming call X appears: microphone muted Caller display Antenna in range / out of range Int...
Page 11 - Direct memory keys; Speaker volume control
9 GETTING STARTED 1. OK / Menu 2. Down / OGM (ANS) Recording / Play OGM, Repeat Message, Press twice for Skip to previous Message 3. CID (Caller ID) 4. Phonebook 5. Delete 6. Numeric keys & , # keys 7. Up / MEMO Recording MEMO, Skip to next Message 8. Direct memory keys 9. Dial 10. Stop / On/Off...
Page 12 - Understanding the base unit display
GETTING STARTED 10 Ringer off Message waiting Repeat CLIP Play ICM Message Flashes when new messages are received Review CID (caller ID) Flashes when there are new CIDs Message Counter In Phonebook Mode Speakerphone On Flash: Group listening Handset Talking Indicates phone call in progress Microphon...
Page 13 - Basic Operation; During standby; Cordless handset's LCD display; HANDSET 1; Base unit’s LCD display; Answering an incoming call; CANNOT; HANDSET; With cordless handset; Note
11 BASIC OPERATION Basic Operation During standby Cordless handset's LCD display HANDSET 1 : Handset number : Current battery level : Signal icon indicates the cordless handset is linked to the base unit. Base unit’s LCD display CLIP 10-30 : Total 30 calls with 10 new calls A1 : OGM 1 Message15/35 :...
Page 14 - Making an external call; Normal dialling; With base unit
BASIC OPERATION 12 Making an external call Mute feature With base unit During talking mode, 1 . Press key to mute the call, is shown on the display. 2 . Press key again to resume the call. With cordless handset Normal dialling 1 . Press key. 2 . Enter a telephone number. If you enter more than 14 di...
Page 15 - Take two different calls at the same time; Australia; Recall function when connected to a PABX; Recall feature; Call waiting
13 BASIC OPERATION Take two different calls at the same time During a call, you will hear two loud beeps periodically to notify you of another incoming call. If you wish to answer this call, 1 . Press R key. You will hear a dial tone. 2 . Press 2 to put the current call on hold and talk with the sec...
Page 16 - Pause feature when using on a PABX; OUTSIDE LINE DIGIT
BASIC OPERATION 14 Pause feature when using on a PABX Note: The pause function described in this section is only necessary when the M5500 is used on older PABX’s. With some PABX's, there is a short pause between the code for the outside line (usually 0 or 9) and obtaining dial tone. A pause needs to...
Page 17 - Handset volume control; Or
15 BASIC OPERATION Handset volume control During handset talking mode, 1 . Press or key to adjust the handset volume level: Step 1 (lowest) to Step 3 (highest) . 2 . The unit automatically returns to the previous talking mode 2 seconds after pressing the last key. Ringer volume control During incomi...
Page 18 - Direct Memories; How to enter names; OK
BASIC OPERATION 16 Direct Memories There are 3 Direct memory keys on the base unit: M1, M2, and M3, which allow you to store 3 numbers and dial them directly.Each memory can store up to 24 digits per number and up to 16 characters per name. How to enter names The keypad is used to enter names. Selec...
Page 19 - key to edit the memory. For; Key lock
17 BASIC OPERATION Edit / Dial / Delete stored records 1 . Press M1 / M2 / M3 key. 2 . The display on the right is shown. 3 . Press OK key to edit the memory. For operation (Refer to P26) . 4 . Press key to dial out the number. During On-hook, the unit will turn Speakerphone on automatically, and di...
Page 20 - record number; CLIP; Review Caller ID records; Caller ID Operation
CALLER ID OPERATION 18 If you subscribe to your telephone operators service (charges may apply), numbers of the incoming calls will be displayed on the screen and stored in the call log (please consult your telephone service provider for details). The M5500 series can store the last 30 calls includi...
Page 21 - Dial a CID number; CID; Store a CID number; Phonebook/Direct memory
19 CALLER ID OPERATION Dial a CID number While you are viewing the CID record that you wish to call, 1 . Press key. 2 . During On-hook, the unit turns the Speakerphone on automatically, and dials the number after 3 seconds. During Off-hook, it dials immediately. Store a CID number You can save a CID...
Page 22 - Delete one CID record
CALLER ID OPERATION 20 If the Phonebook is full or Direct Memory has been occupied, The display on the right is shown. After 5 seconds, it will return to the previous mode or press key to return to the previous mode. Delete one or all CID record(s) With cordless handset Delete one CID record While y...
Page 23 - Message Waiting; Delete all CID records; Withheld Call; Withheld
21 CALLER ID OPERATION Message Waiting If you have subscribed to the voicemail service from your telephone company, is displayed when you have a new message in your mailbox. If the is displayed, 1 . Call your network service providers to obtain your messages. 2 . After listening to all the new messa...
Page 24 - Redial the last number; key to redial the last number.; key or pick up the handset.
LNR FUNCTION 22 Redial the last number With cordless handset Your cordless handset stores the last 3 external numbers dialled, up to 25 digits per number.If the number exceeds 25 digits, the first 25 digits will be stored to memory. During standby mode, 1 . Press /P key. 2 . When necessary, press /P ...
Page 25 - Delete last number dialled; LNR
23 LNR FUNCTION With cordless handset While you are viewing a previously dialled number that you wish to save, 1 . Press key. The display on the right is shown. 2 . Press the numeric keys to enter the Name. If you made a mistake, press key to edit it. 3 . Press key to complete editing the Name and p...
Page 26 - Phonebook; Add new records; New
PHONEBOOK 24 Phonebook Add new records With cordless handset You can store up to 50 phonebook records in each handset. Each record can contain up to 25 digits per number and 16 characters per name. During standby mode, 1 . Press and hold key. The display on the right is shown. 2 . Press the numeric ...
Page 27 - Review / Edit / Dial stored Phonebook records
25 PHONEBOOK 5 . Press OK key to complete editing the Number and proceed to enter the Name. The first character flashes on the display. 6 . Press the numeric keys to enter the new Name. As mentioned in Step 4, you can perform similar editing by pressing ! / or X key when necessary. 7 . Press OK key to...
Page 29 - Delete one record
27 PHONEBOOK Delete one record With cordless handset While you are viewing the record that you wish to delete, 1 . Press key. A confirmation message “ DELETE? ” is displayed. 2 . Press key to confirm and show the previous record. With base unit While you are viewing the record that you wish to delete,...
Page 30 - Audio settings; Menu Setup
MENU SETUP 28 Audio settings During standby mode, 1 . Press OK key to enter the menu set mode. 2 . Press ! or key to select the item “ Audio ” from the display. 3 . Press OK key to enter Audio setting. The display on the right is shown. 4 . Press ! or key to select the item that you wish to set. The...
Page 31 - Ringer melody setting
MENU SETUP 29 Ringer melody setting During Audio setting mode, 1 . Press ! or key to select “ Ring Tone ” from the display. 2 . Press OK key to enter. “ Ring Tone-1 ” is displayed and the sound of the current tone can be heard. 3 . Press ! or key to select the step. There are 5 steps for adjustment....
Page 32 - Answering mode setting
MENU SETUP 30 Answering mode setting During TAD setting mode, 1 . Press or key to select “ Answering ” from the display. 2 . Press OK key to enter the mode. 3 . Press ! or key to select “ Answering -A1 ” or “ Answering-A2 ” from the display. 4 . Press OK key to confirm the selection and return to the...
Page 33 - (Refer to the operation in “Audio setting” section; PABX settings
MENU SETUP 31 1 . Enter “ PABX setting ” mode (Refer to the operation in “Audio setting” section on P28) . 2 . Press ! or key to select the item that you wish to set. The display is shown in this order: Key PIN Prefix Number Prefix dashes to show that you have reached the end of the menu. 3 . Press OK...
Page 34 - General settings; Contrast setting; Reset
MENU SETUP 32 During menu setting mode, 1 . Press ! or key to select “ Setting ” from the display (Refer to P28) . 2 . Press OK key to enter the mode. 3 . Press ! or key to select the item that you wish to set. The display is shown in this order: Contrast Language Date/Time Reset dashes to show that...
Page 35 - Cordless Handset Operation; Handset ringer melody; appears whenever the ringer is Off.; Handset ringer adjustment; MELODY 3
33 CORDLESS HANDSET OPERATION Cordless Handset Operation Handset ringer melody During standby mode, 1 . Press and hold key. flashes and the current melody option appears. 2 . Press ! or key to select the melody option (1 to 9 for adjustment) . 3 . Press key to confirm. Handset ringer volume During sta...
Page 36 - Multi-handset Operation; • You can make an intercom call when the other handset in progress.; Intercom function; INT
CORDLESS HANDSET OPERATION 34 Multi-handset Operation Your M5500 series phone can have up to 4 handsets registered to the base unit. Each handset has its own number HS-1, HS-2, HS-3 and HS-4 shown on the left-hand side of the display. With 2 or more handsets you can: • Make intercom calls while on a...
Page 37 - Call transfer between cordless handsets
35 CORDLESS HANDSET OPERATION Call transfer between cordless handsets When there is an incoming external call, 1 . Press INT key. The display on the right is shown. 2 . Key the handset number (1, 2, 3, or 4) you wish to transfer. 3 . Press key to exit Intercom mode and return to standby mode. Transf...
Page 38 - Cordless handset keypad lock; Registration; Register new handsets on the M5500 base; REGISTER
CORDLESS HANDSET OPERATION 36 Cordless handset keypad lock During standby mode, 1 . Press and hold # key to lock the keypad. 2 . To release keypad lock, press and hold # key for 3 seconds. Note : When the keypad is lock, key and INT key can be used to answer an external or intercom call. Registratio...
Page 39 - Remove handsets; REMOVE HS; Language setting; LANGUAGE
37 CORDLESS HANDSET OPERATION Remove handsets During standby mode, 1 . Press key. 2 . Press or key to select “ REMOVE HS ” from the display. 3 . Press key to confirm. The display on the right is shown. 4 . Enter the default value 0000. 5 . Press key to confirm and the display on the right is shown. 6 ...
Page 40 - RESET; Handset name; NAME
CORDLESS HANDSET OPERATION 38 Reset During standby mode, 1 . Press key. 2 . Press or key to select “ RESET ” from the display. 3 . Press key to enter the mode. The display on the right is shown. 4 . Press the numeric keys to enter the PIN. 5 . Press key to confirm. Handset name During standby mode, 1...
Page 41 - Answering machine On / Off; Answering off; OGM setting; Answering Machine Operation
39 ANSWERING MACHINE OPERATION Answering machine On / Off During standby mode, 1 . Press and hold key to switch the answering machine off. The voice prompt, “ Answering off ” can be heard followed by two short beeps. Note: During Off mode, the answering machine is set to Announcement Two mode automa...
Page 42 - Record OGM
ANSWERING MACHINE OPERATION 40 Record OGM 1 . Press key to select OGM1 mode or OGM2 mode. 2 . Press and hold /ANS key until you hear a long beep and see Answer/Message light flash. The display on the right is shown. 3 . Speak into the microphone (15cm from the base unit’s microphone). 4 . Press key t...
Page 43 - Record ICM
41 ANSWERING MACHINE OPERATION ICM (Incoming Messages) Record ICM During OGM 1 mode, the machine can record callers’ messages. During recording mode, the display on the right is shown. The machine will stop recording 6 seconds after the caller hang up the phone, or stop automatically after recording...
Page 44 - Memo; Record memo; MEMO; Play memo; Play; Delete messages; Delete one message
ANSWERING MACHINE OPERATION 42 Memo Record memo You can record memos for other users of the unit to hear. The maximum recording time is 2 minutes. During standby mode, 1 . Press and hold MEMO key until you hear a long beep. The display on the right is shown. 2 . Speak into the microphone after the b...
Page 45 - Delete all messages; Memory full; Answering Machine Full; Remember to delete messages!
43 ANSWERING MACHINE OPERATION Delete all messages While you are listening to a message, 1 . Press and hold X key. The display on the right is shown. 2 . Press OK key to confirm and you will hear “ All message deleted ”. 3 . Press key to cancel the action. Memory full Memory will be full in the follo...
Page 46 - Remote control; Advanced Answering System; Access the answering machine remotely
ADVANCED ANSWERING SYSTEM 44 Remote control You can access your answering machine when you are away by using any touch tone phone. You have to enter the Security PIN to access the answering machine. The default PIN is 321 (Refer to “TAD PIN setting” on P30) . Advanced Answering System Access the ans...
Page 47 - Call screening; (refer to “call screening mode; Toll saver; times; Cordless handset detection
45 ADVANCED ANSWERING SYSTEM Call screening Call screening function allows you to hear the caller (who it is) before you pick up the call during recording incoming messages. To activate call screening, operate in Menu setting (refer to “call screening mode setting” section on P30). Toll saver Toll s...
Page 48 - Troubleshooting; Appendix
APPENDIX 46 Problem Possible cause(s) Solution(s) No dial tone on the cordless handset. 1. The base unit is not properly connected.2. Too far from the base unit.3. Battery charge is low.4. Incorrect battery polarity. 1. Check CONNECTION to power and telephone line.2. Move handset CLOSER to base unit...
Page 49 - Product Specifications
47 APPENDIX Phone – Oricom M5500 Specifications Frequency range 1.88-1.897 GHz ˄ bandwidth=20MHz ˅ Channel bandwidth 1.728 MH Operating range Up to 300m outdoors, up to 50m indoors Standby time Up to 100 hours Talk time Up to 11 hours Temperature time Operating 0 ć to 40 ć Storage -20 ć to 60 ć Compa...
Page 50 - Notes for Operation in NEW ZEALAND
APPENDIX 48 Notes for Operation in NEW ZEALAND The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with the minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it pr...
Page 51 - Warranty Information; Exclusion and limitation of liability.; negligence on your part or misuse by you of the product
49 APPENDIX Warranty Information (a) Warranty. Oricom warrants that the product is free from defects in materials and workmanship for a period of 12 months effective from the date of purchase. This warranty in no way affects your statutory warranty under the Trade Practices Act 1974 or any other sim...
Page 52 - Customer Support Australia; Oricom International Pty Ltd; Postal Address; Customer Support; Customer Support New Zealand; To view the full Oricom range, please visit the Oricom website:
Customer Support Australia Email: [email protected] Web: www.oricom.com.au Fax: (02) 4574 8888 Ph: 1300 889 785 Oricom International Pty Ltd Locked Bag 658, South Windsor NSW 2756, Australia Postal Address Customer Support Customer Support New Zealand Email: [email protected] Web: www.a...
