Page 2 - CONTENTS; WARNINGS AND SAFETY INFORMATION ....................................... 1
CONTENTS CONTENTS WARNINGS AND SAFETY INFORMATION ………………………………… 1 Important ……………………………… 1 Getting Started ………………………………………………………………… 2 Installation and Charger Installation and Charger ……………… ……………… 2 2 Warning ………………………………… 3 Pack contents Pack contents …………………………… …………………………… 4 4 Purchasing additi...
Page 3 - LNR Function (Last Number Redial) ................................................ 16
CONTENTS LNR Function (Last Number Redial) ………………………………………… 16 Redial the last number Redial the last number ……………… ……………… 1 16 6 Store the last number dialled Store the last number dialled ……… ……… 17 17 Delete last number dialled Delete last number dialled ………… ………… 17 17 Phonebook …………………………………………...
Page 4 - Answering Machine Operation ...................................................... 26
CONTENTS Answering Machine Operation ……………………………………………… 26 Answering machine On / Off Answering machine On / Off ……… ……… 2 26 6 Day/Time setting Day/Time setting ……………………… ……………………… 2 26 6 Answering machine Ring delay Setting Answering machine Ring delay Setting 2 27 7 Answering machine PIN number S...
Page 5 - WARNINGS AND SAFETY INFORMATION; CAUTION
WARNINGS AND SAFETY INFORMATION 1 WARNINGS AND SAFETY INFORMATION CAUTION Avoid exposure of this telephone to moisture or liquid. To prevent electric shock, do not open the handset or base cabinet. Do not use the handset in an explosive hazard area such as where there is gas leaking. Do not use your...
Page 6 - Getting Started; Installation and Charger
2 GETTING STARTED Getting Started Installation and Charger Installation and Charger 1 . Connect the mains adaptor (supplied) to the socket on the back of the base unit and to the wall mains supply. 2 . Connect the telephone cord to the phone socket on the back of the base unit and into the wall phon...
Page 7 - WARNING; Never use alkaline or lithium batteries.
GETTING STARTED 3 WARNING RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.Never use non-rechargeable batteries. Use recommended type supplied with this product. Never use alkaline or lithium batteries. Do not dispose of the batteries in a fi re, as they can explode. Do not open or muti...
Page 8 - Pack contents
4 GETTING STARTED Pack contents Pack contents Depending on the model you have purchased this pack should contain the following items: If any of these are missing, please contact Oricom directly. eco5200-1 eco5200-2 eco5200-3 Base units 1 1 1 Cordless handsets 1 2 3 Charging cradle and power adaptor ...
Page 9 - Your cordless handset
5 1. Talk 2. Left / Recall 3. Menu 4. Phonebook 5. Right / CID (Caller ID) / Handsfree 6. Intercom 7. Delete / Mute 8. Numeric keys 9. / Ringer Off (On) 10. Ringer Melody / Ringer Volume / Receiver Volume 11. # / Keypad lock 12. LNR (Last Number Redial) / Pause / Long (Short) fl ash 1 5 2 4 3 67 8 9...
Page 10 - Understanding the cordless handset display
6 Left Arrow / Phonebook records are being reviewed Battery level (3 bars fully charged) Ringer is turned off Speakerphone on Keypad lock Connected to telephone line. Flashes when there is an incoming call X appears: microphone muted Caller display Antenna in range / out of range Intercom call to an...
Page 12 - Bottom
8 GETTING STARTED 2-9/GS (Answering Machine Rings) Bottom Bottom CODE (Answering Machine PIN)
Page 13 - Basic Operation; During standby; Cordless handset's LCD display; Answering an incoming call; With cordless handset; HANDSET; CANNOT; With base unit
BASIC OPERATION 9 Basic Operation During standby During standby Cordless handset's LCD display HANDSET 1 : Handset number : Current battery level : A constant signal icon indicates the cordless handset is linked to the base unit. When signal icon is fl ashing the handset needs to be re-registered (s...
Page 14 - Making an external call; Normal dialling; Mute feature
10 BASIC OPERATION Making an external call Making an external call With cordless handset Normal dialling 1 . Press key. 2 . Enter a telephone number. If you enter more than 14 digits, you only see the last 14 digits on the display. 3 . Press key to end the call. Pre-dialling 1 . Enter a telephone nu...
Page 15 - Recall feature; Take two different calls at the same time
BASIC OPERATION 11 Recall feature Recall feature Recall feature can be used when you are using some services provided by your network operators such as “call waiting”, etc. A subscription may apply for these services, contact your network operator for more information. While you are talking on the p...
Page 16 - Recall function when connected to a PABX; Pause feature when using on a PABX; OUTSIDE LINE DIGIT; Handsfree mode; Or
12 BASIC OPERATION Recall function when connected to a PABX If you have connected your telephone to a PABX, you can use all the facilities such as call transfer, automatic recall, etc. The R key provides access to these facilities. Pause feature when using on a PABX Pause feature when using on a PAB...
Page 17 - Speaker volume control
BASIC OPERATION 13 Volume adjustment (with base unit) Volume adjustment (with base unit) Speaker volume control During speakerphone mode, 1 . Press or key to adjust the Speaker volume level: Step 1(lowest) to Step 8 (hightest). 2 . The unit automatically returns to the previous talking mode 2 second...
Page 18 - record number; Review Caller ID records; Phonebook/Direct memory; Caller ID Operation
14 CALLER ID OPERATION If you subscribe to your telephone operators service (charges may apply), numbers of the incoming calls will be displayed on the screen and stored in the call log (please consult your telephone service provider for details). The eco5200 series can store the last 30 calls inclu...
Page 19 - Delete all viewed CID records
CALLER ID OPERATION 15 4 . Press the numeric keys to edit the Phone number. 5 . Press key to confi rm. The record is now saved into the phonebook. Then it goes back to the call log. Delete one or all CID record(s) Delete one or all CID record(s) Delete one CID record While you are viewing the CID re...
Page 20 - This function in only available for handset.; Redial the last number; key again until you have selected your desired; key to redial the last number.
16 LNR FUNCTION This function in only available for handset. Redial the last number Redial the last number Your cordless handset stores the last 3 external numbers dialled, up to 25 digits per number.If the number exceeds 25 digits, the fi rst 25 digits will be stored to memory. During standby mode,...
Page 21 - Store the last number dialled; LNR
LNR FUNCTION 17 Store the last number dialled Store the last number dialled While you are viewing a previously dialled number that you wish to save, 1 . Press key. The display on the right is shown. 2 . Press the numeric keys to enter the Name. If you made a mistake, press key to edit it. 3 . Press ...
Page 22 - Phonebook; Add new records
18 PHONEBOOK Phonebook This function is only available on the handset. Add new records Add new records You can store up to 50 phonebook records in each handset. Each record can contain up to 25 digits per number and 14 characters per name. During standby mode, 1 . Press and hold key. The display on ...
Page 23 - Delete one record
PHONEBOOK 19 While you are viewing the record that you wish to edit, 1 . Press and hold key. The display on the right is shown. 2 . Press key to erase the last character, or press and hold key to erase the entire characters. 3 . Press key to complete editing the Name and proceed to edit the Number. ...
Page 24 - Cordless Handset Operation; Handset ringer melody; appears whenever the ringer is Off.; Handset ringer adjustment; MELODY 3
20 CORDLESS HANDSET OPERATION Cordless Handset Operation Handset ringer melody During standby mode, 1 . Press and hold key. fl ashes and the current melody option appears. 2 . Press or key to select the melody option (1 to 9 for adjustment) . 3 . Press key to confi rm. Handset ringer volume During s...
Page 25 - Multi-handset Operation; • You can make an intercom call when the other handset is in progress.; Intercom function; INT
CORDLESS HANDSET OPERATION 21 Multi-handset Operation Multi-handset Operation Your eco5200 series phone can have up to 4 handsets registered to the base unit. Each handset has its own number HS-1, HS-2, HS-3 and HS-4 shown on the left-hand side of the display. With 2 or more handsets you can: • Make...
Page 26 - Call transfer between cordless handsets
22 CORDLESS HANDSET OPERATION Call transfer between cordless handsets When there is an incoming external call, 1 . Press INT key. The display on the right is shown. 2 . Key the handset number (1, 2, 3, or 4) you wish to transfer. 3 . Press key to exit Intercom mode and return to standby mode. Transf...
Page 27 - Cordless handset keypad lock; Note; Registration; Register new handsets on the eco5200 base; REGISTER
CORDLESS HANDSET OPERATION 23 Cordless handset keypad lock Cordless handset keypad lock During standby mode, 1 . Press and hold key to lock the keypad. 2 . To release keypad lock, press and hold key for 3 seconds. Note : When the keypad is locked, key and INT key can be used to answer an external or...
Page 28 - REMOVE HS; Language setting; LANGUAGE; Remove handsets; REMOVE
24 CORDLESS HANDSET OPERATION REMOVE HS PIN ? REMOVE HS ? Language setting Language setting To select the display language, 1 . Press key during standby mode. 2 . Press or key to select “ LANGUAGE ” from the display. 3 . Press key to enter the mode. 4 . Press or key to select Language options on the...
Page 29 - Reset; RESET; Handset name; NAME
CORDLESS HANDSET OPERATION 25 Reset Reset During standby mode, 1 . Press key. 2 . Press or key to select “ RESET ” from the display. 3 . Press key to enter the mode. The display on the right is shown. 4 . Press the numeric keys to enter the PIN. 5 . Press key to confi rm. Handset name Handset name D...
Page 30 - Answering machine On / Off; Answering Machine Operation
26 ANSWERING MACHINE OPERATION Answering machine On / Off Answering machine On / Off During standby mode, 1 . Press and hold key to switch the answering machine off. “ Answering off ” will be heard followed by two short beeps. Note: During Off mode, the answering machine is set to Announcement Two m...
Page 31 - Answering machine Ring delay Setting
ANSWERING MACHINE OPERATION 27 Answering machine Ring delay Setting Answering machine Ring delay Setting This setting is used to set the ring times. Default number of ring -3 1 . Press and hold 2-9/GS key (bottom of base) for 2 seconds. “ Set rings ” will be heard followed by a short beep, after a p...
Page 32 - Please leave a message after the beep; OGM setting
28 ANSWERING MACHINE OPERATION OGM (Outgoing Messages) OGM (Outgoing Messages) eco5200 has two OGM message modes: OGM1 (Announcement One) mode: Callers can hear a pre-recorded message “ Please leave a message after the beep ” and the unit records the caller's message. OGM2 (Announcement Two) mode: C...
Page 33 - Play OGM; key to play the OGM.
ANSWERING MACHINE OPERATION 29 Play OGM During standby mode, 1 . Press ANS key to play the OGM. 2 . Press key to stop playing and return to standby mode. OGM play to line If an incoming call ring exceeds the number of rings set (Refer to “Answering machine Ring delay Setting” on P27) , the answering...
Page 34 - Record ICM
30 ANSWERING MACHINE OPERATION ICM (Incoming Messages) ICM (Incoming Messages) Record ICM During OGM 1 mode, the machine can record callers’ messages. During recording mode, the light will fl ash. The machine will stop automatically after recording 2 minutes. Or you can stop recording by pressing ke...
Page 35 - Memo; Record memo; Play memo; Play; Delete messages; Delete one message; message erased
ANSWERING MACHINE OPERATION 31 Memo Memo Record memo You can record memos for other users of the unit to hear. The maximum recording time is 2 minutes. During standby mode, 1 . Press and hold MEMO key until you hear a long beep. 2 . Speak into the microphone after the beep. 3 . Press key to stop rec...
Page 36 - Delete all messages; All message erased; Remember to delete messages!; Memory full; Answering Machine Full
32 ANSWERING MACHINE OPERATION Delete all messages While the unit is in standby mode, you can delete all the old messages but not new messages. Press and hold X key until you hear a long beep, and then “ All message erased ” will be heard. It means that the old messages will be deleted, but the new ...
Page 37 - Remote control; (Refer to “Answering machine PIN Number Setting” on P27); Advanced Answering System; Access the answering machine remotely
ADVANCED ANSWERING SYSTEM 33 Remote control Remote control You can access your answering machine when you are away by using any touch tone phone. You have to enter the Security PIN to access the answering machine. The default PIN is 321 (Refer to “Answering machine PIN Number Setting” on P27) . Adva...
Page 38 - Remote operation keys; Call screening; key to talk to the caller. The answering; Cordless handset detection; The message recorded before you pick up the call will be deleted.
34 ADVANCED ANSWERING SYSTEM Remote operation keys Keys on remote phone keypad Operation 1 Replay the current message 1 press twice Skip back to the previous message 2 Play new messages /Pause during playing messages 3 Skip forward to the next message 4 Playback OGM 5 Record a new OGM 6 Stop playbac...
Page 39 - Toll saver; times; (Refer to “Answering machine Ring delay Setting” on P27)
ADVANCED ANSWERING SYSTEM 35 Toll saver Toll saver Toll saver option is useful when using the remote access feature. You can see whether there are new messages or not in your answering machine from a remote location. If your answering machine rings 5 times before answering your call, it means there ...
Page 40 - Customer Support
36 APPENDIX If you feel this product is not working correctly please consult the user guide and en-sure that you are using the product in accordance with the instructions. Remove all extra telephone equipment and connect only this telephone directly to the telephone socket. If the fault is still pre...
Page 41 - Troubleshooting; Appendix
APPENDIX 37 Problem Possible cause(s) Solution(s) No dial tone on the cordless handset. 1. The base unit is not properly connected.2. Too far from the base unit.3. Battery charge is low.4. Incorrect battery polarity.5. Re-register handset (see Page 23). 1. Check CONNECTION to power and telephone lin...
Page 43 - Product Specifi cations
APPENDIX 39 Phone – Oricom eco5200 Specifi cations Frequency range 1.88-1.897 GHz (bandwidth=20MHz) Channel bandwidth 1.728 MH Operating range Up to 300m outdoors, up to 50m indoors Standby time Up to 100 hours Talk time Up to 11 hours Temperature time Operating 0ºC to 40ºC Storage -20ºC to 60ºC Com...
Page 44 - Warranty Information; Exclusion and limitation of liability.; negligence on your part or misuse by you of the product
40 APPENDIX Warranty Information Warranty Information (a) Warranty (Australia). Oricom warrants that the product is free from defects in materials and workmanship for a period of 12 months effective from the date of purchase. This warranty in no way affects your statutory warranty under the Trade Pr...
Page 45 - Notes for operation in New Zealand; Caller ID
APPENDIX 41 Notes for operation in New Zealand Notes for operation in New Zealand The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with the minimum conditions for connection to its network. It indicates no endorsement of the...
Page 46 - Australia; To view the full Oricom range, please visit the Oricom website:; New Zealand
Australia Oricom International Pty Ltd Locked Bag 658,South Windsor NSW 2756, Australia Email: [email protected] Web: www.oricom.com.au Fax: (02) 4574 8898 Ph: 1300 889 785 Customer Support To view the full Oricom range, please visit the Oricom website: www.oricom.com.au New Zealand Atlas Gentec...
